Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Where must longitudinal (façade) bracing be installed on a length whose is greater  than its height?
a. Every Third post
b. Every post
c. Every Fifth post
d. Every Second post
by

1 Answer

Answer :

c. Every Fifth post
by

Related questions

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

What is the minimum height an access ladder must extend above the landing?

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

What is the maximum height allowed between ladder landings?

Description : What is the maximum height allowed between ladder landings?

Last Answer : 6m (or 3 lifts)

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

Planks must be overlapped a minimum of ------

Description : Planks must be overlapped a minimum of ------

Last Answer : 12 inches.

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

What maximum load would you place on a right angle coupler?

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

What is the maximum load you would lift with a gin wheel?

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

What minimum width of timber would you use as a soleplate?

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

What is the minimum size of a square baseplate?

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

There is no such thing as second , third , fourth , fifth love. When people fall in love , every love is first love. "- Whose quote ?

Description : There is no such thing as second , third , fourth , fifth love. When people fall in love , every love is first love. "- Whose quote ?

Last Answer : Humayun Azad.

If a new state of the Indian Union is to be created, which one of the following schedules of the constitution must be amended? (1) First (2) Second (3) Third (4) Fifth

Description : If a new state of the Indian Union is to be created, which one of the following schedules of the constitution must be amended? (1) First (2) Second (3) Third (4) Fifth

Last Answer : (1) First Explanation: The states and UTs of India are specified in the first schedule. So to form a new state and alteration of area requires the amendment of first schedule of the constitution. ... and territories of India, lists any changes to their borders and the laws used to make that change.

The significant wave height is defined is the average height of the (A) One-third highest waves (B) One-fourth highest waves (C) One-fifth highest waves (D) One-tenth highest waves

Description : The significant wave height is defined is the average height of the (A) One-third highest waves (B) One-fourth highest waves (C) One-fifth highest waves (D) One-tenth highest waves

Last Answer : (A) One-third highest waves

Rajya Sabha being a Permanent house (1) one-third of its members retire every two years (2) one-half of its members retire every three years (3) one-fifth of its members retire every year (4) one-sixth of its members retire every year

Description : Rajya Sabha being a Permanent house (1) one-third of its members retire every two years (2) one-half of its members retire every three years (3) one-fifth of its members retire every year (4) one-sixth of its members retire every year

Last Answer : (1) one-third of its members retire every two years Explanation: The Rajya Sabha is a permanent body and is not subject to dissolution. However, one third of the members retire every second year, and are replaced by newly elected members. Each member is elected for a term of six years.

There are five numbers, the second number is 25% more than the first or third number, the 4th number is 5/4 of the third number and the fifth number is 3/2of the 3rd number. What is the average of 5 numbers if the first number is 10? A) 12.5 B) 12 C) 13 D) 10

Description : There are five numbers, the second number is 25% more than the first or third number, the 4th number is 5/4 of the third number and the fifth number is 3/2of the 3rd number. What is the average of 5 numbers if the first number is 10? A) 12.5 B) 12 C) 13 D) 10

Last Answer : B) Let us consider 5 numbers are A,B,C,D and E B=125/100×A B=125/100×C 125/100×A=125/100×C A/C=1/1 D=5/4×c E=3/2*C First number is 10, A=10=x B=25% ×10+10=12.5 C=10 D=5/4×10=12.5 E=3/2×C=15 Required average=10+12.5+10+12.5+15/5=12

If you like pretty gems that sparkle and shine, I invite you to dig in my virtual mine. My first is purple, fit for a king, My second is green where Dorothy did her thing. My third is red, July's birthstone as well, My fourth is seen in strings and is found inside a shell. My fifth is hard, pure Carbon and expensive to buy, My sixth is Crocodolite, striped like the big cat's eye. Seventh is two words, a man-made fake of April's stone, Eighth is very dark and found at Lightning Ridge alone. Now take from each gem, one letter in its turn, And you will find the stuff for which even the god's yearn. -Riddles

Description : If you like pretty gems that sparkle and shine, I invite you to dig in my virtual mine. My first is purple, fit for a king, My second is green where Dorothy did her thing. My third is red, July's ... gem, one letter in its turn, And you will find the stuff for which even the god's yearn. -Riddles

Last Answer : Ambrosia The gems are: Amethyst Emerald ( Emerald City in the Wizard of Oz ) Ruby Pearl Diamond Tiger's eye Cubic Zirconium (Fake diamond) Black Opal Taking the first letter of Amethyst, second of Emerald, etc.. gives Ambrosia - The food of the gods.

To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act (A) At the centre of the base (B) Within the middle third of the base (C) Within the middle fifth of the base (D) Neither (a), (b) nor (c)

Description : To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act (A) At the centre of the base (B) Within the middle third of the base (C) Within the middle fifth of the base (D) Neither (a), (b) nor (c)

Last Answer : Answer: Option B

I am a five-digit whole number, read the same forward, backward and upside down. My second digit is half my third digit; my fifth digit is the product of my first and last digits; and the sum of my whole is ten. What am I? -Riddles

Description : I am a five-digit whole number, read the same forward, backward and upside down. My second digit is half my third digit; my fifth digit is the product of my first and last digits; and the sum of my whole is ten. What am I? -Riddles

Last Answer : 10801

What is the 4 digit number in which the first digit is one-fifth of the last, and the second and third digits are the last digit multiplied by 3? -Riddles

Description : What is the 4 digit number in which the first digit is one-fifth of the last, and the second and third digits are the last digit multiplied by 3? -Riddles

Last Answer : 1155

We are little Verbal creatures. Each of us with different features. The first of us in glass is set. The second you can find in jet. The third is trapped in tin. The fourth is boxed within. Now the fifth may try and hide, but it can never leave your side. An adopted sibling we also have but, he only appears when pigs fly. What are we? -Riddles

Description : We are little Verbal creatures. Each of us with different features. The first of us in glass is set. The second you can find in jet. The third is trapped in tin. The fourth is boxed within. Now the ... side. An adopted sibling we also have but, he only appears when pigs fly. What are we? -Riddles

Last Answer : The vowels A, E, I, O, U and sometimes Y.

Which word is the odd one out: First, Second, Third, Forth, Fifth, Sixth, Seventh, and Eighth? -Riddles

Description : Which word is the odd one out: First, Second, Third, Forth, Fifth, Sixth, Seventh, and Eighth? -Riddles

Last Answer : Forth, is incorrectly spelled. It should be Fourth.

Your a bus driver. At your first stop, you pick up five people. At the second stop you pick up two people. At the third stop you drop off three people. At the fourth stop you pick up three more people. At the fifth stop you drop off 8 people. How old is the bus driver? -Riddles

Description : Your a bus driver. At your first stop, you pick up five people. At the second stop you pick up two people. At the third stop you drop off three people. At the fourth stop you pick up three more people. At the fifth stop you drop off 8 people. How old is the bus driver? -Riddles

Last Answer : Your the bus driver so he is your age.

Which word is the odd one out: First Second Third Forth Fifth Sixth Seventh Eighth? -Riddles

Description : Which word is the odd one out: First Second Third Forth Fifth Sixth Seventh Eighth? -Riddles

Last Answer : Forth. It is incorrectly spelled.

My first is in wield, sever bones and marrow. My second is in blade, forged in cold steel. My third is in arbalest, and also in arrows. My fourth is in power, plunged through a shield. My fifth is in honour, and also in vows My last will put an end to it all.What am I? -Riddles

Description : My first is in wield, sever bones and marrow. My second is in blade, forged in cold steel. My third is in arbalest, and also in arrows. My fourth is in power, plunged through a shield. My fifth is in honour, and also in vows My last will put an end to it all.What am I? -Riddles

Last Answer : A weapon!

What is the formula for the quiz-What is the 4 digit number in which the first digit is one-fifth of the last and the second and third digits are the last digit multiplied by 3?

Description : What is the formula for the quiz-What is the 4 digit number in which the first digit is one-fifth of the last and the second and third digits are the last digit multiplied by 3?

Last Answer : Need answer

How did you arrive at the answer of 1155 for What is the 4 digit number in which the first digit is one-fifth of the last and the second and third digits are the last digit multiplied by 3?

Description : How did you arrive at the answer of 1155 for What is the 4 digit number in which the first digit is one-fifth of the last and the second and third digits are the last digit multiplied by 3?

Last Answer : There are only two single-digit numbers where one is 1/5 of theother. Those are 1 and 5 and they become the outside numbers. Fromthere, it's relatively easy to multiply 5 by 3 to get 15 for theinside numbers.

The position of Indian Railways network in the world is [SSC Grad 2011] (a) second (b) third (c) fourth (d) fifth shop.ssbcrack.com

Description : The position of Indian Railways network in the world is [SSC Grad 2011] (a) second (b) third (c) fourth (d) fifth shop.ssbcrack.com

Last Answer : Ans: (c)

The position of Indian Railways network in the world is – (1) second (2) third (3) fourth (4) fifth

Description : The position of Indian Railways network in the world is – (1) second (2) third (3) fourth (4) fifth

Last Answer : (3) fourth Explanation: Rail transport is a commonly used mode of long-distance transportation in India. It is the 4th largest railway network in the world, transporting over 10 billion ... eight states and three union tenitories and also provide limited service to Nepal, Bangladesh and Pakistan.

Which particular generation of computers is associated with artificial intelligence? a) Second b) Fourth c) Fifth d) Third

Description : Which particular generation of computers is associated with artificial intelligence? a) Second b) Fourth c) Fifth d) Third

Last Answer : c) Fifth

Uttar Pradesh is occupying which place in India, for Guava production ? (A) Second (B) First (C) Third (D) Fifth

Description : Uttar Pradesh is occupying which place in India, for Guava production ? (A) Second (B) First (C) Third (D) Fifth

Last Answer : (A) Second

India’s place in coconut production in the world is- a. fourth b. first c. third d. second e. fifth

Description : India’s place in coconut production in the world is- a. fourth b. first c. third d. second e. fifth

Last Answer : d. second

Which five year plan preceded the rolling plan? a. second b. third c. fifth d. sixth

Description : Which five year plan preceded the rolling plan? a. second b. third c. fifth d. sixth

Last Answer : c. fifth

Industrial development was the priority of which Plan? (a) Fifth Five Year Plan (b) Second Five Year Plan (c) Third Five Year Plan (d) First Five Year Plan

Description : Industrial development was the priority of which Plan? (a) Fifth Five Year Plan (b) Second Five Year Plan (c) Third Five Year Plan (d) First Five Year Plan

Last Answer : (b) Second Five Year Plan