What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

What is the main function of bracing?
a. To correct any incorrect measurements
b. To enable easy inspection of the scaffold
c. To make the scaffold square
d. To add rigidity to the scaffold
by

1 Answer

Answer :

d. To add rigidity to the scaffold
by

Related questions

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Description : Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Last Answer : c. Every Fifth post

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

What is the minimum size of a square baseplate?

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

Planks must be overlapped a minimum of ------

Description : Planks must be overlapped a minimum of ------

Last Answer : 12 inches.

What is the maximum height allowed between ladder landings?

Description : What is the maximum height allowed between ladder landings?

Last Answer : 6m (or 3 lifts)

The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

What maximum load would you place on a right angle coupler?

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

What is the maximum load you would lift with a gin wheel?

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

What is the minimum height an access ladder must extend above the landing?

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

What minimum width of timber would you use as a soleplate?

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

A process comprising an ongoing consideration and evaluation of the firm's system of quality control, including a periodic inspection of a selection of completed engagements, designed to enable the firm to obtain reasonable assurance that its system of quality control is operating effectively. a. Inspection b. Monitoring c. Peer review d. Engagement quality control review

Description : A process comprising an ongoing consideration and evaluation of the firm's system of quality control, including a periodic inspection of a selection of completed engagements, designed to enable the firm ... effectively. a. Inspection b. Monitoring c. Peer review d. Engagement quality control review

Last Answer : Monitoring

Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to (A) Modulus of rigidity (B) Angle of twist (C) Reciprocal of the length of the shaft (D) Moment of inertia of the shaft section

Description : Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to  (A) Modulus of rigidity  (B) Angle of twist  (C) Reciprocal of the length of the shaft  (D) Moment of inertia of the shaft section 

Last Answer : (D) Moment of inertia of the shaft section 

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

Which of the following is incorrect? a. In torsion equation, we use mean torque b. In torsion equation, we use maximum torque c. Many shafts are designed under combined bending and torsion load d. Shafts are also designed for torsional rigidity

Description : Which of the following is incorrect? a. In torsion equation, we use mean torque b. In torsion equation, we use maximum torque c. Many shafts are designed under combined bending and torsion load d. Shafts are also designed for torsional rigidity

Last Answer : a. In torsion equation, we use mean torque

How can you increase the capacity of an Oracle tablespace? Note: there are 2 correct answers in this question A. Resize the existing data file B. Add a new data file to the existing tablespace C. Enable compression of backup data using Oracle advanced compression D. Increase the value of the database parameter DB_BLOCK_SIZE

Description : How can you increase the capacity of an Oracle tablespace? Note: there are 2 correct answers in this question A. Resize the existing data file B. Add a new data file to ... compression of backup data using Oracle advanced compression D. Increase the value of the database parameter DB_BLOCK_SIZE

Last Answer : B. Add a new data file to the existing tablespace

Which of the following is incorrect regarding a compilation engagement? a. The CPA uses his auditing expertise to collect, classify and summarize financial information. b. The CPA should exercise due care. c. The engagement ordinarily entails reducing detailed data to a manageable and understandable form. d. The procedures performed do not enable the accountant to express any form of assurance.

Description : Which of the following is incorrect regarding a compilation engagement? a. The CPA uses his auditing expertise to collect, classify and summarize financial information. b. The CPA should exercise due ... . d. The procedures performed do not enable the accountant to express any form of assurance.

Last Answer : The CPA uses his auditing expertise to collect, classify and summarize financial information

Which of the following is incorrect regarding a compilation engagement? a. The CPA uses his auditing expertise to collect, classify and summarize financial information. b. The CPA should exercise due care. c. The engagement ordinarily entails reducing detailed data to a manageable and understandable form. d. The procedures performed do not enable the accountant to express any form of assurance

Description : Which of the following is incorrect regarding a compilation engagement? a. The CPA uses his auditing expertise to collect, classify and summarize financial information. b. The CPA should exercise due ... form. d. The procedures performed do not enable the accountant to express any form of assurance

Last Answer : The CPA uses his auditing expertise to collect, classify and summarize financial information.

Mark incorrect option related to international reply coupons a) Not more than 10 International reply coupon or 30 commonwealth reply coupon will be sold to any one individual at any time. b) The coupons can be exchanged in any country which is a member of the UPU c) Reply coupons are intended to enable senders to prepay for a reply. d) Reply coupons are free of cost

Description : Mark incorrect option related to international reply coupons a) Not more than 10 International reply coupon or 30 commonwealth reply coupon will be sold to any one individual at any time. b) The coupons can ... are intended to enable senders to prepay for a reply. d) Reply coupons are free of cost

Last Answer : d) Reply coupons are free of cost

Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Last Answer : (c) Take low radial and heavy loads

Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Description : Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Last Answer : c) Take low radial and heavy loads

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

What is the main function of a Sub Foreign Post Office?: (A) To send direct bags to foreign countries (B) To enable senders/addressees to present documents etc for the dispatch or release of their international articles (C) To function as an intermediary office for closed surface transit bags (D) To expedite the transmission of international mail

Description : What is the main function of a Sub Foreign Post Office?: (A) To send direct bags to foreign countries (B) To enable senders/addressees to present documents etc for the dispatch or ... as an intermediary office for closed surface transit bags (D) To expedite the transmission of international mail

Last Answer : (B) To enable senders/addressees to present documents etc for the dispatch or release of their international articles

I have a German Shepard age 10 with Rer end weakness and barely able to wolk. He weighs 82 lbs and I am looking for wheelchair that will enable him to walk again and easy for me to put on him ?

Description : I have a German Shepard age 10 with Rer end weakness and barely able to wolk. He weighs 82 lbs and I am looking for wheelchair that will enable him to walk again and easy for me to put on him ?

Last Answer : Go to www.seniorpetcareproducts.com. They have great wheelchair for great price. Go to Google and type in "Doggie Wheelchairs". You will get tons of hits, such as the following; http://www.eddieswheels.com/

what- possible side lengths for a rectangular frame are 6 inches, 10 inches, and 12 inches.If all measurements are whole numbers, which dimensions can be used to frame a picture that has an area between 45 and 50 square inches?

Description : what- possible side lengths for a rectangular frame are 6 inches, 10 inches, and 12 inches.If all measurements are whole numbers, which dimensions can be used to frame a picture that has an area between 45 and 50 square inches?

Last Answer : 6 in. by 8 in., 10 in. by 5 in., 12 in. by 4 in.

what= possible side lengths for a rectangular fence are 8 feet, 10 feet, and 12 feet. Marsha wants to fence in an area between 90 and 130 square feet.If the measurements are whole numbers, what dimensions can Marsha use?

Description : what= possible side lengths for a rectangular fence are 8 feet, 10 feet, and 12 feet. Marsha wants to fence in an area between 90 and 130 square feet.If the measurements are whole numbers, what dimensions can Marsha use?

Last Answer : 8 ft. by 12 ft., 10 ft. by 10 ft., 12 ft. by 10 ft.

Pick up the excavation where measurements are made in square metres for payment. (A) Ordinary cuttings up to 1 m (B) Surface dressing up to 15 cm depths (C) Surface excavation up to 30 cm depths (D) Both (b) and (c)

Description : Pick up the excavation where measurements are made in square metres for payment. (A) Ordinary cuttings up to 1 m (B) Surface dressing up to 15 cm depths (C) Surface excavation up to 30 cm depths (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

How do you remove a plugin in a Ruby on Rails application and scaffold?

Description : How do you remove a plugin in a Ruby on Rails application and scaffold?

Last Answer : answered my own question I think. script/generate scaffold lfp_contact didn't load the helpers with the right case sensitivity. change the helper method and was able to run script/server. Hopefully I will be ... keep all my cases lowercase. and I won't use underscores in my naming conventions. ^_^

Where can I recieve scaffold safety training?

Description : Where can I recieve scaffold safety training?

Last Answer : If you are going to be working around scaffolding, you have to have safety training. Training programs are written with OSHA specifications, and you can order training CDs. http://www.affordablesafetytraining.com/tsca.html

Which of the following is/are true concerning wound fibroblasts? A. Fibroblasts synthesize and secrete collagen molecules. B. Wound fibroblasts are derived from blood-borne precursor cells. C. Fibroblasts migrate to a wound along fibrin strands, which are used as a scaffold. D. Large amounts of fibrin or blood clot can act as a physical barrier to fibroblast penetration, which delays normal wound healing.

Description : Which of the following is/are true concerning wound fibroblasts? A. Fibroblasts synthesize and secrete collagen molecules. B. Wound fibroblasts are derived from blood-borne precursor cells. C. ... clot can act as a physical barrier to fibroblast penetration, which delays normal wound healing.

Last Answer : Answer: ACD DISCUSSION: Fibroblasts appear in the wound on about the third day of healing and begin to synthesize and secrete collagen molecules. Wound fibroblasts arrive from cells surrounding ... enzymes, and large amounts of fibrin and blood clot prevent fibroblasts from entering the wound

When should we inspect a scaffold?

Description : When should we inspect a scaffold?

Last Answer : A Scaffolding shall be inspected and tagged after completing erection. Also before each work period or where they are altered, adjusted or subjected to rain or heavy winds. Thereafter the scaffolding shall be examined at least once in every seven days. 

What are the requirements for working on a moving scaffold?

Description : What are the requirements for working on a moving scaffold?

Last Answer : Mobile scaffolding shall be plumb, level and square. It shall only be used and moved on surfaces sufficiently firm and level to ensure stability. It shall be moved only by manually pushing or ... must be provided. The scaffolding shall be inspected and tagged before use by a competent person.

What materials can be placed on a scaffold platform?

Description : What materials can be placed on a scaffold platform? 

Last Answer : All types of construction materials which is used for particular construction activity can be kept on scaffolding platform but before keeping the materials and tools required for the work on the platform ... overload and shall be fitted with falling object protection system like toe board, nets etc.

What are the requirements in placing an access ladder on a scaffold?

Description : What are the requirements in placing an access ladder on a scaffold?

Last Answer : Provide access when scaffold platforms are more than 2 feet above or below a point of access When using ladders, bottom rung must not be more than 24 inches high. Ladder to be at the correct (i ... The ladders should be free from damage and should be colour coded. All access ladders must be tagged.

What is the minimum overlapping of two adjacent planks in a scaffold platform?

Description : What is the minimum overlapping of two adjacent planks in a scaffold platform?

Last Answer : Not less than 12”  

In which conditions a scaffold cannot be erected?

Description : In which conditions a scaffold cannot be erected?

Last Answer : Extreme weather(Strong wind, rain, Ice), ground not stable, safe clearance (minimum feet) can’t be maintained with live wire, certified workers and supervisor are not available permit is available.