Planks must be overlapped a minimum of ------

Planks must be overlapped a minimum of ------
by

1 Answer

Answer :

12 inches.
by

Related questions

The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

What is the minimum height an access ladder must extend above the landing?

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

What minimum width of timber would you use as a soleplate?

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

What is the minimum size of a square baseplate?

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Description : Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Last Answer : c. Every Fifth post

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

What is the maximum height allowed between ladder landings?

Description : What is the maximum height allowed between ladder landings?

Last Answer : 6m (or 3 lifts)

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What maximum load would you place on a right angle coupler?

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

What is the maximum load you would lift with a gin wheel?

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

What is the minimum overlapping of two adjacent planks in a scaffold platform?

Description : What is the minimum overlapping of two adjacent planks in a scaffold platform?

Last Answer : Not less than 12”  

Spooling handles the overlapped processing of I/O and same job. -Technology

Description : Spooling handles the overlapped processing of I/O and same job. -Technology

Last Answer : FalseIt is a process of sending data to a spool or temporary storage area in the computer’s memory.

How do I fix an overlapped I/O opration is in progress error

Description : How do I fix an overlapped I/O opration is in progress error

Last Answer : It seems you need this plug in as it has the updates needed to make the program work better > http://forum.make-the-cut.com/discussion/15331/klic-n-kut-plug-in-available-updated

In which type of cropping different crops are planted in proximity for any of a number of different reasons, including pest control, pollination, providing habitat for beneficial creatures, maximizing use of space, and to otherwise increase crop productivity? a. Companion Cropping b. Mixed Croppingc. Overlapped croppingd. Intercropping

Description : In which type of cropping different crops are planted in proximity for any of a number of different reasons, including pest control, pollination, providing habitat for beneficial creatures, ... crop productivity? a. Companion Cropping b. Mixed Cropping c. Overlapped cropping d. Intercropping

Last Answer : a. Companion Cropping

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Mention the two planks on which the current anti-poverty strategy of the government is based. -Economics 9th

Description : Mention the two planks on which the current anti-poverty strategy of the government is based. -Economics 9th

Last Answer : The current anti-poverty strategy of the government is based broadly on two boards, being, promotion of economic growth and targeted anti-poverty programmes.

The number of planks of dimensions (4 m x 50cm x 20cm) that can be stored in a pit which is 16 m long, 12 m wide and 40 m deep is -Maths 9th

Description : The number of planks of dimensions (4 m x 50cm x 20cm) that can be stored in a pit which is 16 m long, 12 m wide and 40 m deep is -Maths 9th

Last Answer : Length of the plank=4m=400cm Breadth=50cm Height=20cm Volume of the plank=L*B*H =400*50*20 =400000cm^3 Length of the pit=16m=1600cm Breadth=12m=1200cm Height=4m=400cm Volume of the pit= L ... *1200*400 =768000000cm^3 Number of planks that can be fitted= 768000000/400000 =1920 planks is the answer.

The number of planks of dimensions (4 m x 50cm x 20cm) that can be stored in a pit which is 16 m long, 12 m wide and 40 m deep is -Maths 9th

Description : The number of planks of dimensions (4 m x 50cm x 20cm) that can be stored in a pit which is 16 m long, 12 m wide and 40 m deep is -Maths 9th

Last Answer : Solution of this question

How many planks each of which is 2 m long, -Maths 9th

Description : How many planks each of which is 2 m long, -Maths 9th

Last Answer : 2 m = 2 x 100 cm = 200 cm, 6 m = 6 x 100 = 600 cm Number of planks = Volume of wooden block/ Volume of each plank = 600 x 18 x 44/200 x 3 x 4 = 198.

Can the planks get moldy in the attic if we cover them with cover?

Description : There is already a vapor-permeable foil underneath.

Last Answer : The point is to properly insulate the slab, because then no heat bridge will be created, which could cause it to condense. So if the slab is properly filled with cotton or other insulation, you don’t have to be afraid of moisture, that is, mold.  

Mesh or planks

Description : What makes a better fence? At first I wanted a mesh, but now I'm thinking about a plank fence. It's better to paint and it's not as visible in the garden, is it? Thanks for the feedback

Last Answer : If you have access to wood or you don't have to count every crown, then planks or slats are much nicer and they seem more practical to me.

How to store wooden planks?

Description : I'll put them in the garage but it's damp, should I put them in plastic?

Last Answer : if they don't have moisture, they don't mind them, but you have to stretch them ... and load them ... 8-)) ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

How To Grill With Cedar Planks?

Description : How To Grill With Cedar Planks?

Last Answer : If you are a backyard chef, a grill is probably in your arsenal when cooking for friends or family. Using cedar planks for direct grilling can give not only a unique flavor, but a fresh new ... taste from the planks into fish and other meats by simply using a few steps to extract the flavor.

Plank's constant has the dimensions of (1) energy (2) linear momentum (3) angular momentum (4) force

Description : Plank's constant has the dimensions of (1) energy (2) linear momentum (3) angular momentum (4) force

Last Answer : (1) energy Explanation: The Planck's constant (h) can be defined as a pro-portionality constant that relates the energy (E) of a photon to the frequency (?) of its associated electro-magnetic ... Planck constant is named after Max Planck, the instigator of quantum theory, who discovered it in 1900.

Which one of the following is a nondimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscosity (4) Plank's constant

Description : Which one of the following is a nondimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscosity (4) Plank's constant

Last Answer : (2) Strain Explanation: A dimensionless quantity is simply a quantity that has no units and therefore no dimensions. A ratio between two numbers is a non-dimensional or dimensionless quantity. ... in dimension over original dimension has no dimensional formula. So it is a. dimensionless quantity.

Unit of plank’s constant is –

Description : Unit of plank’s constant is –

Last Answer : JS

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Description : Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Last Answer : Answer: Option C

The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law

Description : The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law

Last Answer : D. Plank’s law

When light is traveling through a vacuum, what is the product of the light's wavelength and frequency equal to? w) speed of light x) Plank's constant y) momentum z) wave number

Description : When light is traveling through a vacuum, what is the product of the light's wavelength and frequency equal to? w) speed of light x) Plank's constant y) momentum z) wave number

Last Answer : ANSWER: W -- SPEED OF LIGHT

Plank’s constant has the dimensions of : (1) energy (2) linear momentum (3) angular momentum (4) force

Description : Plank’s constant has the dimensions of : (1) energy (2) linear momentum (3) angular momentum (4) force

Last Answer : energy

Which one of the following is a non-dimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscocity (4) Plank’s constant

Description : Which one of the following is a non-dimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscocity (4) Plank’s constant

Last Answer : Strain