The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

The company’s negotiation starting position for wages
a. is never more than 150% of the current contract.
b. is always lower than what Labor expects.
c. is always exactly 80% of the current contract.
d. is always half of the increase workers are asking for.
e. none of these.
by

1 Answer

Answer :

a. is never more than 150% of the current contract.
by

Related questions

To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current contract. c. all strike settlements should be halfway between the demand and the negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Description : To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current ... negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Last Answer : c. all strike settlements should be halfway between the demand and the negotiation ceiling.

For Wages, the negotiation Starting Position cannot be less than ____% or more than ____% of the current contract. a. 75; 125 b. 75; 150 c. 80; 125 d. 80; 150

Description : For Wages, the negotiation Starting Position cannot be less than ____% or more than ____% of the current contract. a. 75; 125 b. 75; 150 c. 80; 125 d. 80; 150

Last Answer : d. 80; 150

In the current contract, the workers’ wage rate is $20.00. Which of the following negotiation positions would be outside the starting and ceiling amounts? a. $16.00 to $25.00 b. $18.00 to $30.00 c. $18.00 to $35.00 d. $16.00 to $20.00

Description : In the current contract, the workers’ wage rate is $20.00. Which of the following negotiation positions would be outside the starting and ceiling amounts? a. $16.00 to $25.00 b. $18.00 to $30.00 c. $18.00 to $35.00 d. $16.00 to $20.00

Last Answer : c. $18.00 to $35.00

Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. 4 weeks c. 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Description : Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. ... . 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Last Answer : a. 2 weeks

How are the Starting Position and the Negotiation Ceiling related? a. The Negotiation Ceiling is always 15% above the Starting Position. b. They are not related. c. Their values are equal. d. The Negotiation Ceiling is always 10% beyond the Starting Position. e. The Negotiation Ceiling is always 10% above the Starting Position.

Description : How are the Starting Position and the Negotiation Ceiling related? a. The Negotiation Ceiling is always 15% above the Starting Position. b. They are not related. c. Their values are equal. ... 10% beyond the Starting Position. e. The Negotiation Ceiling is always 10% above the Starting Position.

Last Answer : e. The Negotiation Ceiling is always 10% above the Starting Position.

Negotiation Ceilings which represent the maximum management is willing to pay are always a. 12% above the starting positions. b. 5% above the starting positions. c. 10% above the starting positions. d. unlimited. e. none of the above.

Description : Negotiation Ceilings which represent the maximum management is willing to pay are always a. 12% above the starting positions. b. 5% above the starting positions. c. 10% above the starting positions. d. unlimited. e. none of the above.

Last Answer : c. 10% above the starting positions.

Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Description : Labor Negotiation includes: a. hourly wage. b. benefits. c. profit sharing. d. annual raise. e. all of the above.

Last Answer : e. all of the above.

In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor’s demand. b. every $300 your Benefits Negotiations Ceiling is beneath Labor’s demand. c. every 1% your Profit Sharing Negotiations Ceiling is beneath Labor’s demand. d. every $1 your Wage Negotiation Ceiling is beneath Labor’s demand. e. all of the above.

Description : In the Human Resources section, workers will strike one week for: a. every 1% your Annual Raise Negotiations Ceiling is beneath Labor's demand. b. every $300 your Benefits Negotiations Ceiling is beneath ... every $1 your Wage Negotiation Ceiling is beneath Labor's demand. e. all of the above.

Last Answer : e. all of the above.

If current wages are set at $10/hour, what would be the minimum starting pay that your company would offer? a. $6/hour b. $8/hour c. $10/hour d. $12/hour e. none of the above

Description : If current wages are set at $10/hour, what would be the minimum starting pay that your company would offer? a. $6/hour b. $8/hour c. $10/hour d. $12/hour e. none of the above

Last Answer : b. $8/hour

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

Workers will not strike approximately 7 days for a. $1 difference in wages. b. $300 difference in benefit package. c. percentage point difference in Profit Sharing. d. 1 hour difference in training. e. percentage point difference in Annual Raise.

Description : Workers will not strike approximately 7 days for a. $1 difference in wages. b. $300 difference in benefit package. c. percentage point difference in Profit Sharing. d. 1 hour difference in training. e. percentage point difference in Annual Raise.

Last Answer : d. 1 hour difference in training.

The Competitive Intelligence Officer a. thinks like the competitor by determining how that competitor measures success, looks to the future as to what the competition will do in the next year to two years, and evaluate how the competition can undercut your company’s performance. b. a competitor’s production position. c. monitors the competition on the production analysis portion of the Courier and evaluates the

Description : The Competitive Intelligence Officer a. thinks like the competitor by determining how that competitor measures success, looks to the future as to what the competition will do in the next year ... . c. monitors the competition on the production analysis portion of the Courier and evaluates the

Last Answer : a. thinks like the competitor by determining how that competitor measures success, looks to the future as to what the competition will do in the next year to two years, and evaluate how the competition can undercut your company’s performance.

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Description : Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Last Answer : a. increase demand.

Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Description : Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Last Answer : d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets.

Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Description : Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Last Answer : d. reduce material costs and administrative costs.

Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Description : Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Last Answer : d. decrease labor costs.

Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Description : Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Last Answer : c. increase demand.

Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Description : Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Last Answer : c. increase Labor Costs.

Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Description : Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Last Answer : a. reduce R&D cycle time.

Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Description : Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Last Answer : c. reduce labor material costs.

How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Description : How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Last Answer : d. 50 %

All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Last Answer : d. increased MTBF.

For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. High End preferred Position is located in the lower left of the circle. d. Performance preferred position is located in the lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Description : For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. ... lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Last Answer : c. High End preferred Position is located in the lower left of the circle.

.How many assembly lines are there? a. Always exactly five per company b. One for all companies c. One per company d. None of these.

Description : .How many assembly lines are there? a. Always exactly five per company b. One for all companies c. One per company d. None of these.

Last Answer : d. None of these.

How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Description : How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Last Answer : c. Price – (Material cost + Labor cost)

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Description : Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Last Answer : b. 84 days.

The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)/Six Sigma

This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : c. Continuous Product Improvement systems (CPI)

If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Description : If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Last Answer : e. none of the above

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Description : Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Last Answer : d. Administrative Cost.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Description : The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Last Answer : d. Labor Negotiations.

This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Description : This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Last Answer : d. Quality Initiative Training (QIT)

.If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Description : .If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Last Answer : d. $5.

Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Description : Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Last Answer : c. reduce material costs.

The percentage of workers that left the company last year is the: a. Complement. b. Separated Employees. c. Productivity Index. d. Turnover rate. e. None of the above.

Description : The percentage of workers that left the company last year is the: a. Complement. b. Separated Employees. c. Productivity Index. d. Turnover rate. e. None of the above.

Last Answer : d. Turnover rate.

The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training days. d. is rooted in unavoidable factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Description : The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training ... factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Last Answer : e. a and d.

When the Human Resources module is activated, which areas must be addressed? a. Complement (number of workers) b. Caliber (recruitment of talent of workers) c. Training (time workers spend in training) d. Benefits (retirement planning for workers) e. a, b, and c

Description : When the Human Resources module is activated, which areas must be addressed? a. Complement (number of workers) b. Caliber (recruitment of talent of workers) c. Training (time workers spend in training) d. Benefits (retirement planning for workers) e. a, b, and c

Last Answer : e. a, b, and c

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

If the VF Corporation will be spending £2 million on marketing activities next year and expects to sell 30 million pairs of jeans, the 30 million pairs represents the company's: A)sales potential B)market potential C)sales forecast D)market sales

Description : If the VF Corporation will be spending £2 million on marketing activities next year and expects to sell 30 million pairs of jeans, the 30 million pairs represents the company's: A)sales potential B)market potential C)sales forecast D)market sales

Last Answer : D)market sales

According to Capstone, Complement is best defined as: a. the number of workers in your workforce this year. b. letter from the simulation telling your team you did a good job. c. the number of workers needed to reduce your overtime. d. none of the above

Description : According to Capstone, Complement is best defined as: a. the number of workers in your workforce this year. b. letter from the simulation telling your team you did a good job. c. the number of workers needed to reduce your overtime. d. none of the above

Last Answer : a. the number of workers in your workforce this year.

.A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Description : .A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Last Answer : b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI.

Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the newest technology at the cheapest price. c. High end customers want high performance and small size. d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Description : Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the ... . d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Last Answer : b. Low end customers want the newest technology at the cheapest price.

In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Description : In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Last Answer : b. Customer Survey Score

What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Description : What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Last Answer : e. a, d.

The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare reliability against price. d. a marketing tool used to compare age against position. e. a marketing tool used to compare time against motion.

Description : The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare ... used to compare age against position. e. a marketing tool used to compare time against motion.

Last Answer : a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size.

If the potential bar is lower than the actual, a. the company over produced and missed sales opportunities. b. the company lost sales because other companies over produced. c. the company picked up sales because other companies under produced. d. the company produced as much as last period and under produced nothing. e. the company under produced and missed sales opportunities.

Description : If the potential bar is lower than the actual, a. the company over produced and missed sales opportunities. b. the company lost sales because other companies over produced. c. the company ... as last period and under produced nothing. e. the company under produced and missed sales opportunities.

Last Answer : c. the company picked up sales because other companies under produced.