The Kick Off phase of a formal review includes the following :- a) Explaining the objective b) Fixing defects found typically done by author c) Follow up d) Individual Meeting preparations

The Kick Off phase of a formal review includes the following :-
a) Explaining the objective
b) Fixing defects found typically done by author
c) Follow up
d) Individual Meeting preparations
by

1 Answer

Answer :

a) Explaining the objective
by

Related questions

Success Factors for a review include: i. Each Review does not have a predefined objective ii. Defects found are welcomed and expressed objectively iii. Management supports a good review process. iv. There is an emphasis on learning and process improvement. a) ii,iii,iv are correct and i is incorrect b) iii , i , iv is correct and ii is incorrect c) i , iii , iv , ii is in correct d) ii is correct

Description : Success Factors for a review include: i. Each Review does not have a predefined objective ii. Defects found are welcomed and expressed objectively iii. Management supports a good review process. iv. There is an emphasis on ... and ii is incorrect c) i , iii , iv , ii is in correct d) ii is correct

Last Answer : a) ii,iii,iv are correct and i is incorrect

‘Be bugging’ is known as A. Preventing the defects by inspection B. Fixing the defects by debugging C. Adding known defects by seeding D. A process of fixing the defects by tester

Description : ‘Be bugging’ is known as A. Preventing the defects by inspection B. Fixing the defects by debugging C. Adding known defects by seeding D. A process of fixing the defects by tester

Last Answer : C. Adding known defects by seeding

System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior to starting of the system testing III. All components are under formal, automated configuration and release management control A. I and II only B. II and III only C. I and III only D. I, II and III

Description : System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior ... . I and II only B. II and III only C. I and III only D. I, II and III

Last Answer : D. I, II and III

The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Description : The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Last Answer : D. All of the above

‘Defect Density’ calculated in terms of A. The number of defects identified in a component or system divided by the size of the component or the system B. The number of defects found by a test phase divided by the number found by that test phase and any other means after wards C. The number of defects identified in the component or system divided by the number of defects found by a test phase D. The number of defects found by a test phase divided by the number found by the size of the system

Description : Defect Density' calculated in terms of A. The number of defects identified in a component or system divided by the size of the component or the system B. The number of defects found by a test phase ... The number of defects found by a test phase divided by the number found by the size of the system

Last Answer : A. The number of defects identified in a component or system divided by the size of the component or the system

Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, defects found and fixed iv. The size of the testing Team and skills of the engineers a) iv is correct and i,ii,iii are incorrect b) i,ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Description : Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, ... ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Last Answer : b) i,ii,iii are correct and iv is incorrect

Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique combinations of conditions and associated results in order to derive unique test cases for validation testing. C. Tools for documenting defects as they are found during testing and for tracking their status through to resolution. D. The most traditional means for analyzing a system or a program

Description : Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique ... their status through to resolution. D. The most traditional means for analyzing a system or a program

Last Answer : A. A metric used to show the logic covered during a test session providing insight to the extent of testing.

Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or lack of test coverage in certain areas iv. Verifying the Test Environment. a) iv is correct and i,ii,iii are incorrect. b) i,ii,iii is correct and iv is incorrect c) ii is correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect

Description : Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or ... correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect

Last Answer : b) i,ii,iii is correct and iv is incorrect

Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the program is defect free. c) The purpose of testing is to demonstrate that the program does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Description : Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the ... does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Last Answer : d) Testing is executing Software for the purpose of finding defects.

Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Description : Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Last Answer : b) Independent testers see other and different defects and are unbiased.

Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b) iii ,is correct I,ii,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Description : Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b ... ,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Last Answer : a) i , ii,iii,iv is correct

Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or unrelated software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Description : Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or ... software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Last Answer : c) Regression Testing

In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is intended C. Understand the risks and benefits of the development methodology that is to be used in correcting the software system D. Know new enhancement and basic understanding of how the application is implemented in users organization

Description : In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is ... D. Know new enhancement and basic understanding of how the application is implemented in users organization

Last Answer : Understand the risks and benefits of the development methodology that is to be used in correcting the software system

The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Description : The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Last Answer : A. Demonstrate that the application works properly

Defects are least costly to correct at what stage of the development cycle? A. Requirements B. Analysis & Design C. Construction D. Implementation

Description : Defects are least costly to correct at what stage of the development cycle? A. Requirements B. Analysis & Design C. Construction D. Implementation

Last Answer : A. Requirements

UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Description : UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Last Answer : A. Data

Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV

Description : Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV

Last Answer : C.I, III &IV

The primary objective of formal technical reviews is to find _________ during the process so that they do not become defects after release of the software. a) errors b) equivalent faults c) failure cause d) none of the mentioned

Description : The primary objective of formal technical reviews is to find _________ during the process so that they do not become defects after release of the software. a) errors b) equivalent faults c) failure cause d) none of the mentioned

Last Answer :  Ans: a

a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each requirement is both testable and uniquely identifiable C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Description : a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each ... business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Last Answer : C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable

As a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each requirement is both testable and uniquely identifiable C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Description : As a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each ... business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Last Answer : B. Test objective

The following defines the statement of what the tester is expected to accomplish or validate during testing activity A. Test scope B. Test objective C. Test environment D. None of the above

Description : The following defines the statement of what the tester is expected to accomplish or validate during testing activity A. Test scope B. Test objective C. Test environment D. None of the above

Last Answer : B. Test objective

In data flow testing, objective is to find A. All dc-paths that are not du-paths B. V All du-paths C. All du-paths that are not dc-paths D. All dc-paths

Description : In data flow testing, objective is to find A. All dc-paths that are not du-paths B. V All du-paths C. All du-paths that are not dc-paths D. All dc-paths

Last Answer : C. All du-paths that are not dc-paths

Item transmittal report is also known as A. Incident report B. Release note C. Review report D. Audit report

Description : Item transmittal report is also known as A. Incident report B. Release note C. Review report D. Audit report

Last Answer : B. Release note

Verification performed without any executable code is referred to as A. Review B. Static testing C. Validation D. Sanity testing

Description : Verification performed without any executable code is referred to as A. Review B. Static testing C. Validation D. Sanity testing

Last Answer : B. Static testing

Test data planning essentially includes A. Network B. Operational Model C. Boundary value analysis D. Test Procedure Planning

Description : Test data planning essentially includes A. Network B. Operational Model C. Boundary value analysis D. Test Procedure Planning

Last Answer : C. Boundary value analysis

Path coverage includes A. Statement coverage B. Condition coverage C. Decision coverage D. None of the above

Description : Path coverage includes A. Statement coverage B. Condition coverage C. Decision coverage D. None of the above

Last Answer : C. Decision coverage

Which of the following is not phase of the Fundamental Test Process? a) Test Planning and Control b) Test implementation and Execution c) Requirement Analysis d) Evaluating Exit criteria and reporting

Description : Which of the following is not phase of the Fundamental Test Process? a) Test Planning and Control b) Test implementation and Execution c) Requirement Analysis d) Evaluating Exit criteria and reporting

Last Answer : c) Requirement Analysis

Evaluating testability of the requirements and system are a part of which phase:- a) Test Analysis and Design b) Test Planning and control c) Test Implementation and execution d) Evaluating exit criteria and reporting Q4. One of the fields on a form contains a text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value.

Description : Evaluating testability of the requirements and system are a part of which phase:- a) Test Analysis and Design b) Test Planning and control c) Test Implementation and execution d) Evaluating ... text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value.

Last Answer : a) Test Analysis and Design

“This life cycle model is basically driven by schedule and budget risks” This statement is best suited for A. Water fall model B. Spiral model C. Incremental model D. V-Model Q33. The bug tracking system will need to capture these phases for each bug. I. Phase injected II. Phase detected III. Phase fixed IV. Phase removed

Description : This life cycle model is basically driven by schedule and budget risks This statement is best suited for A. Water fall model B. Spiral model C. Incremental model D. V-Model Q33. The bug tracking ... these phases for each bug. I. Phase injected II. Phase detected III. Phase fixed IV. Phase removed

Last Answer : B. I, II and IV

A test harness is a A. A high level document describing the principles, approach and major objectives of the organization regarding testing B. A distance set of test activities collected into a manageable phase of a project C. A test environment comprised of stubs and drives needed to conduct a test D. A set of several test cases for a component or system under test

Description : A test harness is a A. A high level document describing the principles, approach and major objectives of the organization regarding testing B. A distance set of test activities collected into a manageable phase ... conduct a test D. A set of several test cases for a component or system under test

Last Answer : C. A test environment comprised of stubs and drives needed to conduct a test

A project manager has been transferred to a major software development project that is in the implementation phase. The highest priority for this project

Description : A project manager has been transferred to a major software development project that is in the implementation phase. The highest priority for this projectmanager should be to A. Establish a relationship with ... the manager' s management style D. Ensure that the project proceeds at its current pace

Last Answer : B. Learn the project objectives and the existing project plan

Which of the following is not decided in the test-planning phase? A. Schedules and deliverables B. Hardware and software C. Entry and exit criteria D. Types of test cases

Description : Which of the following is not decided in the test-planning phase? A. Schedules and deliverables B. Hardware and software C. Entry and exit criteria D. Types of test cases

Last Answer : D. Types of test cases

Deliverables of test design phase include all the following except A. Test data B. Test data plan C. Test summary report D. Test procedure plan

Description : Deliverables of test design phase include all the following except A. Test data B. Test data plan C. Test summary report D. Test procedure plan

Last Answer : C. Test summary report

The content of the final report typically includes the following topics __________. A. Executive summary B. review and analysis C. recommendations D. If all the above are correct.

Description : The content of the final report typically includes the following topics __________. A. Executive summary B. review and analysis C. recommendations D. If all the above are correct.

Last Answer : D. If all the above are correct.

Impact Analysis helps to decide :- a) How much regression testing should be done. b) Exit Criteria c) How many more test cases need to written. d) Different Tools to perform Regression Testing

Description : Impact Analysis helps to decide :- a) How much regression testing should be done. b) Exit Criteria c) How many more test cases need to written. d) Different Tools to perform Regression Testing

Last Answer : a) How much regression testing should be done.

“The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Description : “The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Last Answer : A. Horizontal tracebility

All of the following might be done during unit testing except A. Desk checkB. Manual support testing C. Walkthrough D. Compiler based testing

Description : All of the following might be done during unit testing except A. Desk checkB. Manual support testing C. Walkthrough D. Compiler based testing

Last Answer : B. Manual support testing

Ahmed is actively initiating a project, so he plans to invite all relevant internal and external stakeholders including sponsors, customers, project teams, etc. for a kick-off meeting. To ensure all of them are covered in the stakeholder register, which document is the most helpful for Ahmed to look at? Select one: a. Project team activities b. Scope statement c. Project charter d. Work packages e. Project funding agents

Description : Ahmed is actively initiating a project, so he plans to invite all relevant  internal and external stakeholders including sponsors, customers, project  teams, etc. for a kick-off meeting. To ensure all ... b. Scope statement c. Project charter d. Work packages e. Project funding agents

Last Answer : c. Project charter

. Consider the above state transition diagram of a switch.Which of the following represents an invalid state transition? a) OFF to ON b) ON to OFF c) FAULT to ON Q15. Peer Reviews are also called as :- a) Inspection b) Walkthrough

Description : . Consider the above state transition diagram of a switch.Which of the following represents an invalid state transition? a) OFF to ON b) ON to OFF c) FAULT to ON Q15. Peer Reviews are also called as :- a) Inspection b) Walkthrough

Last Answer : c) FAULT to ON

COTS is known as A. Commercial off the shelf sA. Sanity testing B. System testing C. Smoke testing D. Regression testing

Description : COTS is known as A. Commercial off the shelf sA. Sanity testing B. System testing C. Smoke testing D. Regression testing

Last Answer : C. Smoke testing

COTS is known as A. Commercial off the shelf software B. Compliance of the software C. Change control of the software D. Capable off the shelf software

Description : COTS is known as A. Commercial off the shelf software B. Compliance of the software C. Change control of the software D. Capable off the shelf software

Last Answer : A. Commercial off the shelf software

f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence partitions? A. 15, 19 and 25 degrees B. 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Description : f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence ... 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Last Answer : A. 15, 19 and 25 degrees

A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to cover all equivalence partitions? A. 15,19 and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Description : A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to ... and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Last Answer : A. 15,19 and 25.

What is COTS? A. Commercial On-the-shelf software B. Commercial off-the-shelf software C. Common Offshore testing Software

Description : What is COTS? A. Commercial On-the-shelf software B. Commercial off-the-shelf software C. Common Offshore testing Software

Last Answer : B. Commercial off-the-shelf software

Which of the following is not a type of incremental testing approach? a) Top down b) Big-bang c) Bottom up d) Functional incrementation.

Description : Which of the following is not a type of incremental testing approach? a) Top down b) Big-bang c) Bottom up d) Functional incrementation.

Last Answer : b) Big-bang

. One of the more daunting challenges of managing a test project is that so many dependencies converge at test execution. One missing configuration file or hard ware device can render all your test results meaning less. You can end up with an entire platoon of testers sitting around for days. Who is responsible for this incident? A. Test managers faults only B. Test lead faults only C. Test manager and proj

Description : . One of the more daunting challenges of managing a test project is that so many dependencies converge at test execution. One missing configuration file or hard ware device can render all your test results ... incident? A. Test managers faults only B. Test lead faults only C. Test manager and proj

Last Answer : A. Test managers faults only

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

Find the invalid equivalence class for the following test case Draw a line up to the length of 4 inches A. Line with 1 dot-width B. Curve C. Line with 4 inches D. None of the above

Description : Find the invalid equivalence class for the following test case Draw a line up to the length of 4 inches A. Line with 1 dot-width B. Curve C. Line with 4 inches D. None of the above

Last Answer : B. Curve

Range of accelerating factor is a) 50 to 100 b) 1.3 to 1.7 c) 1 to 10 d) 10.8 to 11.2

Description : Range of accelerating factor is a) 50 to 100 b) 1.3 to 1.7 c) 1 to 10 d) 10.8 to 11.2

Last Answer : b) 1.3 to 1.7