What is the maximum height allowed between ladder landings?

What is the maximum height allowed between ladder landings?
by

1 Answer

Answer :

6m (or 3 lifts)
by

Related questions

What is the minimum height an access ladder must extend above the landing?

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Description : Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Last Answer : c. Every Fifth post

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

What maximum load would you place on a right angle coupler?

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

What is the maximum load you would lift with a gin wheel?

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

Planks must be overlapped a minimum of ------

Description : Planks must be overlapped a minimum of ------

Last Answer : 12 inches.

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What minimum width of timber would you use as a soleplate?

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

What is the minimum size of a square baseplate?

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as (A) wl²/4 (B) wl²/8 (C) wl²/10 (D) wl²/12

Description : If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as (A) wl²/4 (B) wl²/8 (C) wl²/10 (D) wl²/12

Last Answer : Answer: Option B

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

How do you feel about the 40th anniversary of moon landings?

Description : How do you feel about the 40th anniversary of moon landings?

Last Answer : I myself do not fell excited in any way. That may be connected with the fact that I could not have vitnised it live because I am to young. If the moon landing is fake or not? Though there were/still are ... . So then again, mabye I do not feel any excitement, but for cirten I can say, I am proud.

Do you think NASA faked the moon landings in the 60's?

Description : Do you think NASA faked the moon landings in the 60's?

Last Answer : No. You’re an idiot if you do.

Do personalized luggage tags make airport landings faster?

Description : Do personalized luggage tags make airport landings faster?

Last Answer : Yes, personal luggage tags make it easier to locate and take your bags after your flight. This speed up the process quite a bit since many people have the same type of luggage.

What was the operational name for the D-Day landings in June 1944?

Description : What was the operational name for the D-Day landings in June 1944?

Last Answer : Operation Overlord

What is the currency requirement for a pilot? a. 3 take-offs and landings on an aeroplane of the same type within the last 90 days b. 3 take-offs and landings on an aeroplane of the same type within the last 60 days c. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 90 days d. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 60 days

Description : What is the currency requirement for a pilot? a. 3 take-offs and landings on an aeroplane of the same type within the last 90 days b. 3 take-offs and landings on an aeroplane of the same ... 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 60 days

Last Answer : c. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 90 days

On which beach did the Americans run into a firestorm of resistance during the D-Day landings?

Description : On which beach did the Americans run into a firestorm of resistance during the D-Day landings?

Last Answer : Omaha

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

A tall plant is crossed with a short plant. If the tall F1 pea plants are allowed to self-pollinate, a. the offspring will be of medium height. b. all of the offspring will be tall. c. all of the offspring will be short. d. some of the offspring will be tall, and some will be short.

Description : A tall plant is crossed with a short plant. If the tall F1 pea plants are allowed to self-pollinate, a. the offspring will be of medium height. b. all of the offspring will be tall. c. all of the offspring will be short. d. some of the offspring will be tall, and some will be short.

Last Answer : d. some of the offspring will be tall, and some will be short.

When is having a borrowed ladder from the movie GATTACA legit or ethical?

Description : When is having a borrowed ladder from the movie GATTACA legit or ethical?

Last Answer : Love that movie.

Do you sometimes feel you're playing game of "snake and ladder" in real life?

Description : Do you sometimes feel you're playing game of "snake and ladder" in real life?

Last Answer : I sleep until it goes away. Having money helps. I run my life like a game and try to make a profit from sure bets.

Do you feel more comfortable on a self supporting, "A" frame type of tall ladder, or one that leans against a tree, or house, for support?

Description : Do you feel more comfortable on a self supporting, "A" frame type of tall ladder, or one that leans against a tree, or house, for support?

Last Answer : With regular ladders I always fear that the base will slide backwards. On the other hand, A-type ladders seem awfully wobbly and prone to tipping over. I prefer permanently affixed ladders.

[Fluff time] You fall off a 12ft ladder which peril would be best to fall on or in?

Description : [Fluff time] You fall off a 12ft ladder which peril would be best to fall on or in?

Last Answer : Fire ant mound. The much lesser of all the other evils like impalement on the spiked gate,cut to ribbons on the glass table, the agony of having to have thorns and cactus needles extracted. Hit the fire ant mound and hopefully be able to sprint away fast.

Can anyone recommend a good book for Women Climbing the Corporate Ladder?

Description : Can anyone recommend a good book for Women Climbing the Corporate Ladder?

Last Answer : answer:When I was training to be CNO, my current CNO recommended First break all the rules and Now discover your strengths . She also recommended getting the Journal of Nursing Administration. Personally, ... to spend time with her in that role was better than any book I've read about management.

Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Description : Does anybody know an easy way to draw your own electrical/electronic diagrams in ladder or schematic drawings on your computer?

Last Answer : here is some software that claims to allow you to draw your own circuits, it also claims to be free. however as i have never used it my self i cant say for sure.

Is the first a in Nevada pronounced like ladder or larder?

Description : Is the first a in Nevada pronounced like ladder or larder?

Last Answer : Like ladder.

Do you enjoy watching house flippers fail miserably on shows like Property Ladder?

Description : Do you enjoy watching house flippers fail miserably on shows like Property Ladder?

Last Answer : I watched Flip That House once, and this really annoying lady was on it. She was constantly complaining and she had no idea what she was doing. By the end of the show she still hadn’t sold the house; I couldn’t help but feel kind of happy. lurve for schadenfreude

What are the five stages in the Ladder of Problem Solving from "Thinking through Problem Solving"?

Description : What are the five stages in the Ladder of Problem Solving from "Thinking through Problem Solving"?

Last Answer : answer:http://www.changethis.com/21.ThinkingThrough The five stages: detection, inclination, capability, inquiry, skilled-response, and directed response. I know that's six. Maybe you only use one or the other of the last two?

From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Last Answer : c.Both A & B

From the following in which FMS layout robots are used as material handling system a.Ladder layout b.Open field layout c.Loop layout d.Robot centered layout

Description : From the following in which FMS layout robots are used as material handling system a.Ladder layout b.Open field layout c.Loop layout d.Robot centered layout

Last Answer : d.Robot centered layout

From the following which FMS layout is combination of many loop and ladder layout a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Description : From the following which FMS layout is combination of many loop and ladder layout a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Last Answer : b.Open field layout

From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Description : From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Last Answer : a.Ladder layout

From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above

Description : From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above

Last Answer : c.Loop layout

From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Last Answer : b.In line layout