For arc welding current range is usually

For arc welding current range is usually 

(1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A
by

1 Answer

Answer :

For arc welding current range is usually 100 to 350 A

by

Related questions

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

The supply for arc welding is :

Description : The supply for arc welding is : 

Last Answer : The supply for arc welding is : Low voltage, high current ac or dc voltage

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

The braking retardation is usually in the range?

Last Answer : The braking retardation is usually in the range 10 to 15 km phps.

Arc resistance

Description : Arc resistance  (1) increases with increase in arc current (2) decrease with increase in arc current (3) is independent of arc current (4) is independent of arc length

Last Answer : Arc resistance decrease with increase in arc current 

The arc voltage in a circuit breaker is :

Description : The arc voltage in a circuit breaker is :

Last Answer : The arc voltage in a circuit breaker is : in phase with the arc current

Spot welding is used for

Description : Spot welding is used for (1) Thin metal (3) Castings only (2) Rough and irregular surface (4) Thick sections

Last Answer : Spot welding is used for Thin metal

The electrode rod used for welding uses a coating on it

Description : The electrode rod used for welding uses a coating on it 

Last Answer : The electrode rod used for welding uses a coating on it  to give a vapour to serve as a shielding gas to protect the weld area from atmospheric contamination and to provide slag to protect the welded area

The range of frequencies used in induction heating is :

Description : The range of frequencies used in induction heating is :  (A) 0-25 Hz  (C) less than 200 Hz  (B) 50 to 100 Hz  (D) more than 1 kHz

Last Answer : The range of frequencies used in induction heating is : more than 1 kHz

For diesel locomotives the range of horsepower is?

Last Answer : For diesel locomotives the range of horsepower is 1500 to 2500.

The efficiency of a properly designed synchronous motor will usually fall in range?

Last Answer : The efficiency of a properly designed synchronous motor will usually fall in range 85 to 95%.

What should I get for my first welder, arc or stick?

Description : What should I get for my first welder, arc or stick?

Last Answer : ‘pends, I think you should get the arc.

Compare the AC and DC Arc lamps.

Description : Compare the AC and DC Arc lamps.

Last Answer : AC Arc Lamp DC Arc Lamp Cross section area of electrode is same Cross section area of electrode is positive rod is twice that of negative rod Series inductor is used for stability ... supply is used for DC arc lamp Luminous efficiency is less Luminous efficiency is high

Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Description : Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Last Answer : Purpose of coal and ash handling unit :-  To transport coal from coal storage to power plant. A large quantity of ash about 10 to 30 % produced in furnace, the removal of ash from boiler furnace ... disposed off.  Various methods of disposal of ash:  Mechanical system.  Pneumatic system.

The arc temperature in Oil Circuit Breaker may reach up to_______.

Description : The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Last Answer : The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

Which of the following is used in a circuit breaker as the medium in which the arc forms?

Description : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Last Answer : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Arc in a circuit breaker is interrupted at?

Last Answer : Arc in a circuit breaker is interrupted at zero current.

The arc voltage produced in A.C. circuit breaker is always?

Last Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

Arc in a circuit behaves as?

Description : Arc in a circuit behaves as?

Last Answer : Arc in a circuit behaves as a resistance decreasing with voltage rise across the arc.

Explain with sketch electron beam welding.

Description : Explain with sketch electron beam welding. 

Last Answer : Electron Beam Welding Process In EBW process, the heat is generated when the electron beam impinges on work piece. As the high velocity electron beam strikes the surfaces to be welded, their kinetic ... material that is directly in the path is melted which when solidifies form the joint. 

State the four advantages of MIG welding.

Description : State the four advantages of MIG welding.  

Last Answer : Four advantages of MIG welding: 1. High quality welds can be produced much faster. 2. Flux is not used there is no chance for the entrapment of slag in the weld metal resulting in high quality ... of metals and alloys. 5. Least expensive and highly economic. 6. Little or no post welds cleaning.

List two special feature of welding transformer.

Description : List two special feature of welding transformer.

Last Answer : Special features of welding transformer: i) It is a step down transformer that reduces the source voltage to a voltage desired according to the demands of the welding process. ii) Having large primary turns and less ... V ii) Secondary voltage - 40 to 60 V iii) Secondary current - 200 to 600 A

Welding Defects

Description : Welding Defects 

Last Answer : Welding Defects  Welding defects Explanation and causes 1. Cracks Cracks occur when localized stresses exceed the ultimate tensile strength of material. These stresses are developed due to shrinkage ... Too fast a travel, Bad welding technique, Too great a heat build-up.

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

Describe with a neat diagram, the process of any one type of electric welding.

Description : Describe with a neat diagram, the process of any one type of electric welding. 

Last Answer : Methods of electric welding :  1. Resistance welding  i Butt welding  ii Spot welding  iii Seam welding  iv Projection welding  2. Arc Welding  i Carbon arc welding  ii ... as copper, iron etc. The electric arc effectively concentrate heat on the surfaces it is desired to join.

Give any three features and any two applications of welding transformer.

Description : Give Any Three Features And Any Two Applications Of Welding Transformer.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Welding generator will have?

Last Answer : Welding generator will have lap winding.

How to Light the Pilot Light on a Gas Range

Description : How to Light the Pilot Light on a Gas Range

Last Answer : How to Light the Pilot Light on a Gas Range Gas ranges are easy to work with, you just turn the knob and they're ready to be used. Sometimes, though, your gas range's pilot light goes off, ... , though, it's best to contact a local gas company or the manufacturer, to help you solve the problem.

State RADAR range equation and write factor influencing maximum range.

Description : State RADAR range equation and write factor influencing maximum range.

Last Answer : Free Space RADAR range Equation: 1.RADAR range equation relates the range of a RADAR to the chara. Of Tx, Rx, Antenna, target & environment. 2.Free space means RADAR and target are isolated in ... is no obstacle between RADAR antenna & the target. 4.There will be No absorption of EM waves.

Define: i) Range ii) Span of instruments

Description : Define: i) Range ii) Span of instruments

Last Answer : i) Range: It is defined as the difference between Greatest and Smallest value of the data or reading of the instrument.  ii) Span: It is defined as the algebraic difference between the upper and lower range values

State the advantages of instrument transformer in using for extension of range of meters.

Description : State the advantages of instrument transformer in using for extension of range of meters. 

Last Answer : Advantages of instrument transformer: 1. Extension of instrument range is possible. 2. Isolation of instruments from high voltage side. 3. Power loss is less as compared to shunts and multipliers. 4 ... measurement. 5. It is economical method of range extension. 6. Increases in safety of operator.

State the range for low and medium resistance.

Description : State the range for low and medium resistance.

Last Answer : Low resistances: less than 1 ohm.  Medium resistances: 1 ohm to 0.1 Mega ohm. 

How range of A.C. ammeter & A.C. voltmeter is extended? Draw suitable diagram.

Description : How range of A.C. ammeter & A.C. voltmeter is extended? Draw suitable diagram.

Last Answer : Extension of A.C. Ammeter Range: The range of a.c. ammeter can be extended by using CT, the arrangement is shown in figure. The CT is current transformer having less number of primary turns carrying high ... high magnitude of source voltage. In this way range of a.c. voltmeter can be extended.

List two types of oscillator, which generates frequency in RF range.

Description : List two types of oscillator, which generates frequency in RF range.

Last Answer : Types of Oscillators generating frequencies in RF range: i) Hartley Oscillator ii) Colpitt’s Oscillator iii) Clapp Oscillator

What is the frequency range of VHF electromagnetic waves?

Description : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

Last Answer : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

The wattage rating for a ceiling fan motor will be in the range?

Last Answer : The wattage rating for a ceiling fan motor will be in the range 50 to 150 W .

The range of efficiency for shaded pole motors is?

Last Answer : The range of efficiency for shaded pole motors is 5% to 35%.

What are the pros and cons of becoming a welder?

Description : What are the pros and cons of becoming a welder?

Last Answer : answer:It's a good craft and well paid when there is work. If you're into the building trades, it is a good choice. On the other hand, you don't do much more than weld all the time. And if ... working construction you might be in a ditch or outdoors in bad weather. But that's true of a lot of jobs.

What is the simplest way to get accurate measurements for stairs and guardrail?

Description : What is the simplest way to get accurate measurements for stairs and guardrail?

Last Answer : A Square is the quickest way…

What is the best method for bending aluminum square tubing while keeping a tight radius and minimum distortion?

Description : What is the best method for bending aluminum square tubing while keeping a tight radius and minimum distortion?

Last Answer : Buy a pipe bender from a hardware store. Then fill the pipe with water and freeze it, this will stop it form compressing.

The commonly used gases in tungsten arc welding are

Description : The commonly used gases in tungsten arc welding are 1.Hydrogen and oxygen 2.Hydrogen and organ 3.Hydrogen and helium 4.Helium and argon

Last Answer : The commonly used gases in tungsten arc welding are Helium and argon

Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Last Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

Current division rule example

Description : Current division rule example

Last Answer : Current division rule example

A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

Find current through resistor using nodal analysis

Description : Find current through resistor using nodal analysis

Last Answer : Find current through resistor using nodal analysis

Nodal analysis problem two current source

Description : Nodal analysis problem two current source

Last Answer : Nodal analysis problem two current source

Direct Current (DC)

Description : Direct Current (DC) Next Topic : Alternating current (AC)

Last Answer : Direct Current (DC) is the unidirectional electric current. Uni meaning is one. And the flow of charge in same direction. We know that conventional current flow from positive terminal of battery to ... The magnitude of DC may constant or vary but direction do not change with respect to time.

Alternating current (AC)

Description : Alternating current (AC)

Last Answer : AC stands for Alternating Current meaning voltage or current that changes polarity or direction respectively over time. An Alternating Current (AC) is an electric current whose magnitude ... energy are known as alternators and are simpler construction than DC electromechanical generators.