For contacting a highly soluble gas with a liquid (A) Bubble the gas through liquid (B) Spray the liquid on gas stream (C) Either (A) or (B) would suffice (D) None of these

For contacting a highly soluble gas with a liquid
(A) Bubble the gas through liquid
(B) Spray the liquid on gas stream
(C) Either (A) or (B) would suffice
(D) None of these
by

1 Answer

Answer :

(A) Bubble the gas through liquid
by

Related questions

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Description : Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Last Answer : (D) Bubble cap tower

Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Description : Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Last Answer : (D) Wetted wall column

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Description : Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Last Answer : (C) A pure substance

Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Description : Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Last Answer : (D) Spray towers

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is(A) 100(B) 10(C) 5(D) 1.

Description : The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is. (A) 100 (B) 10 (C) 5 (D) 1

Last Answer : (B) 10

Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Description : Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Last Answer : (B) More than

The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at (A) Every point of the bubble (B) Either end of the bubble (C) The mid-point of the bubble (D) No where

Description : The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at  (A) Every point of the bubble  (B) Either end of the bubble  (C) The mid-point of the bubble  (D) No where

Last Answer : (C) The mid-point of the bubble 

Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Description : Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Last Answer : (D) Wetted wall

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides(D) All (A), (B) & (C)

Description : Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point

In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Description : In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Last Answer : (C) Allowable gas and liquid velocities

__________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Description : __________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Last Answer : (A) Packed

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation temperature of the liquid (C) Heat transfer from the surface of the liquid is less than that in film boiling (D) The temperature is less than that of film boiling

Description : Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation ... less than that in film boiling (D) The temperature is less than that of film boiling

Last Answer : (D) The temperature is less than that of film boiling

Do I need Windows 8 Pro or will Windows 8 suffice?

Description : Do I need Windows 8 Pro or will Windows 8 suffice?

Last Answer : answer:Are you going to use “Media Center” ( a separate download ) ? If yes you need Win 8 Pro.

What monthly salary would suffice to make you happy?

Description : What monthly salary would suffice to make you happy?

Last Answer : I don't need much to survive, the trouble is, on my current monthly wage I am only just ableto pay the bills and have enough left for food and fuel etc. I wouldn't need much extra though, £200 more ... knowing that aftermy bills have been paid, I still have money to get me to the end of the month.

Do you think you shouldn't use a big word where a small one will suffice?

Description : Do you think you shouldn't use a big word where a small one will suffice?

Last Answer : My preference is to use the smallest word that will still adequately express your thought.

Choose the correct statement in relation to treatment of urinary tract infection (UTI): A. Majority of UTIs are caused by gram positive bacteria B. Smaller doses of the antimicrobial agent suffice for lower UTI C. Fluid restriction is recommended so that the antimicrobial drug gets concentrated in urine D. Most acute UTIs are treated with a combination antimicrobial regimen

Description : Choose the correct statement in relation to treatment of urinary tract infection (UTI): A. Majority of UTIs are caused by gram positive bacteria B. Smaller doses of the antimicrobial agent ... drug gets concentrated in urine D. Most acute UTIs are treated with a combination antimicrobial regimen

Last Answer : B. Smaller doses of the antimicrobial agent suffice for lower UTI

The presence of air bubble in blood stream is dangerous to life because- (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Description : The presence of air bubble in blood stream is dangerous to life because- (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Last Answer : (3) The flow of blood is obstructed Explanation: The presence of air bubble in blood, known as air embolism occludes blood vessels. The flow of blood is obstructed causing strokes, heart attacks, ... blood from reaching the target organ and cause ischemia. It can lead to heart attack and death.

The presence of air bubble in blood stream is dangerous to life because (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Description : The presence of air bubble in blood stream is dangerous to life because (1) Air combines with blood forming a complex (2) The flow of blood increases manifold (3) The flow of blood is obstructed (4) The pressure of blood increases manifold

Last Answer : The flow of blood is obstructed

1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Last Answer : (C) 0.2

The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Description : The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Last Answer : (A) Pulse column

For absorbing a sparingly soluble gas in a liquid (A) Gas side mass transfer co-efficient should be increased (B) Liquid side mass transfer co-efficient should be increased (C) Liquid side mass transfer co-efficient should be decreased (D) Mass transfer co-efficient must be kept constant

Description : For absorbing a sparingly soluble gas in a liquid (A) Gas side mass transfer co-efficient should be increased (B) Liquid side mass transfer co-efficient should be increased (C) Liquid side mass transfer co-efficient should be decreased (D) Mass transfer co-efficient must be kept constant

Last Answer : (B) Liquid side mass transfer co-efficient should be increased

For absorbing a sparingly soluble gas in a liquid, the (A) Gas side co-efficient should be increased(B) Liquid side coefficient should be increased(C) Gas side co-efficient should be decreased(D) Liquid side co-efficient should be decreased

Description : For absorbing a sparingly soluble gas in a liquid, the (A) Gas side co-efficient should be increased (B) Liquid side coefficient should be increased (C) Gas side co-efficient should be decreased (D) Liquid side co-efficient should be decreased

Last Answer : (B) Liquid side coefficient should be increased

When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Description : When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Last Answer : (B) Pure gas

Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Description : Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Last Answer : (A) Insoluble in the liquid

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Basophilic prokaryotes (a) grow and multiply in very deep marine sediments (b) occur in water containing high concentrations of barium hydroxide (c) readily grow and divide in sea water enriched in any soluble salt of barium (d) grow slowly in highly alkaline frozen lakes at high altitudes.

Description : Basophilic prokaryotes (a) grow and multiply in very deep marine sediments (b) occur in water containing high concentrations of barium hydroxide (c) readily grow and divide in sea water enriched in any soluble salt of barium (d) grow slowly in highly alkaline frozen lakes at high altitudes.

Last Answer : (a) grow and multiply in very deep marine sediments

Basophilic prokaryotes (a) grow and multiply in very deep marine sediments (b) occur in water containing high concentrations of barium hydroxide (c) readily grow and divide in sea water enriched in any soluble salt of barium (d) grow slowly in highly alkaline frozen lakes at high altitudes.

Description : Basophilic prokaryotes (a) grow and multiply in very deep marine sediments (b) occur in water containing high concentrations of barium hydroxide (c) readily grow and divide in sea water enriched in any soluble salt of barium (d) grow slowly in highly alkaline frozen lakes at high altitudes.

Last Answer : (a) grow and multiply in very deep marine sediments

Highly soluble herbicides like 2,4-D salt, Dalapon and TCA have to be avoided in which of the soil type a). Peat b). Red c). Clay d). Sandy

Description : Highly soluble herbicides like 2,4-D salt, Dalapon and TCA have to be avoided in which of the soil type a). Peat b). Red c). Clay d). Sandy

Last Answer : d). Sandy

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

5 A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination of its action: A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Description : 5 A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination ... : A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Last Answer : D. Redistribution

Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Description : Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Last Answer : A. Highly lipid soluble drugs

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination of its action: A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Description : A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination of ... : A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Last Answer : D. Redistribution

Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Description : Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Last Answer : A. Highly lipid soluble drugs

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination of its action: A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Description : A nonvolatile, highly lipid soluble drug is metabolized at a rate of 15% per hour. On intravenous injection it produces general anaesthesia for 10 min. Which process is responsible for termination of ... : A. Metabolism in liver B. Plasma protein binding C. Excretion by kidney D. Redistribution

Last Answer : D. Redistribution

Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Description : Marked redistribution is a feature of: A. Highly lipid soluble drugs B. Poorly lipid soluble drugs C. Depot preparations D. Highly plasma protein bound drugs

Last Answer : A. Highly lipid soluble drugs

If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Description : If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Last Answer : (A) L/G

In a gas-liquid absorption column, for obtaining the maximum absorption efficiency (A) Liquid stream should be distributed uniformly (B) Gas stream should be distributed uniformly (C) Both gas as well as liquid streams should be distributed uniformly (D) By passing should be completely avoided

Description : In a gas-liquid absorption column, for obtaining the maximum absorption efficiency (A) Liquid stream should be distributed uniformly (B) Gas stream should be distributed uniformly ... well as liquid streams should be distributed uniformly (D) By passing should be completely avoided

Last Answer : (C) Both gas as well as liquid streams should be distributed uniformly

Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Description : Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Last Answer : (D) None of these

In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a dilute solution requiring large preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Description : In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a ... preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)