Which statement is false about WR signal: a. WR signal controls the input buffer b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input

Which statement is false about WR signal:
a. WR signal controls the input buffer
b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input
by

1 Answer

Answer :

c. The bar over WR means that this is an active high signal
by

Related questions

In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

When the write enable input is not asserted, the gated D latch ______ its output. a. can not change b. clears c. sets d. complements

Description : When the write enable input is not asserted, the gated D latch ______ its output. a. can not change b. clears c. sets d. complements

Last Answer : a. can not change

Which of the following pair of gates can form a latch? a. a pair of cross coupled OR b. a pair of cross copled AND c. a pair of cross coupled NAND d. a cross coupled NAND/OR

Description : Which of the following pair of gates can form a latch? a. a pair of cross coupled OR b. a pair of cross copled AND c. a pair of cross coupled NAND d. a cross coupled NAND/OR

Last Answer : c. a pair of cross coupled NAND

Which of the following conditions is not allowed in an RS latch? a. R is asserted, S is asserted b. R is asserted, S is negated c. R is negated, S is asserted d. R is negated, S is negated

Description : Which of the following conditions is not allowed in an RS latch? a. R is asserted, S is asserted b. R is asserted, S is negated c. R is negated, S is asserted d. R is negated, S is negated

Last Answer : a. R is asserted, S is asserted

Of the following circuits, the one which involves storage is a. RS Latch b. mux c. nand d. decoder

Description : Of the following circuits, the one which involves storage is a. RS Latch b. mux c. nand d. decoder

Last Answer : a. RS Latch

Which latch is mostly used creating memory register: a. SR-Latch b. JK-Latch c. D-Latch d. T-Latch

Description : Which latch is mostly used creating memory register: a. SR-Latch b. JK-Latch c. D-Latch d. T-Latch

Last Answer : c. D-Latch

When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Description : When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Last Answer : b. Output

When memory read or I/O read are active data is to the processor : a. Input b. Output c. Processor d. None of these

Description : When memory read or I/O read are active data is to the processor : a. Input b. Output c. Processor d. None of these

Last Answer : a. Input

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is a. Memory b. Buffer c. Accumulator d. Address

Description : A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is a. Memory b. Buffer c. Accumulator d. Address

Last Answer : b. Buffer

Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the internal buffers using RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Last Answer : d) iii

In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

______ signal is generated by combining RD and WR signals with IO/M.

Description : ______ signal is generated by combining RD and WR signals with IO/M.   (a) Control (b) System (c) Register (d) Memory

Last Answer : Control signal is generated by combining RD and WR signals with IO/M. 

Which statement is wrong according to linear decoding : a. Address map is not contiguous. b. Confects occur if two of the select lines become active at the same time c. If all unused address lines are not used as chip selectors then these unused lines become don’t cares d. None of these

Description : Which statement is wrong according to linear decoding : a. Address map is not contiguous. b. Confects occur if two of the select lines become active at the same time c. If all unused address lines are not used as chip selectors then these unused lines become don’t cares d. None of these

Last Answer : d. None of these

Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : b. Memory

The use of spooler programs and/or …. Hardware allows personal computer operators to do the processing work at the same time a printing operation is in progress a. Registered mails b. Memory c. CPU d. Buffer

Description : The use of spooler programs and/or …. Hardware allows personal computer operators to do the processing work at the same time a printing operation is in progress a. Registered mails b. Memory c. CPU d. Buffer

Last Answer : d. Buffer

A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Last Answer : d. Address register

A directly accessible appointment calendar is feature of a … resident package a. CPU b. Memory c. Buffer d. ALU

Description : A directly accessible appointment calendar is feature of a … resident package a. CPU b. Memory c. Buffer d. ALU

Last Answer : b. Memory

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Description : A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Last Answer : a. Dies all the thinking for a compute

computer operators a. writes computer programs for specific problems b. operate the device which input and output data from the computer c. normally require a college degree in computer science d. all of the above

Description : computer operators a. writes computer programs for specific problems b. operate the device which input and output data from the computer c. normally require a college degree in computer science d. all of the above

Last Answer : b. operate the device which input and output data from the computer

An input /output device at which data enters or leaves a computer system is a. Keyboard b. Terminal c. Printer d. Plotter

Description : An input /output device at which data enters or leaves a computer system is a. Keyboard b. Terminal c. Printer d. Plotter

Last Answer : b. Terminal

Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Description : Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Last Answer : a. Mouse

A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Description : A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Last Answer : b. Input, storage, manipulation and outputting of data

A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Description : A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Last Answer : a. Does all the thinking for a computer

The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Description : The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Last Answer : C. address decoder

Regarding a VDU, Which statement is more correct? a. It is an output device b. It is an input device c. It is a peripheral device d. It is hardware item

Description : Regarding a VDU, Which statement is more correct? a. It is an output device b. It is an input device c. It is a peripheral device d. It is hardware item

Last Answer : c. It is a peripheral device

The CPU sends out a ____ signal to indicate that valid data is available on the data bus: a. Read b. Write c. Both A and B

Description : The CPU sends out a ____ signal to indicate that valid data is available on the data bus: a. Read b. Write c. Both A and B

Last Answer : b. Write

Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Description : Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Last Answer : d) P3.1

Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Description : Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Last Answer : c) P3.6

The CU is designed by using which techniques: a. HARDWIRED CONTROLS b. MICROPROGRAMING c. NANOPROGRAMING d. ALL OF THESE

Description : The CU is designed by using which techniques: a. HARDWIRED CONTROLS b. MICROPROGRAMING c. NANOPROGRAMING d. ALL OF THESE

Last Answer : d. ALL OF THESE

.In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Description : .In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Last Answer : b) 512

In Unix operating system, special files are used to : (A) buffer data received in its input from where a process reads (B) provide a mechanism to map physical device to file names (C) store list of file names plus pointers associated with i-nodes (D) store information entered by a user application program or utility program

Description : In Unix operating system, special files are used to : (A) buffer data received in its input from where a process reads (B) provide a mechanism to map physical device to file names (C ... pointers associated with i-nodes (D) store information entered by a user application program or utility program

Last Answer : (B) provide a mechanism to map physical device to file names 

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : a) EA, high, internal, external

What environmental factor controls the amount of sunlight that reaches underwater plants and animals?

Description : What environmental factor controls the amount of sunlight that reaches underwater plants and animals?

Last Answer : sun

What environmental factor controls the amount of sunlight that reaches underwater plants and animals?

Description : What environmental factor controls the amount of sunlight that reaches underwater plants and animals?

Last Answer : sun

What does the WR series number represent on standard Wire Rope Isolator (WRI)?

Description : What does the WR series number represent on standard Wire Rope Isolator (WRI)?

Last Answer : The number following WR represents the wire diameter in 32nd of an inch. The WRS series isolators use 5/32” diameter wire.

A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Description : A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Last Answer : (B) 2WR/ 3

The maximum value of hoop compression in a dome is given by (A) wR / 4d (B) wR/2d (C) wR/d (D) 2wR/d Where, w = load per unit area of surface of dome R = radius of curvature d = thickness of dome

Description : The maximum value of hoop compression in a dome is given by (A) wR / 4d (B) wR/2d (C) wR/d (D) 2wR/d Where, w = load per unit area of surface of dome R = radius of curvature d = thickness of dome

Last Answer : (B) wR/2d

Outputs of instruction/data path in CU are. a. Reg R/W b. Load/Reg-Reg c. ALU function select d. Load control e. Read control f. IR Latch g. JUMP/Branch/Next PC h_ = All of these

Description : Outputs of instruction/data path in CU are. a. Reg R/W b. Load/Reg-Reg c. ALU function select d. Load control e. Read control f. IR Latch g. JUMP/Branch/Next PC h_ = All of these

Last Answer : h_ = All of these

If m is a power of 2, the number of select lines required for an m-input mux is: a. m b. 2^m c. log2 (m) d. 2*m

Description : If m is a power of 2, the number of select lines required for an m-input mux is: a. m b. 2^m c. log2 (m) d. 2*m

Last Answer : c. log2 (m)

The minimum number of transistors required to implement a two input AND gate is a. 2 b. 4 c. 6 d. 8

Description : The minimum number of transistors required to implement a two input AND gate is a. 2 b. 4 c. 6 d. 8

Last Answer : c. 6

To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Description : To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Last Answer : (ii) lower the READY input

Which one of the following input device is user-programmable? a. Dumb terminal b. Smart terminal c. VDT d. Intelligent terminal

Description : Which one of the following input device is user-programmable? a. Dumb terminal b. Smart terminal c. VDT d. Intelligent terminal

Last Answer : d. Intelligent terminal

What type of device is computer keyboard? a. Memory b. Output c. Storage d. Input

Description : What type of device is computer keyboard? a. Memory b. Output c. Storage d. Input

Last Answer : d. Input

Magnetic tape can serve as a. Secondary storage media b. Output media c. Input media d. All of the above

Description : Magnetic tape can serve as a. Secondary storage media b. Output media c. Input media d. All of the above

Last Answer : d. All of the above

A computer consists of a. A central processing unit b. A memory c. Input and output unit d. All of the above

Description : A computer consists of a. A central processing unit b. A memory c. Input and output unit d. All of the above

Last Answer : d. All of the above

Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Description : Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Last Answer : d. All of the above