Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Benchmarking reduces
a. Material cost.
b. Research and Development time.
c. Labor Cost.
d. Administrative Cost.
e. Demand.
by

1 Answer

Answer :

d. Administrative Cost.
by

Related questions

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : c. Continuous Product Improvement systems (CPI)

This process management initiative reduces material costs and administrative overhead. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material costs and administrative overhead. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : b. Vendor/Just-in-Time Inventory (JIT)

The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)/Six Sigma

These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems and Just-in-Time Inventory b. Quality Function Deployment and Benchmarking c. Continuous Product Improvement systems (CPI) and Just-in-Time Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Description : These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems ... Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Last Answer : b. Quality Function Deployment and Benchmarking

This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Description : This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Last Answer : d. Quality Initiative Training (QIT)

Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Description : Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Last Answer : a. increase demand.

Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Description : Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Last Answer : d. reduce material costs and administrative costs.

Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Description : Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Last Answer : d. decrease labor costs.

Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Description : Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Last Answer : c. reduce labor material costs.

Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Description : Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Last Answer : d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets.

Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Description : Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Last Answer : c. increase Labor Costs.

Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Description : Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Last Answer : a. reduce R&D cycle time.

This process management initiative reduces R&D cycle time, a. Concurrent Engineering (CCE) b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces R&D cycle time, a. Concurrent Engineering (CCE) b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)

Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Description : Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Last Answer : c. reduce material costs.

Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Description : Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Last Answer : c. increase demand.

This process management initiative increases the effectiveness of the Sales Budget and therefore demand. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative increases the effectiveness of the Sales Budget and therefore demand. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : d. Channel Support systems

The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Description : The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Last Answer : d. Labor Negotiations.

How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Description : How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Last Answer : c. Price – (Material cost + Labor cost)

If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Description : If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Last Answer : e. none of the above

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

.If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Description : .If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Last Answer : d. $5.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Description : Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Last Answer : b. 84 days.

The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Description : The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Last Answer : a. is never more than 150% of the current contract.

Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. 4 weeks c. 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Description : Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. ... . 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Last Answer : a. 2 weeks

Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Description : Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Last Answer : e. all of the above.

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Last Answer : c. MTBF is raised.

In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. c. At the center of each inner fine cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Description : In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. ... cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Last Answer : b. The inner fine cut circles represent the heart of the segment where demand is strong.

In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Description : In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Last Answer : b. Customer Survey Score

Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Description : Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Last Answer : d. At 60 days, demand is 98.5%.

Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Description : Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Last Answer : e. Forecasting Analysis.

Customer demand is driven by a. price, product, promotion and TQM/Process Initiatives. b. customer survey. c. positioning and price. d. market share. e. market share, positioning and price.

Description : Customer demand is driven by a. price, product, promotion and TQM/Process Initiatives. b. customer survey. c. positioning and price. d. market share. e. market share, positioning and price.

Last Answer : b. customer survey.

When plotting the segment locations for each round a. the goal is to determine the ideal spot location for each segment during the 8 years. b. the goal is to determine which products are the highest in demand. c. you use price on one axis and performance on the other. d. you should use Microsoft Excel. e. all of the above.

Description : When plotting the segment locations for each round a. the goal is to determine the ideal spot location for each segment during the 8 years. b. the goal is to determine which products are the highest in ... and performance on the other. d. you should use Microsoft Excel. e. all of the above.

Last Answer : a. the goal is to determine the ideal spot location for each segment during the 8 years.

In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor’s demand. b. every $300 your Benefits Negotiations Ceiling is beneath Labor’s demand. c. every 1% your Profit Sharing Negotiations Ceiling is beneath Labor’s demand. d. every $1 your Wage Negotiation Ceiling is beneath Labor’s demand. e. all of the above.

Description : In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor's demand. b. every $300 your Benefits Negotiations Ceiling is beneath ... every $1 your Wage Negotiation Ceiling is beneath Labor's demand. e. all of the above.

Last Answer : e. all of the above.

To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current contract. c. all strike settlements should be halfway between the demand and the negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Description : To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current ... negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Last Answer : c. all strike settlements should be halfway between the demand and the negotiation ceiling.

Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Description : Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Last Answer : a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center.

A segment manager’s task is to a. decide which products enter the segment. b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the distribution system as compared to competitors. c. review margin potential for each segment and evaluate the capacity for each segment compared to the competition. d. evaluate the capacity for each segment based on total demand and the competitor’s capacity; evaluate the margin potential of all products and the distribution systems. e. none of the above.

Description : A segment manager's task is to a. decide which products enter the segment. b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the ... ; evaluate the margin potential of all products and the distribution systems. e. none of the above.

Last Answer : b. verify the products entering and leaving a segment, the margin potential for those products, capacity level and the distribution system as compared to competitors.

If your company offers no credit terms, demand a. remains constant. b. falls 25%. c. falls 50%. d. falls 65%.

Description : If your company offers no credit terms, demand a. remains constant. b. falls 25%. c. falls 50%. d. falls 65%.

Last Answer : d. falls 65%.

A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut distinction. c. maximize the effectiveness of R&D, to achieve higher demand you must have a substantially better offer, it does not matter how good your product is if you stock out. d. all of the above.

Description : A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut ... , it does not matter how good your product is if you stock out. d. all of the above.

Last Answer : d. all of the above.

What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Description : What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Last Answer : d. All of the above

What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Description : What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Last Answer : e. a, d.

How can assembly lines double their capacity? a. Speed up the production. b. Add a second shift. c. Double the material. d. Build more assembly lines. e. Assembly lines cannot be doubled.

Description : How can assembly lines double their capacity? a. Speed up the production. b. Add a second shift. c. Double the material. d. Build more assembly lines. e. Assembly lines cannot be doubled.

Last Answer : b. Add a second shift.

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products. c. improve business procedures and product quality, resulting in improved efficiencies and costs structures. d. improve product quality resulting in improved cost structures. e. improve product quality and business procedures.

Description : TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, ... quality resulting in improved cost structures. e. improve product quality and business procedures.

Last Answer : b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products.

If all of the capacity on a production line is sold a. all remaining inventory is sold for half the average cost of production. b. a loss is written off on the income statement. c. Capstone interprets the action as a liquidation instruction. d. the company will receive a cash payment of 65% the original investment on capacity. e. all of the above.

Description : If all of the capacity on a production line is sold a. all remaining inventory is sold for half the average cost of production. b. a loss is written off on the income statement. c. Capstone ... company will receive a cash payment of 65% the original investment on capacity. e. all of the above.

Last Answer : e. all of the above.