Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Labor will strike for a maximum:
a. 10 days.
b. 84 days.
c. 60 days.
d. 30 days.
e. There is no strike maximum.
by

1 Answer

Answer :

b. 84 days.
by

Related questions

Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. 4 weeks c. 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Description : Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. ... . 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Last Answer : a. 2 weeks

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

Workers will not strike approximately 7 days for a. $1 difference in wages. b. $300 difference in benefit package. c. percentage point difference in Profit Sharing. d. 1 hour difference in training. e. percentage point difference in Annual Raise.

Description : Workers will not strike approximately 7 days for a. $1 difference in wages. b. $300 difference in benefit package. c. percentage point difference in Profit Sharing. d. 1 hour difference in training. e. percentage point difference in Annual Raise.

Last Answer : d. 1 hour difference in training.

Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Description : Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Last Answer : d. At 60 days, demand is 98.5%.

Account Receivables lag impacts sales. At no credit terms, the appeal falls to about ______ %, at 30 days, appeal is _____ %, at 60 days, appeal is ______%. a. 98.5, 92, 65 b. 65, 92, 98.5 c. 70, 85, 99 d. none of the above, there is no impact

Description : Account Receivables lag impacts sales. At no credit terms, the appeal falls to about ______ %, at 30 days, appeal is _____ %, at 60 days, appeal is ______%. a. 98.5, 92, 65 b. 65, 92, 98.5 c. 70, 85, 99 d. none of the above, there is no impact

Last Answer : b. 65, 92, 98.5

In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor’s demand. b. every $300 your Benefits Negotiations Ceiling is beneath Labor’s demand. c. every 1% your Profit Sharing Negotiations Ceiling is beneath Labor’s demand. d. every $1 your Wage Negotiation Ceiling is beneath Labor’s demand. e. all of the above.

Description : In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor's demand. b. every $300 your Benefits Negotiations Ceiling is beneath ... every $1 your Wage Negotiation Ceiling is beneath Labor's demand. e. all of the above.

Last Answer : e. all of the above.

To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current contract. c. all strike settlements should be halfway between the demand and the negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Description : To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current ... negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Last Answer : c. all strike settlements should be halfway between the demand and the negotiation ceiling.

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Description : How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Last Answer : c. Price – (Material cost + Labor cost)

Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Description : Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Last Answer : a. increase demand.

Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Description : Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Last Answer : d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Description : Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Last Answer : d. reduce material costs and administrative costs.

Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Description : Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Last Answer : d. decrease labor costs.

The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Description : The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Last Answer : a. is never more than 150% of the current contract.

The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)/Six Sigma

This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : c. Continuous Product Improvement systems (CPI)

If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Description : If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Last Answer : e. none of the above

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Description : Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Last Answer : d. Administrative Cost.

Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Description : Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Last Answer : c. increase demand.

Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Description : Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Last Answer : c. increase Labor Costs.

Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Description : Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Last Answer : e. all of the above.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Description : The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Last Answer : d. Labor Negotiations.

Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Description : Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Last Answer : a. reduce R&D cycle time.

This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Description : This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Last Answer : d. Quality Initiative Training (QIT)

.If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Description : .If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Last Answer : d. $5.

Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Description : Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Last Answer : c. reduce labor material costs.

Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Description : Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Last Answer : c. reduce material costs.

How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Description : How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Last Answer : c. $0.30

How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Description : How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Last Answer : d. 50 %

The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training days. d. is rooted in unavoidable factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Description : The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training ... factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Last Answer : e. a and d.

In only one product segment, diminishing returns for outside sales is reached at a. 75. b. 12. c. 15. d. 45. e. 30.

Description : In only one product segment, diminishing returns for outside sales is reached at a. 75. b. 12. c. 15. d. 45. e. 30.

Last Answer : b. 12.

In only one product segment, diminishing returns for distributors is reached at a. 75. b. 12. c. 15. d. 45. e. 30.

Description : In only one product segment, diminishing returns for distributors is reached at a. 75. b. 12. c. 15. d. 45. e. 30.

Last Answer : c. 15.

MTBF is measured in a. day increments. b. hour increments. c. minute increments. d. 30-minute increments. e. 15-minute increments.

Description : MTBF is measured in a. day increments. b. hour increments. c. minute increments. d. 30-minute increments. e. 15-minute increments.

Last Answer : b. hour increments.

The A/R lag is a. a marketing spreadsheet definition. b. the accounts receivable lag (in days). c. the time between customers receiving products and when they are expected to pay for them. d. a, b, and c.

Description : The A/R lag is a. a marketing spreadsheet definition. b. the accounts receivable lag (in days). c. the time between customers receiving products and when they are expected to pay for them. d. a, b, and c.

Last Answer : d. a, b, and c.

Maximum issue is a. the upper limit in thousands of dollars that teams can issue in stock this year. b. amount in thousands of dollars that teams wish to issue in stock. c. upper limit of stock that can be bought back in thousands of dollars. d. amount of stock, if any, to buy back. e. none of the above.

Description : Maximum issue is a. the upper limit in thousands of dollars that teams can issue in stock this year. b. amount in thousands of dollars that teams wish to issue in stock. c. upper limit of stock that can be ... thousands of dollars. d. amount of stock, if any, to buy back. e. none of the above.

Last Answer : a. the upper limit in thousands of dollars that teams can issue in stock this year.

Negotiation Ceilings which represent the maximum management is willing to pay are always a. 12% above the starting positions. b. 5% above the starting positions. c. 10% above the starting positions. d. unlimited. e. none of the above.

Description : Negotiation Ceilings which represent the maximum management is willing to pay are always a. 12% above the starting positions. b. 5% above the starting positions. c. 10% above the starting positions. d. unlimited. e. none of the above.

Last Answer : c. 10% above the starting positions.

Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Description : Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Last Answer : d. 1.0; 10.0

Inventory Carrying Cost is ___% of the average cost of production. a. 13 b. 4 c. 10 d. 8 e. 12

Description : Inventory Carrying Cost is ___% of the average cost of production. a. 13 b. 4 c. 10 d. 8 e. 12

Last Answer : e. 12

The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Last Answer : a. $5.10.

.If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Description : .If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Last Answer : a. $60,000

.If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Description : .If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Last Answer : b. $4,600,000

If your interest rate is 12.1%, and when you issue new bonds, the bond interest rate is: a. 10.7%. b. 12.1%. c. 13.5%. d. 6.1%. e. 12%.

Description : If your interest rate is 12.1%, and when you issue new bonds, the bond interest rate is: a. 10.7%. b. 12.1%. c. 13.5%. d. 6.1%. e. 12%.

Last Answer : c. 13.5%.

Depreciation is calculated: a. using a 3-year MACRS. b. using a 5-year MACRS. c. over a straight line 5-year period. d. over a straight line 10-year period. e. over a straight line 15-year period.

Description : Depreciation is calculated: a. using a 3-year MACRS. b. using a 5-year MACRS. c. over a straight line 5-year period. d. over a straight line 10-year period. e. over a straight line 15-year period.

Last Answer : e. over a straight line 15-year period.

Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Description : Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Last Answer : e. 10

Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales opportunities. c. the company produced the right amount and missed no sales opportunities. d. the company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Description : Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales ... company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Last Answer : d. the company under produced and missed sales opportunities.

Which of the following will give your company an AAA bond rating: a. Have contribution margins higher than 30%. b. Have absolutely no debt. c. Retire all of the current outstand stock. d. Pay a dividend that is less than EPS. e. Retire bonds before they are due.

Description : Which of the following will give your company an AAA bond rating: a. Have contribution margins higher than 30%. b. Have absolutely no debt. c. Retire all of the current outstand stock. d. Pay a dividend that is less than EPS. e. Retire bonds before they are due.

Last Answer : b. Have absolutely no debt.