_________ is used for heating non -conducting materials.

_______ is used for heating non -conducting materials. 

(1) Eddy current heating (2) Arc heating (3) Induction heating (4) Dielectric heating
by

1 Answer

Answer :

Dielectric heating is used for heating non -conducting materials. 

by

Related questions

State any four properties of conducting materials.

Description : State any four properties of conducting materials.

Last Answer : Electrical properties of conductivity materials: i) Low resistivity. ii) Low temperature coefficient of resistance. iii) High conductivity. iv) Low heat dissipation.  Mechanical properties of ... properties of conductivity materials: i) Adequate resistant to corrosion. ii) Low oxidation. 

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

can induction heating is use for both magnetic and non magnetic material ?

Last Answer : Yes, Induction heating is used for both magnetic and non-magnetic materials.

State advantages of electric heating over other types of heating methods.

Description : State advantages of electric heating over other types of heating methods.

Last Answer : Advantages of Electric heating over the other types of heating methods: 1. It can be put into service immediately. 2. No standby losses. 3. High efficiency. 4. More economical ... low attention and supervision. 14. Protection against overheating can be provided by suitable switch gear. 

Enlist any four advantages of induction heating.

Description : Enlist any four advantages of induction heating. 

Last Answer : Advantages of Induction heating https://youtu.be/RcdH_74VJz0

Magnetic and Non-magnetic Materials

Description : Magnetic and Non-magnetic Materials

Last Answer : We have now looked at a number of ways in which matter can be grouped, such as into metals, semi-metals and non-metals; electrical conductors and insulators, and thermal conductors and insulators. ... information must be stored, in computers and TV's, as well as in generators and electric motors.

Can underfloor heating be installed under the wooden floor ?

Description : Can underfloor heating be installed under the wooden floor ?

Last Answer : Under-floor hydronic or steam heat can certainly be installed underneath wooden floors. I have personally installed one instance of hydronic (hot water) heat system under wooden flooring, and have demolished ... heat, but I have visited such places on many occasions and found them very comfortable.

What is the best cost effective way to use central heating.

Description : What is the best cost effective way to use central heating.

Last Answer : no don’t close the doors. The air needs to recycle itself, so you need proper circulation. close vents in rooms you don’t use and use directional vents pointing down (winter months) in the rooms you do. One last thing, make sure you have a clean filter.

How to Install Baseboard Heating

Description : How to Install Baseboard Heating

Last Answer : How to Install Baseboard Heating If you have a small apartment or room that you want to heat in an efficient manner, one effective method is by using electric baseboard heating. Installing it yourself might seem ... these steps and you're sure to have a cozy and warm indoor area, all the time.

How to Make a Heating Pad ?

Description : How to Make a Heating Pad ?

Last Answer : A heating pad is a very important item to have around in the household. Whether it's a headache, menstrual cramps or other pains, a heating pad would make for a great help. This heating pad is also made ... is that there are a myriad of ways we can use for things that we think are no longer useful.

How to install autonomous heating?

Description : How to install autonomous heating?

Last Answer : Autonomous heating and hot water supply is gaining popularity and is used not only in winter, but also in summer. The reason for this, as a rule, is large bills from utilities, as well as the ... a boiler, you should not save on the reliability of the boiler, on control equipment and on service.

The range of frequencies used in induction heating is :

Description : The range of frequencies used in induction heating is :  (A) 0-25 Hz  (C) less than 200 Hz  (B) 50 to 100 Hz  (D) more than 1 kHz

Last Answer : The range of frequencies used in induction heating is : more than 1 kHz

The frequencies and voltage used in Dielectric heating are

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Last Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

In order that current should flow without causing excessive heating or voltage drop, the relay contacts should?

Last Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State properties of insulating materials.

Description : State properties of insulating materials.

Last Answer : (i) Resistivity should be very high. (ii) It should be water resistant. (iii) It should not contain impurities. (iv) It should not be affected chemically and not corroded easily. (v) Its ... It should be mechanically strong (tensile strength should be more). (vii) It should not be porous.

State any four dielectric materials.

Description : State any four dielectric materials.

Last Answer : Ceramics, distilled water, paper, mica, polyethylene, and glass. Metal oxides

Classify electrical materials.

Description : Classify electrical materials.

Last Answer : Classification of electrical materials: i) Conducting Materials ii) Insulating materials iii) Magnetic materials iv) Semiconducting materials

Explain the mechanical properties of insulating materials.

Description : Explain the mechanical properties of insulating materials.

Last Answer : i) Mechanical strength: Mechanical strength depends on temperature and humidity. a) Temperature: High temperature badly affects the mechanical strength of insulating material. While selecting material ... material should have property of easy moulding and machined into required shape and size.

Classify magnetic materials and explain in brief.

Description : Classify magnetic materials and explain in brief.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { ... the absence of external magnetic field. Following are the ferromagnetic materials: Iron, Cobalt, Nickel.

Magnetostrictive materials can convert ________

Description : Magnetostrictive materials can convert ________ A) Magnetic energy into kinetic energy B) Kinetic energy into magnetic energy C) Both A and B D) None of these

Last Answer : Magnetostrictive materials can convert ________ A) Magnetic energy into kinetic energy B) Kinetic energy into magnetic energy C) Both A and B D) None of these

The ability of materials to become polarized under an applied electric field is called _______

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

Those materials are well suited for making permanent magnets which have _____ retentivity and _______ coercivity.

Description : Those materials are well suited for making permanent magnets which have _____ retentivity and _______ coercivity.

Last Answer : Those materials are well suited for making permanent magnets which have high retentivity and high coercivity.

Those magnetic materials are best suited for making armature and transformer cores which have...

Description : Those magnetic materials are best suited for making armature and transformer cores which have____permeability and_______hystersis loss.

Last Answer : Those magnetic materials are best suited for making armature and transformer cores which have high permeability and low hystersis loss.

Can you help me with a list of clothing materials? (Details inside!)

Description : Can you help me with a list of clothing materials? (Details inside!)

Last Answer : answer:Cotton, wool, linen, silk, rayon, polyester, nylon, hemp, microfiber, leather, recycled plastic bottles. Velvet is cotton, nylon or silk with a short pile. Lace is cotton or silk thread that has been arranged in a pattern.

What materials are interior doors made of?

Description : What materials are interior doors made of?

Last Answer : What materials are interior doors made of? The door leaf material is a key component that influences the quality and cost of the door. Interior doors made of walnut or oak look great and ... relevant for office doors, but they are also installed in residential premises if necessary to reduce costs.

List any four materials used for pattern making

Description : List any four materials used for pattern making

Last Answer : The various types of materials used are as follows: 1. Wood 2. Metal. 3. Plastic. 4. Plaster. 5. Wax.

The electric breakdown strength of insulating materials depends on

Description : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Last Answer : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

The bridge most suited for accurate measurement of relative permittivity of dielectric materials is

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

Insulating materials have the function of?

Description : Insulating materials have the function of?

Last Answer : Insulating materials have the function of preventing an open circuit between the voltage source and the load.

Any recommendations for wood stoves?

Description : Any recommendations for wood stoves?

Last Answer : We had a fireplace insert decades ago. It put out heat, of course, but in no way compared to our free standing, cast iron fireplace which could heat up a small city . It looked cool to me; that’s a matter of taste of whether you like a rustic look. For safety, we never gave it a second thought.

What type of furnace do I need?

Description : What type of furnace do I need?

Last Answer : What is your current heat source for the baseboard heaters? For example, are they electric baseboard heaters or hot water/steam baseboard heaters?

Can you recommend a good space heater?

Description : Can you recommend a good space heater?

Last Answer : I suggest a ceramic heater because it is cool to the touch and puts out a lot of heat. I have a small one that heats up my entire family room in the basement.

What material is this 30 year old blanket made from?

Description : What material is this 30 year old blanket made from?

Last Answer : It looks like mohair to me.

What exactly is the material inside a gel mousepad?

Description : What exactly is the material inside a gel mousepad?

Last Answer : Not too sure on the specifics you’ve asked for. The gel used however is normally silicon. The stuff they used to put in breast implants. Go-on give it a squeeze!

The material which on heating in presence of oxygen catches fire easily and produces heat and light energy is known as _________ material. a) combustible b)non-combustible c)conducting d)none

Description : The material which on heating in presence of oxygen catches fire easily and produces heat and light energy is known as _________ material. a) combustible b)non-combustible c)conducting d)none

Last Answer : a) combustible

The method suitable for heating of a conducting medium is

Description : The method suitable for heating of a conducting medium is   (a) Induction heating (b) Indirect arc heating (c) Eddy current heating (d) Resistance heating

Last Answer : Induction heating is used for heating of a conducting medium

When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Description : When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Last Answer : a) chemical effect of current

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

The resistance of most conducting materials will change as a result of temperature change. The resistance of copper will _____________. A. increase as temperature decreases B. decrease as temperature decreases C. remain the same between 20°F and 110°F D. remain the same between 68°F and 230°F

Description : The resistance of most conducting materials will change as a result of temperature change. The resistance of copper will _____________. A. increase as temperature decreases B. decrease as temperature decreases C. remain the same between 20°F and 110°F D. remain the same between 68°F and 230°F

Last Answer : Answer: B

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

_________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Description : _________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Last Answer : (B) Gauges or precision parts

A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the straighrt sections of the loop is of the

Description : A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the straighrt sections of the loop is of the

Last Answer : A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the ... `(1)/(sqrt(2))(hat(i)+hat(k))`

Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.

Why should operating-room personnel wear conducting shoes instead of non-conducting?

Description : Why should operating-room personnel wear conducting shoes instead of non-conducting?

Last Answer : Need answer

Heartwood differs from sapwood in (a) presence of rays and fibres (b) absence of vessels and parenchyma (c) having dead and non-conducting elements (d) being susceptible to pests and pathogens.

Description : Heartwood differs from sapwood in (a) presence of rays and fibres (b) absence of vessels and parenchyma (c) having dead and non-conducting elements (d) being susceptible to pests and pathogens.

Last Answer : (c) having dead and non-conducting elements

HCl is dissolved in solvent A; the solution is non-conducting towards an electric current. Solvent A must be: w) polar x) non-polar y) organic z) more acidic than HCl

Description : HCl is dissolved in solvent A; the solution is non-conducting towards an electric current. Solvent A must be: w) polar x) non-polar y) organic z) more acidic than HCl

Last Answer : ANSWER: X -- NON-POLAR