The CU is designed by using which techniques: a. HARDWIRED CONTROLS b. MICROPROGRAMING c. NANOPROGRAMING d. ALL OF THESE

The CU is designed by using which techniques:
a. HARDWIRED CONTROLS
b. MICROPROGRAMING
c. NANOPROGRAMING
d. ALL OF THESE
by

1 Answer

Answer :

d. ALL OF THESE
by

Related questions

Which is the simplest method of implementing hardwired control unit? a) State Table Method b) Delay Element Method c) Sequence Counter Method d) Using Circuits

Description : Which is the simplest method of implementing hardwired control unit? a) State Table Method b) Delay Element Method c) Sequence Counter Method d) Using Circuits

Last Answer : Answer: a Explanation: There are 3 ways of implementing hardwired control unit: A state table is the simplest method in which a number of circuits are designed based on the cells in the table. ... a delay element. A sequence counter method used k-modulo counter as a replacement for k delay elements

Which statement is false about WR signal: a. WR signal controls the input buffer b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input

Description : Which statement is false about WR signal: a. WR signal controls the input buffer b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input

Last Answer : c. The bar over WR means that this is an active high signal

Which is not the main feature of DEC Alpha: a. 64 Bit RISC processor b. Designed to replace 32 VAX(CISC) c. Seven stage split integer/floating point pipeline d. Variable Instruction length

Description : Which is not the main feature of DEC Alpha: a. 64 Bit RISC processor b. Designed to replace 32 VAX(CISC) c. Seven stage split integer/floating point pipeline d. Variable Instruction length

Last Answer : d. Variable Instruction length

Intel Itanium processors are designed fora.Servers and personal computers b.Servers only c.Personal computers onlyd.Calculators

Description : Intel Itanium processors are designed fora.Servers and personal computers b.Servers only c.Personal computers onlyd.Calculators

Last Answer : b.Servers only

In 1830, Charles Babbage designed a machine called the analytical engine, which he showed at the parts exhibition. In which year was it exhibited? a. 1820 b. 1860 c. 1855 d. 1970

Description : In 1830, Charles Babbage designed a machine called the analytical engine, which he showed at the parts exhibition. In which year was it exhibited? a. 1820 b. 1860 c. 1855 d. 1970

Last Answer : c. 1855

programs designed to perform specific tasks is known as a. system software b. application software c. utility programs d. operating system

Description : programs designed to perform specific tasks is known as a. system software b. application software c. utility programs d. operating system

Last Answer : c. utility programs

Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Description : Who designed the first electronics computer – ENIAC? a. Van-Neumann b. Joseph M. Jacquard c. J. Presper Eckert and John W Mauchly d. All of above

Last Answer : c. J. Presper Eckert and John W Mauchly

In 1830, Charles Babbage designed a machine called the Analytical Engine which he showed at the Paris Exhibition. In which year was it exhibition? a. 1820 b. 1860 c. 1855 d. 1870

Description : In 1830, Charles Babbage designed a machine called the Analytical Engine which he showed at the Paris Exhibition. In which year was it exhibition? a. 1820 b. 1860 c. 1855 d. 1870

Last Answer : c. 1855

I must admit to loving the "scent of a woman" as Al Pacino might say. The scent of vanilla will always turn my head. Are any other guys out there seemingly hardwired for vanilla-based fragrances? If so, why?

Description : I must admit to loving the "scent of a woman" as Al Pacino might say. The scent of vanilla will always turn my head. Are any other guys out there seemingly hardwired for vanilla-based fragrances? If so, why?

Last Answer : Women smell like vanilla? This is news to me.

If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit. a) Micro programmed b) Software c) Logic d) Hardwired

Description : If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit. a) Micro programmed b) Software c) Logic d) Hardwired

Last Answer : Answer: d Explanation: The main task of a control unit is to generate control signals. There are two main types of control units: A hardwired control unit generates control ... combinational logic circuits and the Micro programmed control unit generates control signals by using some softwares

Which control unit is implemented as combinational circuit in the hardware. a. Microprogrammed control unit b. Hardwired control unit c Blockprogrammed control unit d. Macroprogrammed control unit

Description : Which control unit is implemented as combinational circuit in the hardware. a. Microprogrammed control unit b. Hardwired control unit c Blockprogrammed control unit d. Macroprogrammed control unit

Last Answer : b. Hardwired control unit

For CISC architecture___ controllers are better: a. Microprogrammed b. Hardwired c. Betterwired d. None of these

Description : For CISC architecture___ controllers are better: a. Microprogrammed b. Hardwired c. Betterwired d. None of these

Last Answer : a. Microprogrammed

Today, many companies are using managerial techniques that are designed to encourage _________. A. increasing profits B. legal compliances C. Ethical behaviour D. shareholders value

Description : Today, many companies are using managerial techniques that are designed to encourage _________. A. increasing profits B. legal compliances C. Ethical behaviour D. shareholders value

Last Answer : C. Ethical behaviour

Which of the following control techniques available to the researcher controls for both known and unknown variables? a. Building the extraneous variable into the design b. Matching c. Random assignment d. Analysis of covariance

Description : Which of the following control techniques available to the researcher controls for both known and unknown variables? a. Building the extraneous variable into the design b. Matching c. Random assignment d. Analysis of covariance

Last Answer : c. Random assignment

Are voice command/wifi type switches and controls designed for singles?

Description : Are voice command/wifi type switches and controls designed for singles?

Last Answer : I agree that robot vacuums sometimes turn on for no good reason, but Alexa has a whisper mode that works really well.

Equalization of the power factors of two alternators operating in parallel is accomplished _____________. A. manually, by adjusting the governor controls B. automatically, by automatic voltage regulators C. manually, adjusting the output of current transformers D. automatically, by the designed action of the governors

Description : Equalization of the power factors of two alternators operating in parallel is accomplished _____________. A. manually, by adjusting the governor controls B. automatically, by automatic voltage regulators ... the output of current transformers D. automatically, by the designed action of the governors

Last Answer : Answer: B

Which statement best describes the emphasis of the systems and substantive approaches in the audit plan? a. A thoroughly designed systems approach to auditing can eliminate the need for any substantive procedures. b. The systems approach focuses on detailed testing of specific accounts for accuracy, while the substantive approach is the testing controls to make sure they are effective. c. The systems approach focuses on testing controls to make sure they are effective, while the substantive approach is the detailed testing of specific accounts for accuracy. d. The systems approach focuses on the use of computer systems to aid in the audit while the substantive approach focuses on more manual tests

Description : Which statement best describes the emphasis of the systems and substantive approaches in the audit plan? a. A thoroughly designed systems approach to auditing can eliminate the need for any ... computer systems to aid in the audit while the substantive approach focuses on more manual tests

Last Answer : The systems approach focuses on testing controls to make sure they are effective, while the substantive approach is the detailed testing of specific accounts for accuracy

Which of the following best describes the operational audit? a. It requires the constant review by internal auditors of the administrative controls as they relate to operations othe company. b. It concentrates on implementing financial and accounting control in a newly organized company. c. It concentrates on seeking out aspects of operations in which waste would be reduced by the introduction of controls. d. It attempts and is designed to verify the fair presentation of a company's results of operations.f

Description : Which of the following best describes the operational audit? a. It requires the constant review by internal auditors of the administrative controls as they relate to operations ofthe company. b. It ... attempts and is designed to verify the fair presentation of a company's results of operations.

Last Answer : It concentrates on seeking out aspects of operations in which waste would be reduced by the introduction of controls

The advantage of following the IEEE Standard for drawing up aProject Management Plan (SPMP) – see IEEE Standard 1059.1 1987 – is a) It is drawn up by representatives from major development organisations b) It is designed for all types of products c) It is a framework that can be used irrespective of process model or specific techniques d) It can be tailored for each organisation for a particular applicationarea, development team or technique. e) All of the above.

Description : The advantage of following the IEEE Standard for drawing up a Project Management Plan (SPMP) - see IEEE Standard 1059.1 1987 - is a) It is drawn up by representatives from major  ... each organisation for a  particular applicationarea, development team or  technique. e) All of the above.

Last Answer : e) All of the above.

They were fabricated using a low power version of the HMOS technology called____: a. HSMOS b. HCMOS c. HSSOM d. None of these

Description : They were fabricated using a low power version of the HMOS technology called____: a. HSMOS b. HCMOS c. HSSOM d. None of these

Last Answer : b. HCMOS

Microprocessor is fabricated on single chip using: a. MOS b. ALU c. CPU d. All of these

Description : Microprocessor is fabricated on single chip using: a. MOS b. ALU c. CPU d. All of these

Last Answer : a. MOS

We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Description : We say that a set of gates is logically complete if we can build any circuit without using any other kind of gates. Which of the following sets are logically complete a. set of {AND,OR} b. set of {EXOR, NOT} c. set of {AND,OR,NOT} d. None of the above

Last Answer : c. set of {AND,OR,NOT}

Using DeMorgan's Theorem we can convert any AND-OR structure into a. NAND-NAND b. OR-NAND c. NAND-NOR d. NOR-NAND

Description : Using DeMorgan's Theorem we can convert any AND-OR structure into a. NAND-NAND b. OR-NAND c. NAND-NOR d. NOR-NAND

Last Answer : a. NAND-NAND

Who built the world’s first electronic calculator using telephone relays, light bulbs and batteries/ a. Claude Shannon b. Konrard Zues c. George Stibits d. Howard H. Aiken

Description : Who built the world’s first electronic calculator using telephone relays, light bulbs and batteries/ a. Claude Shannon b. Konrard Zues c. George Stibits d. Howard H. Aiken

Last Answer : c. George Stibits

who is credited with the idea of using punch cards to control patterns of a weaving machine? a. Pascal b. Hollerith c. Babbage d. Jacquard

Description : who is credited with the idea of using punch cards to control patterns of a weaving machine? a. Pascal b. Hollerith c. Babbage d. Jacquard

Last Answer : d. Jacquard

which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Description : which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Last Answer : b. PROM

A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Description : A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Last Answer : d. All of the above

Who is credited with the idea of using punch cards to control patterns in a waving machine? a. Pascal b. Hollerith c. Babbage d. Jacquard

Description : Who is credited with the idea of using punch cards to control patterns in a waving machine? a. Pascal b. Hollerith c. Babbage d. Jacquard

Last Answer : d. Jacquard

The microcomputer system by using the ____device interface: a. Input b. Output c. Both A and B d. None of these

Description : The microcomputer system by using the ____device interface: a. Input b. Output c. Both A and B d. None of these

Last Answer : c. Both A and B

Which RAM is created using MOS transistors: a. Dynamic RAM b. Static RAM c. Permanent RAM

Description : Which RAM is created using MOS transistors: a. Dynamic RAM b. Static RAM c. Permanent RAM

Last Answer : a. Dynamic RAM

The ram which is created using bipolar transistors is called: a. Dynamic RAM b. Static RAM c. Permanent RAM d. DDR RAM

Description : The ram which is created using bipolar transistors is called: a. Dynamic RAM b. Static RAM c. Permanent RAM d. DDR RAM

Last Answer : b. Static RAM

Using 12 binary digits how many unique house addresses would be possible: a. 28=256 b. 212=4096 c. 216=65536 d. None of these

Description : Using 12 binary digits how many unique house addresses would be possible: a. 28=256 b. 212=4096 c. 216=65536 d. None of these

Last Answer : b. 212=4096

CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Description : CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Last Answer : b. Data bus

The external system bus architecture is created using from ______ architecture: a. Pascal b. Dennis Ritchie c. Charles Babbage d. Von Neumann

Description : The external system bus architecture is created using from ______ architecture: a. Pascal b. Dennis Ritchie c. Charles Babbage d. Von Neumann

Last Answer : d. Von Neumann

The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Description : The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Last Answer : a. Stack pointer register

Which technology using the microprocessor is fabricated on a single chip: a. POS b. MOS c. ALU d. ABM

Description : Which technology using the microprocessor is fabricated on a single chip: a. POS b. MOS c. ALU d. ABM

Last Answer : b. MOS

Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

Which of the following is not a program linking directive i) EXTRN ii) SEGMENT iii) NAME iv) PUBLIC v) USING a) iv, v b) ii, iii c) i, iii d) ii, v

Description : Which of the following is not a program linking directive i) EXTRN ii) SEGMENT iii) NAME iv) PUBLIC v) USING a) iv, v b) ii, iii c) i, iii d) ii, v

Last Answer : c) i, iii

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the internal buffers using RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Last Answer : d) iii

If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : a) EA, high, internal, external

Explain ALIGN & ASSUME

Description : Explain ALIGN & ASSUME

Last Answer : The ALIGN directive forces the assembler to align the nextsegment at an address divisible by specified divisor. The format is ALIGN number where number can be 2, 4, 8 or 16. Example ALIGN 8. The ASSUME ... the segment registers at execution time. Example ASSUME CS: code, DS: data, SS: stack

What is linker

Description : What is linker

Last Answer : A linker is a program used to join together several object files into one large object file. For large programs it is more efficient to divide the large program modules into ... & debugged. When all the modules work they are linked together to form a large functioning program.

What is loader

Description : What is loader

Last Answer : The loader copies the program into the computer’s main memory at load time and begins the program execution at execution time.

What is assembler

Description : What is assembler

Last Answer : The assembler translates the assembly language program text which is given as input to the assembler to their binary equivalents known as object code. The time required to translate the assembly code ... time. The assembler checks for syntax errors & displays them before giving the object code.

How does the microprocessor differentiate between data and instruction

Description : How does the microprocessor differentiate between data and instruction

Last Answer : When the first m/c code of an instruction is fetched and decoded in the instruction register, the microprocessor recognizes the number of bytes required to fetch the entire ... will be considered as data & the byte after the data will be treated as the next instruction.

What is Microcontroller and Microcomputer

Description : What is Microcontroller and Microcomputer

Last Answer : Microcontroller is a device that includes microprocessor; memory and I/O signal lines on a single chip, fabricated using VLSI technology. Microcomputer is a computer that is designed using microprocessor as its CPU. It includes microprocessor, memory and I/O.

Why do we use XRA A instruction

Description : Why do we use XRA A instruction

Last Answer : The XRA A instruction is used to clear the contents of the Accumulator and store the value 00H.

Define stack and explain stack related instructions

Description : Define stack and explain stack related instructions

Last Answer : The stack is a group of memory locations in the R/W memory thatis used for the temporary storage of binary information during the execution of the program. The stack related instructions are PUSH & POP

What is the use of bi-directional buffers?

Description : What is the use of bi-directional buffers?

Last Answer : It is used to increase the driving capacity of the data bus. The data bus of a microcomputer system is bi-directional, so it requires a buffer that allows the data to flow in both directions.