The method suitable for heating of a conducting medium is

The method suitable for heating of a conducting medium is 

 (a) Induction heating (b) Indirect arc heating (c) Eddy current heating (d) Resistance heating
by

1 Answer

Answer :

Induction heating is used for heating of a conducting medium
by

Related questions

_________ is used for heating non -conducting materials.

Description : _______ is used for heating non -conducting materials.  (1) Eddy current heating (2) Arc heating (3) Induction heating (4) Dielectric heating

Last Answer : Dielectric heating is used for heating non -conducting materials. 

When the wave travels in a conducting medium, the rate of attenuation is decided by

Description : When the wave travels in a conducting medium, the rate of attenuation is decided by

Last Answer : When the wave travels in a conducting medium, the rate of attenuation is decided by Both attenuation constant and phase constant

State what is the significance of conducting phasing out test on a 3-phase transformer? Explain its procedure with a suitable connection diagram.

Description : State what is the significance of conducting phasing out test on a 3-phase transformer? Explain its procedure with a suitable connection diagram.

Last Answer : -Short primary & secondary winding of other phases expect the one under test. -Connect voltmeter to secondary winding. -A small DC current is circulated through the primary winding through ... . -The test repeated for finding out remaining concerned secondary windings in the same manner.

When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Description : When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Last Answer : a) chemical effect of current

The material which on heating in presence of oxygen catches fire easily and produces heat and light energy is known as _________ material. a) combustible b)non-combustible c)conducting d)none

Description : The material which on heating in presence of oxygen catches fire easily and produces heat and light energy is known as _________ material. a) combustible b)non-combustible c)conducting d)none

Last Answer : a) combustible

What are electrons flowing through a conducting medium is called?

Description : What are electrons flowing through a conducting medium is called?

Last Answer : current

What are electrons flowing through a conducting medium is called?

Description : What are electrons flowing through a conducting medium is called?

Last Answer : current

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

Electromagneticwaves are refractedwhen they a. pass into a medium of different dielectric constant b. are polarized at right angles to the direction of propagation c. encounter a perfectly conducting plane d. pass through a small slot in a conducting plane

Description : Electromagneticwaves are refractedwhen they a. pass into a medium of different dielectric constant b. are polarized at right angles to the direction of propagation c. encounter a perfectly conducting plane d. pass through a small slot in a conducting plane

Last Answer : a. pass into a medium of different dielectric constant

What Eratosthenes determine the circumference of Earth by conducting an experiment put his steps in order as they correlate to the scientific method?

Description : What Eratosthenes determine the circumference of Earth by conducting an experiment put his steps in order as they correlate to the scientific method?

Last Answer : Need answer

The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Description : The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Last Answer : (3) with the speed of light Explanation: Heat is a form of energy. An important property of heat is that it flows from a body at higher temperature to another body at lower temperature.

Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Last Answer : (B) Mercury

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Gas based fertiliser plants use (A) Natural gas as a source of hydrogen (B) Natural gas as heating medium (C) Coal gas as a source of hydrogen (D) Coal gas as heating medium

Description : Gas based fertiliser plants use (A) Natural gas as a source of hydrogen (B) Natural gas as heating medium (C) Coal gas as a source of hydrogen (D) Coal gas as heating medium

Last Answer : (A) Natural gas as a source of hydrogen

Dowtherm is a (A) High temperature heating medium (a petroleum product) (B) Product of coal tar distillation (C) Very heat sensitive material (D) None of these

Description : Dowtherm is a (A) High temperature heating medium (a petroleum product) (B) Product of coal tar distillation (C) Very heat sensitive material (D) None of these

Last Answer : Option A

The characteristic invalid for heat radiation is that it travels : (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Description : The characteristic invalid for heat radiation is that it travels : (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Last Answer : with the speed of light

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

State any four properties of conducting materials.

Description : State any four properties of conducting materials.

Last Answer : Electrical properties of conductivity materials: i) Low resistivity. ii) Low temperature coefficient of resistance. iii) High conductivity. iv) Low heat dissipation.  Mechanical properties of ... properties of conductivity materials: i) Adequate resistant to corrosion. ii) Low oxidation. 

The electric field inside a hollow conducting sphere ________

Description : The electric field inside a hollow conducting sphere ________ A) Depends on the diameter of the sphere  B) Varies according to the direction of earth’s magnetic poles C) Is zero  D) None of these

Last Answer : The electric field inside a hollow conducting sphere Is zero

Once SCR starts conducting a forward current, its gate losses control over

Description : Once SCR starts conducting a forward current, its gate losses control over (A) Anode circuit voltage only (B) Anode circuit current only (C) Anode circuit voltage and current (D) None of the above

Last Answer : Anode circuit voltage and current 

While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method.

Description : While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method. 

Last Answer : (i) Assumptions are made in case of Nominal 'T' Method:  a. It is assume that line capacitance is connected at center of transmission line. b. It is assume that half ... assumed that transmission line resistance & reactance per phase is connected in between two half transmission line capacitance 

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

Explain V- I method of measurement of medium resistance.

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

The suitable medium to establish commonness between sender and receiver of message

Description : The suitable medium to establish commonness between sender and receiver of message

Last Answer : Ans. Communication

Young embryo is removed from developing seeds and planted on a suitable nutrient medium in vitro is called as

Description : Young embryo is removed from developing seeds and planted on a suitable nutrient medium in vitro is called as

Last Answer : Ans. Embryo culture

Identify the non suitable medium for 802.3 ethernet?a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Last Answer : c. A microwave link

A runoff river plant (A) Is a medium head scheme (B) Generates power during peak hours only (C) Is suitable only on a perennial river (D) Has no pondage at all

Description : A runoff river plant (A) Is a medium head scheme (B) Generates power during peak hours only (C) Is suitable only on a perennial river (D) Has no pondage at all

Last Answer : Answer: Option C

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

The system is suitable to recover heat from ........ temperature exhaust gases . a) Medium-low b) Medium-high c) High-low d) High

Description : The system is suitable to recover heat from ........ temperature exhaust gases . a) Medium-low b) Medium-high c) High-low d) High

Last Answer : Medium-high

Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate

Description : Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate

Last Answer : Heat wheels

In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator

Description : In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator

Last Answer : Heat wheels

The most suitable motor oil for use in a car in cold weather is: w) a high viscosity oil x) a low viscosity oil y) a medium viscosity oil

Description : The most suitable motor oil for use in a car in cold weather is: w) a high viscosity oil x) a low viscosity oil y) a medium viscosity oil  

Last Answer : ANSWER: X -- A LOW VISCOSITY OIL

What is the name of the method of heating water in stove fire ?

Description : What is the name of the method of heating water in stove fire ?

Last Answer : Introduction to the method of heating water in the fire of the stove.

The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Description : The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer : (1) hammering a magnet Explanation: Hammering a rod will either allow it to become slightly magnetic inlaid along a magnetic field (i.e.North - South) or demagnetize it if laid across the field lines (i.e. East-West). A current passing through a coil will produce a magnetic field.

Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Last Answer : Vapor phase oxidation.

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

Who discovered the method of destroying disease-producing bacteria in **** and milk by heating the liquid properly?

Description : Who discovered the method of destroying disease-producing bacteria in beer and milk by heating the liquid properly?

Last Answer : ANSWER: (LOUIS) PASTEUR

The method of magnetisation is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Description : The method of magnetisation is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer :  hammering a magnet

In the heating process of ______ type a simple method of temperature control is possible by means of a ...

Description : In the heating process of ______ type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : In the heating process of high frequency eddy current type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. 

Would China not be justified in conducting a clandestine military operation to retrieve its unjustly detained Huawei CFO?

Description : Would China not be justified in conducting a clandestine military operation to retrieve its unjustly detained Huawei CFO?

Last Answer : Prevention is better than cure. I don't think she's unjustly detained in the first place. She'll probably lose her position or be clarified as innocent, either way the case will be over. All for ... Security, surely she and China should find it acceptable, it's not like they have a choice anyway.

I am away from the office and conducting a bit of business by email with my staff. Why...I don't know why, but I just noticed that the first 3 letters of assistant is 'ass"!? Is this merely a coincidence?

Description : I am away from the office and conducting a bit of business by email with my staff. Why...I don't know why, but I just noticed that the first 3 letters of assistant is 'ass"!? Is this merely a coincidence?

Last Answer : You need another cup of coffee.

Anyone willing to participate in a research study I'm conducting?

Description : Anyone willing to participate in a research study I'm conducting?

Last Answer : I’m afraid I could not be a useful test subject for you. I suffer from tinnitis, which means I am bothered every moment of my life with unpleasant sounds; buzzing, chirping, tones. Sorry.

Would it be inappropriate to mention to the person conducting my road test that I have been working through an extreme phobia of driving?

Description : Would it be inappropriate to mention to the person conducting my road test that I have been working through an extreme phobia of driving?

Last Answer : answer:It's not that it would be inappropriate , it just wouldn't (and shouldn't) matter. Driving examiners are used to first-time drivers being nervous about passing. That's part of what they deal ... is a very patient and good driver - and have that person play the part of the examiner with you.

(a) “The breathing cycle is rhythmic whereas exchange of gases is a continuous process”. Justify this statement. (b) What happens if conducting tubes of circulatory system develops a leak? State in brief, how could this be avoided? (c) How opening and closing of stomata takes place? -Biology

Description : (a) “The breathing cycle is rhythmic whereas exchange of gases is a continuous process”. Justify this statement. (b) What happens if conducting tubes of circulatory system develops a leak? State in brief, how could this be avoided? (c) How opening and closing of stomata takes place? -Biology

Last Answer : (a) The breathing cycle involves inhalation and exhalation of air due to alternate expansion and contraction of thoracic cavity. Thus it is a rhythmic process. But exchange of gases is a continuous process ... pore opens up. When water moves out the guard cells shrinks and the stomatal pore closes.

Difference between conducting zone and respiratory zone. -Biology

Description : Difference between conducting zone and respiratory zone. -Biology

Last Answer : answer:

Name the two types of conducting tissues. -Biology

Description : Name the two types of conducting tissues. -Biology

Last Answer : answer:

Functions of conducting tissues? -Biology

Description : Functions of conducting tissues? -Biology

Last Answer : answer: