Integrating principle in the digital measurement is the conversion of

Integrating principle in the digital measurement is the conversion of 

 (a) Voltage to time (b) Voltage to frequency (c) Voltage to current (d) Current to voltage
by

1 Answer

Answer :

Integrating principle in the digital measurement is the conversion of Voltage to frequency

by

Related questions

An integrating digital voltmeter measures ...

Description : An integrating digital voltmeter measures  A) true average value B) rms value C) peak value D) peak to peak value

Last Answer : An integrating digital voltmeter measures true average value. 

State working principle of analog to digital and digital to analog conversion.

Description : State working principle of analog to digital and digital to analog conversion.

Last Answer : i) Analog-to-digital Converters: In a digital computer control system, the plant output (or controlled variable) is usually an analog signal, which is measured by sensors (or instruments). This ... that provides an output voltage or current normalized to a full-scale (FS) reference value.

Which of the following instruments can be used for measurement of very high value resistances such as

Description : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

Last Answer : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings

Description :  In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings of the wattmeters are 4 kW and 2 kW respectively, the later is being taken after reversing the connections of current coil. the ... kVAR B) 0.2 & 6 √3 kVAR C) 0.32 & 2 kVAR D) 0.32 & 2 √3 kVAR

Last Answer :  In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings of the wattmeters are 4 kW and 2 kW respectively, the later is being taken after reversing the ... of current coil. the power factor and reactive power of the load is 0.2 & 6 √3 kVAR

The function of measurement system is/are _____.

Description : The function of measurement system is/are _____.

Last Answer : The function of measurement system are indicating, recording and controlling function.

For power measurement of three phase circuit by two wattmeter method, when the value of power factor

Description : For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging:

Last Answer : For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging: One of the wattmeter connections will have to be reversed

The measurement range of an ammeter can be increased by using a:

Description : The measurement range of an ammeter can be increased by using a:

Last Answer : The measurement range of an ammeter can be increased by using a: low resistance in shunt

Clamp on ammeter is used for measurement of:

Description : Clamp on ammeter is used for measurement of:

Last Answer : Clamp on ammeter is used for measurement of: large alternating currents

Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of

Description : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is   (A)sinusoidal (B) square (C) rectangular (D) triangular

Last Answer : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is sinusoidal 

Measurement of power and power factor of a 3-phase system by two wattmeter method can be

Description : Measurement of power and power factor of a 3-phase system by two wattmeter method can be obtained in case of  1. Balanced load and balanced source  2. Balanced source with 3-phase 3-wire unbalanced load  3. Unbalanced source with 3-phase 3 ... b) 2, 3 and 5 (c) 1, 2, 3, 4 and 5 (d) 1, 2, 3 and 5 

Last Answer : Measurement of power and power factor of a 3-phase system by two wattmeter method can be obtained in case of  1. Balanced load and balanced source  2. Balanced source with 3-phase 3-wire unbalanced load  3. Unbalanced source with 3- ... b) 2, 3 and 5 (c) 1, 2, 3, 4 and 5 (d) 1, 2, 3 and 5 

In the measurement of power by two wattmeter method, when the readings of the two

Description : In the measurement of power by two wattmeter method, when the readings of the two wattmeters are equal, the power factor is (A) Zero (B) Leading (C) Lagging (D) Unity

Last Answer : In the measurement of power by two wattmeter method, when the readings of the two wattmeters are equal, the power factor is Unity

For measurement of radio frequency ac signals __________ type meter is used

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

Measurement of a non -electrical quantity involves the following four subsystems:

Description : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is  (1) d,a,c,b (2) d, c, a, b (3) a, c, b, d (4) a, b, c, d

Last Answer : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is d,a,c,b

The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm

Description : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Last Answer : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Accurate measurement of very low resistances is possible with

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

A measure of the reproducibility of measurement is known as

Last Answer : A measure of the reproducibility of measurement is known as Precision.

The absolute measurement of resistance is done by

Last Answer : The absolute measurement of resistance is done by Lorenz method.

Why is a MISC meter not recommended for DC measurement?

Last Answer : MISC meter not recommended for DC measurement because the error is high due to the hysteresis effect.

Ryall crest voltmeter is used for measurement of

Last Answer : Ryall crest voltmeter is used for measurement of High AC voltage.

An instrument to be used for measurement and control should preferably have

Last Answer : An instrument to be used for measurement and control should preferably have Linear output and fast response

In the case of power measurement by two wattmeter method in a balanced 3Φ system with a pure inductive load

Last Answer : In the case of power measurement by two wattmeter method in a balanced 3Φ system with a pure inductive load both the Wattmeter will indicate the same but of opposite sign.

Kelvin double bridge is best suited for the measurement of:

Last Answer : Kelvin double bridge is best suited for the measurement of: Low resistance

Megger is an instrument used for the measurement of:

Last Answer : Megger is an instrument used for the measurement of: High resistance and insulation resistance

Hay’s Bridge is suitable for the measurement of:

Last Answer : Hay’s Bridge is suitable for the measurement of: Inductances with Q>10.

The power measurement in a balanced 3-phase circuit can be done by:

Last Answer : The power measurement in a balanced 3-phase circuit can be done by: One wattmeter method, Two wattmeter method, Three wattmeter method.

Commonly used instruments in power system measurement are?

Last Answer : Commonly used instruments in power system measurement are induction.

For measurement of inductance having high value, we should use?

Last Answer : For measurement of inductance having high value, we should use Hay's bridge.

For measurement of mutual inductance we can use?

Last Answer : For measurement of mutual inductance we can use Heaviside bridge.

In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero...

Description : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be?

Last Answer : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be 0.5.

In a 3-phase power measurement by two wattmeter method, both the wattmeters had identical readings...

Description : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

Last Answer : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was unity.

The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is

Last Answer : The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is 12μs.

A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is 4096μs.

I'm looking to replace sugar with honey when cooking; is there a standard measurement conversion?

Description : I'm looking to replace sugar with honey when cooking; is there a standard measurement conversion?

Last Answer : Check Joy of Cooking. In the middle, I recall a measuring replacement of everything.

Measurement conversion?

Description : Measurement conversion?

Last Answer : Converting measurements does not require a chart. You can convert measurements through Google's search bar by simply using the following formula : 2 cups in quarts.

Shouldn't American Whites get busy integrating themselves?

Description : Shouldn't American Whites get busy integrating themselves?

Last Answer : Ah, but we are. We are improving our racist attitudes and our young people are much more accepting of differences.

Any tips for integrating a new manager?

Description : Any tips for integrating a new manager?

Last Answer : answer:It sounds like M*A*S*H, and your department is the Swamp and it is about to have Frank Burns move in. From experience in working in similar situations, it often just takes additional time to ... the job done more quickly, thus saving the company money. (It works really well on children, too.)

How has foreign trade been integrating markets of different countries in the world ? Explain with examples. -SST 10th

Description : How has foreign trade been integrating markets of different countries in the world ? Explain with examples. -SST 10th

Last Answer : 1. Foreign trade creates an opportunity for the producers to reach beyond the domestic markets, i.e., markets of their own countries. 2. The competition is thus not just within the county, but also ... and lights in India, which led to a lowering of prices of these products in both the countries.

An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Description : An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Last Answer : Answer : D

The tubular and dorsal nervous system of chordates is related to the cephalization in these animals and to bilateral symmetry. The presence of neural integrating centers with concentration of neurons in the brains and the spinal cord (central nervous system, CNS) allowed the increase of the interaction complexity between these animals and the environment. Receptor (afferent conduction) and efferent (motor, regulatory and behavioral reactions) functions come out more sophisticated in chordates due to the presence of more well-developed neural networks. These features have been preserved by evolution as they provide adaptive advantage to their owners.

Description : The tubular and dorsal nervous system of chordates is related to the cephalization in these animals and to bilateral symmetry. The presence of neural integrating centers with concentration of ... These features have been preserved by evolution as they provide adaptive advantage to their owners.

Last Answer : How can the tubular-dorsal nervous system in chordates be compared to the nervous pattern present in invertebrates?

What are the main advantages of integrating type ADCs?

Description : What are the main advantages of integrating type ADCs?

Last Answer : a. The integrating type of ADC’s do not need a sample/Hold circuit at the input. b. It is possible to transmit frequency even in noisy environment or in an isolated form.

What is integrating type converter?

Description : What is integrating type converter?

Last Answer : An ADC converter that perform conversion in an indirect manner by first changing the analog I/P signal to a linear function of time or frequency and then to a digital code is known as integrating type A/D converter.

List out some integrating type converters.

Description : List out some integrating type converters.

Last Answer : 1. Charge balancing ADC 2. Dual slope ADC

Regarding interferon: a. it is a virus specific molecules b. it acts by neutralizing exotoxin c. it enhances the histocompatibility antigen on cell surface and thereby activate the T cells d. it exerts its effect by integrating itself with the DNA of virus infected cells

Description : Regarding interferon: a. it is a virus specific molecules b. it acts by neutralizing exotoxin c. it enhances the histocompatibility antigen on cell surface and thereby activate the T cells d. it exerts its effect by integrating itself with the DNA of virus infected cells

Last Answer : it enhances the histocompatibility antigen on cell surface and thereby activate the T cells

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

Destruction of the anterior horn cells of the spinal cord would result in loss of (a) commissural impulses (b) integrating impulses (c) sensory impulses (d) voluntary motor impulses

Description : Destruction of the anterior horn cells of the spinal cord would result in loss of (a) commissural impulses (b) integrating impulses (c) sensory impulses (d) voluntary motor impulses

Last Answer : (d) voluntary motor impulses.

Ansoff's matrix is useful for what? A. Integrating a business's marketing strategy with general strategic direction B. Establishing an editorial calendar for staff to follow C. Understanding buyer personas and buyer behaviour D. Hiring new staff and training them on marketing tactics

Description : Ansoff's matrix is useful for what? A. Integrating a business's marketing strategy with general strategic direction B. Establishing an editorial calendar for staff to follow C. Understanding buyer personas and buyer behaviour D. Hiring new staff and training them on marketing tactics

Last Answer : Integrating a business's marketing strategy with general strategic direction

Strategic Management focusses on integrating functions such as Marketing, Finance / Accounting, Production / Operations, R & D and Info.Systems to achieve Orgnl. success

Description : Strategic Management focusses on integrating functions such as Marketing, Finance / Accounting, Production / Operations, R & D and Info.Systems to achieve Orgnl. success

Last Answer : True

Ansoff's matrix is useful for what? A. Integrating a business's marketing strategy with general strategic direction B. Establishing an editorial calendar for staff to follow C. Understanding buyer personas and buyer behaviour D. Hiring new staff and training them on marketing tactics

Description : Ansoff's matrix is useful for what? A. Integrating a business's marketing strategy with general strategic direction B. Establishing an editorial calendar for staff to follow C. Understanding buyer personas and buyer behaviour D. Hiring new staff and training them on marketing tactics

Last Answer : Integrating a business's marketing strategy with general strategic direction

__________ is responsible for hamper the search rankings. a. Connecting to your own website from any random website. b. Utilizing the same colors of texts as that of your background pages. c. Integrating page templates into your page template. d. None of the above

Description : __________ is responsible for hamper the search rankings. a. Connecting to your own website from any random website. b. Utilizing the same colors of texts as that of your background pages. c. Integrating page templates into your page template. d. None of the above

Last Answer : b. Utilizing the same colors of texts as that of your background pages.

A recording type rain gauge (A) Produces a mass curve of rain fall (B) Records the cumulative rain (C) Is sometimes called integrating rain gauge or continuous rain gauge (D) All the above

Description : A recording type rain gauge (A) Produces a mass curve of rain fall (B) Records the cumulative rain (C) Is sometimes called integrating rain gauge or continuous rain gauge (D) All the above

Last Answer : Answer: Option D