Success Factors for a review include: i. Each Review does not have a predefined objective ii. Defects found are welcomed and expressed objectively iii. Management supports a good review process. iv. There is an emphasis on learning and process improvement. a) ii,iii,iv are correct and i is incorrect b) iii , i , iv is correct and ii is incorrect c) i , iii , iv , ii is in correct d) ii is correct

Success Factors for a review include:
i. Each Review does not have a predefined objective
ii. Defects found are welcomed and expressed objectively
iii. Management supports a good review process.
iv. There is an emphasis on learning and process improvement.
a) ii,iii,iv are correct and i is incorrect
b) iii , i , iv is correct and ii is incorrect
c) i , iii , iv , ii is in correct
d) ii is correct
by

1 Answer

Answer :

a) ii,iii,iv are correct and i is incorrect
by

Related questions

Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b) iii ,is correct I,ii,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Description : Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b ... ,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Last Answer : a) i , ii,iii,iv is correct

Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, defects found and fixed iv. The size of the testing Team and skills of the engineers a) iv is correct and i,ii,iii are incorrect b) i,ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Description : Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, ... ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect

Last Answer : b) i,ii,iii are correct and iv is incorrect

Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or lack of test coverage in certain areas iv. Verifying the Test Environment. a) iv is correct and i,ii,iii are incorrect. b) i,ii,iii is correct and iv is incorrect c) ii is correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect

Description : Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or ... correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect

Last Answer : b) i,ii,iii is correct and iv is incorrect

The Kick Off phase of a formal review includes the following :- a) Explaining the objective b) Fixing defects found typically done by author c) Follow up d) Individual Meeting preparations

Description : The Kick Off phase of a formal review includes the following :- a) Explaining the objective b) Fixing defects found typically done by author c) Follow up d) Individual Meeting preparations

Last Answer : a) Explaining the objective

Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester or developer IV. Dependencies of the change request.

Description : Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester or developer IV. Dependencies of the change request.

Last Answer : A. Improve super vision, More reviews of artifacts or program means stage containment of the defects.

Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester or developer IV. Dependencies of the change request. A. I, III and IV B. I, II and III C. II, III and IV D. I, II and IV

Description : Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester ... and IV B. I, II and III C. II, III and IV D. I, II and IV

Last Answer : D. I, II and IV

Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the information gathered during testing iii. Decide what should be automated , to what degree and how. iv. Create the Test Specifications a) i, ii, iii is true and iv is false b) ii,iii,iv is true and i is false c) i is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect

Description : Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the ... is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect

Last Answer : a) i, ii, iii is true and iv is false

Which of the following statements is true about a software verification and validation program? I. It strives to ensure that quality is built into software. II. It provides management with insights into the state of a software project. III. It ensures that alpha, beta, and system tests are performed. IV. It is executed in parallel with software development activities. A. I, II&III B.II, III&IV C.I, II&IV D.I, III&IV

Description : Which of the following statements is true about a software verification and validation program? I. It strives to ensure that quality is built into software. II. It provides management with insights into the state ... software development activities. A. I, II&III B.II, III&IV C.I, II&IV D.I, III&IV

Last Answer : C.I, II&IV

“This life cycle model is basically driven by schedule and budget risks” This statement is best suited for A. Water fall model B. Spiral model C. Incremental model D. V-Model Q33. The bug tracking system will need to capture these phases for each bug. I. Phase injected II. Phase detected III. Phase fixed IV. Phase removed

Description : This life cycle model is basically driven by schedule and budget risks This statement is best suited for A. Water fall model B. Spiral model C. Incremental model D. V-Model Q33. The bug tracking ... these phases for each bug. I. Phase injected II. Phase detected III. Phase fixed IV. Phase removed

Last Answer : B. I, II and IV

‘Defect Density’ calculated in terms of A. The number of defects identified in a component or system divided by the size of the component or the system B. The number of defects found by a test phase divided by the number found by that test phase and any other means after wards C. The number of defects identified in the component or system divided by the number of defects found by a test phase D. The number of defects found by a test phase divided by the number found by the size of the system

Description : Defect Density' calculated in terms of A. The number of defects identified in a component or system divided by the size of the component or the system B. The number of defects found by a test phase ... The number of defects found by a test phase divided by the number found by the size of the system

Last Answer : A. The number of defects identified in a component or system divided by the size of the component or the system

Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique combinations of conditions and associated results in order to derive unique test cases for validation testing. C. Tools for documenting defects as they are found during testing and for tracking their status through to resolution. D. The most traditional means for analyzing a system or a program

Description : Coverage based analysis is best described as: A. A metric used to show the logic covered during a test session providing insight to the extent of testing. B. A tool for documenting the unique ... their status through to resolution. D. The most traditional means for analyzing a system or a program

Last Answer : A. A metric used to show the logic covered during a test session providing insight to the extent of testing.

‘Be bugging’ is known as A. Preventing the defects by inspection B. Fixing the defects by debugging C. Adding known defects by seeding D. A process of fixing the defects by tester

Description : ‘Be bugging’ is known as A. Preventing the defects by inspection B. Fixing the defects by debugging C. Adding known defects by seeding D. A process of fixing the defects by tester

Last Answer : C. Adding known defects by seeding

Defects are least costly to correct at what stage of the development cycle? A. Requirements B. Analysis & Design C. Construction D. Implementation

Description : Defects are least costly to correct at what stage of the development cycle? A. Requirements B. Analysis & Design C. Construction D. Implementation

Last Answer : A. Requirements

Which of the following is a part of Test Closure Activities? i. Checking which planned deliverables have been delivered ii. Defect report analysis. iii. Finalizing and archiving testware. iv. Analyzing lessons. a) i , ii , iv are true and iii is false b) i , ii , iii are true and iv is false c) i , iii , iv are true and ii is false d) All of above are true

Description : Which of the following is a part of Test Closure Activities? i. Checking which planned deliverables have been delivered ii. Defect report analysis. iii. Finalizing and archiving testware. iv. Analyzing lessons. a) i , ii , ... false c) i , iii , iv are true and ii is false d) All of above are true

Last Answer : c) i , iii , iv are true and ii is false

Regression testing should be performed: i. every week ii. after the software has changed iii. as often as possible iv. when the environment has changed v. when the project manager says a) i & ii are true, iii, iv & v are false b) ii, iii & iv are true, i & v are false c) ii & iv are true, i, iii & v are false d) ii is true, i, iii, iv & v are false

Description : Regression testing should be performed: i. every week ii. after the software has changed iii. as often as possible iv. when the environment has changed v. when the project manager says a) i & ii are true, iii, iv & v are ... iv are true, i, iii & v are false d) ii is true, i, iii, iv & v are false

Last Answer : c) ii & iv are true, i, iii & v are false

Match every stage of the software Development Life cycle with the Testing Life cycle: i. Hi-level design a Unit tests ii. Code b Acceptance tests iii. Low-level design c System tests iv. Business requirements d Integration tests a) i-d , ii-a , iii-c , iv-b b) i-c , ii-d , iii-a , iv-b c) i-b , ii-a , iii-d , iv-c d) i-c , ii-a , iii-d , iv-b

Description : Match every stage of the software Development Life cycle with the Testing Life cycle: i. Hi-level design a Unit tests ii. Code b Acceptance tests iii. Low-level design c System tests iv. Business requirements d Integration tests a) i-d , ii ... i-b , ii-a , iii-d , iv-c d) i-c , ii-a , iii-d , iv-b

Last Answer : d) i-c , ii-a , iii-d , iv-b

Consider the following statements: i. 100% statement coverage guarantees 100% branch coverage. ii. 100% branch coverage guarantees 100% statement coverage. iii. 100% branch coverage guarantees 100% decision coverage. iv. 100% decision coverage guarantees 100% branch coverage. v. 100% statement coverage guarantees 100% decision coverage. a) ii is True; i, iii, iv & v are False b) i & v are True; ii, iii & iv are False c) ii & iii are True; i, iv & v are False d) ii, iii & iv are True; i & v are False

Description : Consider the following statements: i. 100% statement coverage guarantees 100% branch coverage. ii. 100% branch coverage guarantees 100% statement coverage. iii. 100% branch coverage guarantees 100% decision coverage. iv. 100% decision ... & v are False d) ii, iii & iv are True; i & v are False

Last Answer : d) ii, iii & iv are True; i & v are False

Validation involves which of the following: i. Helps to check the Quality of the Built Product ii. Helps to check that we have built the right product. iii. Helps in developing the product iv. Monitoring tool wastage and obsoleteness. a) Options i, ii, iii, iv are true. b) ii is true and i, iii, iv are false c) i, ii, iii are true and iv is false d) iii is true and i, ii, iv are false

Description : Validation involves which of the following: i. Helps to check the Quality of the Built Product ii. Helps to check that we have built the right product. iii. Helps in developing the product iv. Monitoring tool wastage and ... , ii, iii are true and iv is false d) iii is true and i, ii, iv are false

Last Answer : b) ii is true and i, iii, iv are false

Deciding how much testing is enough should take into account:- i. Level of Risk including Technical and Business product and project risk ii. Project constraints such as time and budget iii. Size of Testing Team iv. Size of the Development Team a) i, ii, iii are true and iv is false b) i, iv are true and ii is false c) i, ii are true and iii, iv are false d) ii, iii, iv are true and i is false

Description : Deciding how much testing is enough should take into account:- i. Level of Risk including Technical and Business product and project risk ii. Project constraints such as time and budget iii. Size of Testing Team iv. Size ... ii are true and iii, iv are false d) ii, iii, iv are true and i is false

Last Answer : c) i, ii are true and iii, iv are false

Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV

Description : Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV

Last Answer : C.I, III &IV

Which of the following is a requirement of an effective software environment? I. Ease of use II. Capacity for incremental implementation III. Capability of evolving with the needs of a project IV. Inclusion of advanced tools A.I, II &III B.I, II &IV C.II, III&IV D.I, III&IV

Description : Which of the following is a requirement of an effective software environment? I. Ease of use II. Capacity for incremental implementation III. Capability of evolving with the needs of a project IV. Inclusion of advanced tools A.I, II &III B.I, II &IV C.II, III&IV D.I, III&IV

Last Answer : A.I, II &III

System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior to starting of the system testing III. All components are under formal, automated configuration and release management control A. I and II only B. II and III only C. I and III only D. I, II and III

Description : System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior ... . I and II only B. II and III only C. I and III only D. I, II and III

Last Answer : D. I, II and III

Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the program is defect free. c) The purpose of testing is to demonstrate that the program does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Description : Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the ... does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.

Last Answer : d) Testing is executing Software for the purpose of finding defects.

Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Description : Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers

Last Answer : b) Independent testers see other and different defects and are unbiased.

Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or unrelated software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Description : Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or ... software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Last Answer : c) Regression Testing

In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is intended C. Understand the risks and benefits of the development methodology that is to be used in correcting the software system D. Know new enhancement and basic understanding of how the application is implemented in users organization

Description : In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is ... D. Know new enhancement and basic understanding of how the application is implemented in users organization

Last Answer : Understand the risks and benefits of the development methodology that is to be used in correcting the software system

The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Description : The selection of test cases for regression testing A. Requires knowledge on the bug fixes and how it affect the system B. Includes the area of frequent defects C. Includes the area which has undergone many/recent code changes D. All of the above

Last Answer : D. All of the above

The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Description : The purpose of software testing is to A. Demonstrate that the application works properly B. Detect the defects C. Validate the logical design

Last Answer : A. Demonstrate that the application works properly

UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Description : UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above

Last Answer : A. Data

a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each requirement is both testable and uniquely identifiable C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Description : a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each ... business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Last Answer : C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable

As a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each requirement is both testable and uniquely identifiable C. To ascertain that each requirement is traceable to a business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Description : As a tester, what is your main objective in reviewing a requirement document? A. To ascertain that each requirement is traceable to a business need B. To ascertain that each ... business need, testable, and uniquely identifiable D. To ascertain that each requirement is uniquely identifiable

Last Answer : B. Test objective

Internal defects in a welded joint can be found by a process called (i) Tension test (ii) Visual inspection (iii) Radio graphing (iv) None

Description : Internal defects in a welded joint can be found by a process called (i) Tension test (ii) Visual inspection (iii) Radio graphing (iv) None

Last Answer : (iii) Radio graphing

The following defines the statement of what the tester is expected to accomplish or validate during testing activity A. Test scope B. Test objective C. Test environment D. None of the above

Description : The following defines the statement of what the tester is expected to accomplish or validate during testing activity A. Test scope B. Test objective C. Test environment D. None of the above

Last Answer : B. Test objective

In data flow testing, objective is to find A. All dc-paths that are not du-paths B. V All du-paths C. All du-paths that are not dc-paths D. All dc-paths

Description : In data flow testing, objective is to find A. All dc-paths that are not du-paths B. V All du-paths C. All du-paths that are not dc-paths D. All dc-paths

Last Answer : C. All du-paths that are not dc-paths

Drivers are also known as: i. Spade ii. Test harness iii. Scaffolding a) i , ii are true and iii is false b) i , iii are true and ii is false

Description : Drivers are also known as: i. Spade ii. Test harness iii. Scaffolding a) i , ii are true and iii is false b) i , iii are true and ii is false

Last Answer : c) ii , iii are true and i is false

Item transmittal report is also known as A. Incident report B. Release note C. Review report D. Audit report

Description : Item transmittal report is also known as A. Incident report B. Release note C. Review report D. Audit report

Last Answer : B. Release note

Verification performed without any executable code is referred to as A. Review B. Static testing C. Validation D. Sanity testing

Description : Verification performed without any executable code is referred to as A. Review B. Static testing C. Validation D. Sanity testing

Last Answer : B. Static testing

For final software acceptance testing, the system should include A. Delivered software B. All user documents C. Final version of oth

Description : For final software acceptance testing, the system should include A. Delivered software B. All user documents C. Final version of oth

Last Answer : D. All of the above

Deliverables of test design phase include all the following except A. Test data B. Test data plan C. Test summary report D. Test procedure plan

Description : Deliverables of test design phase include all the following except A. Test data B. Test data plan C. Test summary report D. Test procedure plan

Last Answer : C. Test summary report

The following phrases relate to the definition of auditing. Which one is incorrect? a. Systematic process b. Objectively obtaining and obtaining evidence c. Assertions about economic actions and events d. Degree of correspondence between assertions and GAAS

Description : The following phrases relate to the definition of auditing. Which one is incorrect? a. Systematic process b. Objectively obtaining and obtaining evidence c. Assertions about economic actions and events d. Degree of correspondence between assertions and GAAS

Last Answer : Degree of correspondence between assertions and GAAS

Twelfth five year plan gave emphasis on (i) Sustainable and Inclusive Growth (ii) Inclusive Growth (iii) Liberalization (iv) None of the above

Description : Twelfth five year plan gave emphasis on (i) Sustainable and Inclusive Growth (ii) Inclusive Growth (iii) Liberalization (iv) None of the above

Last Answer : (i) Sustainable and Inclusive Growth

First Five year plan put emphasis on (i) Education (ii) Industry (iii) Agriculture (iv) Health

Description : First Five year plan put emphasis on (i) Education (ii) Industry (iii) Agriculture (iv) Health

Last Answer : (iii) Agriculture

Each page of the financial information compiled by the accountant should include the following reference, except a. "Unaudited" b. "Compiled, Negative Assurance Expressed" c. "Compiled without Audit or Review" d. "Refer to Compilation Report

Description : Each page of the financial information compiled by the accountant should include the following reference, except a. "Unaudited" b. "Compiled, Negative Assurance Expressed" c. "Compiled without Audit or Review" d. "Refer to Compilation Report

Last Answer : "Compiled, Negative Assurance Expressed"

The increased gain of 10 dbs for single line & ‘D’ marks rails on double/multiple lines shall be employed for classification of defects. (i) defect in weld (ii) defects in rail. * (iii) for both defects on weld & rail. (iv) None of above.

Description : The increased gain of 10 dbs for single line & ‘D’ marks rails on double/multiple lines shall be employed for classification of defects. (i) defect in weld (ii) defects in rail. * (iii) for both defects on weld & rail. (iv) None of above.

Last Answer : ii) defects in rail. *

The Provision and Management of a controlled library containing all the configurations items is called as a) Configuration Control b) Status Accounting c) Configuration Identification d) Configuration Identification

Description : The Provision and Management of a controlled library containing all the configurations items is called as a) Configuration Control b) Status Accounting c) Configuration Identification d) Configuration Identification

Last Answer : The provision and management of a controlled library containing all the configuration items is called Configuration Management. Configuration Management is the process of identifying, organizing, and ... Verification and Audit (ensuring that the configuration items are complete and accurate).

Which of the following software change management activities is most vital to assessing the impact of proposed software modifications? A. Baseline identification B. Configuration auditing C. Change control D. Version control

Description : Which of the following software change management activities is most vital to assessing the impact of proposed software modifications? A. Baseline identification B. Configuration auditing C. Change control D. Version control

Last Answer : C. Change control

ndications of piracetam include the following except: A. Apnoea in preterm infant B. Learning defects in children C. Confusional states in the elderly D. Memory impairment following electroconvulsive therapy

Description : ndications of piracetam include the following except: A. Apnoea in preterm infant B. Learning defects in children C. Confusional states in the elderly D. Memory impairment following electroconvulsive therapy

Last Answer : A. Apnoea in preterm infant