Which of the following characterist Which of the following characteristics is most ics is most typical of a continuous manufactur typical of a continuous manufacturing organization? a)The firm manufactures customized product. b)The firm has a low volume of production c)The firm has a relatively low unit cost of production d)The firm creates many different products with many different characteristics

Which of the following characterist Which of the following characteristics is most ics is most typical of a continuous manufactur typical of a continuous manufacturing
organization?

a)The firm manufactures customized product.
b)The firm has a low volume of production
c)The firm has a relatively low unit cost of production
d)The firm creates many different products with many different characteristics
by

1 Answer

Answer :

d)The firm creates many different products with many different characteristics
by

Related questions

An aggregate plan for a manufactur An aggregate plan for a manufacturing firm includes ing firm includes consideration of: consideration of: a)Production rates b)work-force levels c)Inventory holdings

Description : An aggregate plan for a manufactur An aggregate plan for a manufacturing firm includes ing firm includes consideration of: consideration of: a)Production rates b)work-force levels c)Inventory holdings

Last Answer : b)work-force levels

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

By using a wholesaler, Inversoft Ltd. has a distinct advantage because the specialised services performed by the wholesaler allow the firm to: A)focus on developing and manufacturing products that match consumers' needs and wants. B)focus on increasing production capacity and efficiency C)reduce manufacturing costs to retailers and provide quality merchandise to consumers.

Description : By using a wholesaler, Inversoft Ltd. has a distinct advantage because the specialised services performed by the wholesaler allow the firm to: A)focus on developing and manufacturing ... capacity and efficiency C)reduce manufacturing costs to retailers and provide quality merchandise to consumers.

Last Answer : A)focus on developing and manufacturing products that match consumers' needs and wants.

(d) Rs 1.50 Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production overheads 54,000 58,000 62,000 Other overheads 40,000 40,000 40,000 Total Cost 304,000 343,000 382,000 What would be the total cost in a budget that is prepared at the 77% level of activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

A company manufactures a single product for which cost and selling price data are as follows: Selling price per unit - Rs. 12 Variable cost per unit - Rs. 8 Fixed cost for a period - Rs. 98,000 Budgeted sales for a period - 30,000 units

Description : A company manufactures a single product for which cost and selling price data are as follows: Selling price per unit - Rs. 12 Variable cost per unit - Rs. 8 Fixed cost for a period - Rs. 98,000 Budgeted sales for a period - 30,000 units

Last Answer : (a) 20%

Which of the following statements is most correct? A. For small companies, long-term debt is the principal source of external financing. B. Current assets of the typical manufacturing firm account for over half of its total assets. C. Strict adherence to the maturity matching approach to financing wD. Similar to the capital structure management, working capital management requires the financial manager to make a decision and not address the issue again for several months.ould call for all current assets to be financed solely with current liabilities.

Description : Which of the following statements is most correct? A. For small companies, long-term debt is the principal source of external financing. B. Current assets of the typical manufacturing firm account ... the financial manager to make a decision and not address the issue again for several months.

Last Answer : B. Current assets of the typical manufacturing firm account for over half of its total assets.

Match List I (Layers of Atmosphere) and List II (Characteristics) and select the correct answer using the code given below. L ist I L i st I I (L ayer of (Char acter ist ics) At mospher e) A. Ionosphere I. Contains Ozone B. Stratosphere II. Reflects radio Waves C. Exosphere III. Fall in Temperature D. Troposphere IV. Extremely low air density (1) A-II, B-III, C-IV, D-I (2) A-II, B-I, C-IV, D-III (3) A-II, B-III, C-I, D-IV (4) A-III, B-I, C-IV, D-II

Description : Match List I (Layers of Atmosphere) and List II (Characteristics) and select the correct answer using the code given below. L ist I L i st I I (L ayer of (Char acter ist ics) At mospher e) A. Ionosphere I. Contains Ozone B. ... D-III (3) A-II, B-III, C-I, D-IV (4) A-III, B-I, C-IV, D-II

Last Answer : 2) A-II, B-I, C-IV, D-III

In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Last Answer : d.Both A & B

Digital products are best suited for B2C e-commerce because they: a. Are commodity like product b. Can be mass-customized and personalized c. Can be delivered at the time of purchase d. All of the above

Description : Digital products are best suited for B2C e-commerce because they: a. Are commodity like product b. Can be mass-customized and personalized c. Can be delivered at the time of purchase d. All of the above

Last Answer : d. All of the above

When Graphic Products decided to go international with its marketing effort, it adopted a totally global approach. Which one of the following factors did GP MOST likely experience difficulty with as the firm applied a global strategy for marketing? A) Branding B) Product characteristics C) Packaging D) Labeling E) Advertising

Description : When Graphic Products decided to go international with its marketing effort, it adopted a totally global approach. Which one of the following factors did GP MOST likely experience difficulty with as the ... ? A) Branding B) Product characteristics C) Packaging D) Labeling E) Advertising

Last Answer : E) Advertising

The concept that consumers will favor those products which offer maximum quality performance and features and asks for continuous product improvement is 1. Marketing concept 2. Product concept 3. Production concept 4. All the above 5. None of these

Description : The concept that consumers will favor those products which offer maximum quality performance and features and asks for continuous product improvement is 1. Marketing concept 2. Product concept 3. Production concept 4. All the above 5. None of these

Last Answer : Marketing concept

these levels of the ics organization may have deputy positions -General Knowledge

Description : these levels of the ics organization may have deputy positions -General Knowledge

Last Answer : Branch Incident Commander Section.

Which acid is used in Soap manufactur- ing?

Description : Which acid is used in Soap manufactur- ing?

Last Answer : Sodium hydroxide

Which among the following is / are characteristics of common market ? 1. A common external trade policy exists 2. There are no trade barriers among members 3. Creates mobility of factors of production 4. All of these 5. None of these

Description : Which among the following is / are characteristics of common market ? 1. A common external trade policy exists 2. There are no trade barriers among members 3. Creates mobility of factors of production 4. All of these 5. None of these

Last Answer : All of these

Which among the following is / are characteristics of common market ? 1. a common external trade policy exists 2. there are no trade barriers among members 3. creates mobility of factors of production 4. all of these 5. none of these

Description : Which among the following is / are characteristics of common market ? 1. a common external trade policy exists 2. there are no trade barriers among members 3. creates mobility of factors of production 4. all of these 5. none of these

Last Answer : all of these

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

------ pricing is possible when a firm is able to reduce its manufacturing costs at a predictable rate through improved methods, materials, skills, and machinery. A)experience -curve B)price leader C)manufacturing based D)production -curve

Description : ------ pricing is possible when a firm is able to reduce its manufacturing costs at a predictable rate through improved methods, materials, skills, and machinery. A)experience-curve B)price leader C)manufacturing based D)production-curve

Last Answer : A)experience-curve

Mention the important characteristics of digital IC’s?

Description : Mention the important characteristics of digital IC’s?

Last Answer : • Fan out • Power dissipation • Propagation Delay • Noise Margin • Fan In • Operating temperature • Power supply requirements

Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ployment ) A. Seasonal I. Occurs during boom or recession in the economy B. Frictional II. An absence of demand for a certain type of workers C. Disguised III. Occurs when moving from one job to another D. Structural IV. Actual contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Description : Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ... contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Last Answer : (1) A-V, B-III, C-IV, D-II, E-I

7. Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Description : 7. Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Last Answer : d) Type of broadband company used by the firm

Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Description : Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Last Answer : d) Type of broadband company used by the firm

Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Description : Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Last Answer : d) Type of broadband company used by the firm

Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Description : Before performing any penetration test, through legal procedure, which key points listed below is not mandatory? a) Know the nature of the organization b) Characteristics of work done in the firm c) System and network d) Type of broadband company used by the firm

Last Answer : d) Type of broadband company used by the firm

1. Which of the following concepts represents the extra revenue a firm receives from the services of an additional unit of a factor of production? a. total revenue b. marginal physical product c. marginal revenus product d. marginal revenue

Description : 1. Which of the following concepts represents the extra revenue a firm receives from the services of an additional unit of a factor of production? a. total revenue b. marginal physical product c. marginal revenus product d. marginal revenue

Last Answer : c. marginal revenus product

Typical differences between goods and services do not include (a) cost per unit ; (b) ability to inventory items ; (c) timing of production and consumption (d) knowledge content

Description : Typical differences between goods and services do not include (a) cost per unit ; (b) ability to inventory items ; (c) timing of production and consumption (d) knowledge content

Last Answer : (a) cost per unit ;

In a manufacturing industry, breakeven point occurs, when the (A) Total annual rate of production equals the assigned value (B) Total annual product cost equals the total annual sales (C) Annual profit equals the expected value (D) Annual sales equals the fixed cost

Description : In a manufacturing industry, breakeven point occurs, when the (A) Total annual rate of production equals the assigned value (B) Total annual product cost equals the total annual sales (C) Annual profit equals the expected value (D) Annual sales equals the fixed cost

Last Answer : (B) Total annual product cost equals the total annual sales

Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General expenses = administrative expenses + distribution & marketing expenses (C) Total product cost = manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Description : Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General ... manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Last Answer : (D) Total product cost = direct production cost + plant overhead cost

Which of th rather than a manufacturing firm? of the following is most likely to kely to affect the location deci on decision of a service firm a. energy and utility utility costs b. attitude attitude toward unions c. parking and access d. cost of shipping shipping finished finished goods e. labor costs

Description : Which of th rather than a manufacturing firm? of the following is most likely to kely to affect the location deci on decision of a service firm a. energy and utility utility costs b. attitude ... unions c. parking and access d. cost of shipping shipping finished finished goods e. labor costs

Last Answer : c. parking and acces

Implicit cost refers to ……………… (a) Value of inputs owned by the firm and used in its own manufacturing process (b) Value of input or services purchased from outside and used in its own manufacturing process ; (c) Value of inputs owned by the firm and sold to others ; (d) Value of inputs or services for which no payments were made to outside

Description : Implicit cost refers to (a) Value of inputs owned by the firm and used in its own manufacturing process (b) Value of input or services purchased from outside and used in its own manufacturing ... and sold to others ; (d) Value of inputs or services for which no payments were made to outside 

Last Answer : (d) Value of inputs or services for which no payments were made to outside 

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Which factory manufactures a product and the customer's name is written on the product as a trademark ? There is a saying to use ' own brand ' . Putting the name of the customer instead of putting the name of the company on the product that the manufacturer produces ; Since that is the "trademark".

Description : Which factory manufactures a product and the customer's name is written on the product as a trademark ? There is a saying to use ' own brand ' . Putting the name of the customer instead of putting the ... his own trademark. What is the implication of this process known as the use of "own brand" ?

Last Answer : There is no restriction on any company or factory which manufactures products for the customer to write the name of the customer as "Commercial Brand" or "Trademark" instead of the name of the ... proprietors of these have the right to transact and it is not permissible to infringe upon them.

Which of the jetted bathtubs you carry has the longest manufactures product warranty?

Description : Which of the jetted bathtubs you carry has the longest manufactures product warranty?

Last Answer : Presidential Spas advertises that they have the longest manufacturer's warranty.

Which of the following elements is not included in the scope of market analysis? (A) Competition from other manufactures (B) Product distribution (C) Opportunities (D) Economics

Description : Which of the following elements is not included in the scope of market analysis? (A) Competition from other manufactures (B) Product distribution (C) Opportunities (D) Economics

Last Answer : (D) Economics

Each manufactures must improve his to maintain a profitable position A. Reputation C. Control B. Product D. Customer

Description : Each manufactures must improve his to maintain a profitable position A. Reputation C. Control B. Product D. Customer

Last Answer : Product 

Which of the following departmentalization can be considered necessary in an organization where the Company‟s products fall into several categories with very different production methods for each category? (a) Customer ; (b) Production ; (c) Process ; (d) Matrix

Description : Which of the following departmentalization can be considered necessary in an organization where the Company‟s products fall into several categories with very different production methods for each category? (a) Customer ; (b) Production ; (c) Process ; (d) Matrix

Last Answer :  (c) Process ;

What is the difference between customized products and personalized products?

Description : What is the difference between customized products and personalized products?

Last Answer : Both terms are generally used interchangeably but there are a few differences to consider.Customized productsThese products have plenty of options that can be designed with different texts, sizes, ... a custom product, while an identification card would be recognized as a personalized product.Perso

What is the most safe mode of transit for your fragile products Is it customized folding cartons, corrugated boxes, or mailer boxes Which one is better?

Description : What is the most safe mode of transit for your fragile products Is it customized folding cartons, corrugated boxes, or mailer boxes Which one is better?

Last Answer : Folding carton is, no doubt, one of the most secure packaging available all around the world. But it is only famous for its protection abilities but also due to its ability to attract customers in ... with the desired information. A die-cut window can also be created on it to showcase the product.

Digital products are best suited for B2C e‐commerce because they: a. Are commodity like products b. Can be mass‐customized and personalized c. Can be delivered at the time of purchase d. All of the above

Description : Digital products are best suited for B2C e‐commerce because they: a. Are commodity like products b. Can be mass‐customized and personalized c. Can be delivered at the time of purchase d. All of the above

Last Answer : d. All of the above

Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers (C) States that the work required to form particle of any size from very large feed is proportional to the square root of the volume to surface ratio of the product (D) States that the work required for the crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

L. A. Gear's sports shoe line would have been classified as a problem child when it was introduced. Based on this classification, which of the following would have been true according to the product -portfolio matrix? A)High profitability B)High market growth rate C)High market share D)Positive cash flow E)Relatively high sales volume

Description : L. A. Gear's sports shoe line would have been classified as a problem child when it was introduced. Based on this classification, which of the following would have been true according to the ... B)High market growth rate C)High market share D)Positive cash flow E)Relatively high sales volume

Last Answer : B)High market growth rate

9) American Express implements a programme of calling its current cardholders to find out what, if any, changes they would like to see in the services provided. The firm is exhibiting characteristics associated with which of the following A)production B)sales C)marketing D)social

Description : 9) American Express implements a programme of calling its current cardholders to find out what, if any, changes they would like to see in the services provided. The firm is exhibiting characteristics associated with which of the following A)production B)sales C)marketing D)social

Last Answer : C)marketing

66. The energy used by any manufacturing process varies with a) Production volume b) Type of process c) Resource input d) All the above

Description : 66. The energy used by any manufacturing process varies with a) Production volume b) Type of process c) Resource input d) All the above

Last Answer : All the above

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If there is low formalization, a comprehensive information network and high participation in decisionmaking, one would expect……………. (a) A mechanistic structure ; (b) A typical government organization ; (c) A stable structure (d) An organic structure

Description : If there is low formalization, a comprehensive information network and high participation in decisionmaking, one would expect……………. (a) A mechanistic structure ; (b) A typical government organization ; (c) A stable structure (d) An organic structure

Last Answer : (d) An organic structure 

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

Products that have a relatively low market share and low prospects for growth are considered by the Boston Consulting Group to be A)dogs. B)cash cows. C)stars. D)cash contributors.

Description : Products that have a relatively low market share and low prospects for growth are considered by the Boston Consulting Group to be A)dogs. B)cash cows. C)stars. D)cash contributors.

Last Answer : A)dogs.

Feature of ANN in which ANN creates its own organization or representation of information it receives during learning time is A. Adaptive Learning B. Self Organization C. What-If Analysis D. Supervised Learniing

Description : Feature of ANN in which ANN creates its own organization or representation of information it receives during learning time is A. Adaptive Learning B. Self Organization C. What-If Analysis D. Supervised Learniing

Last Answer : B. Self Organization