Logic state 0 in positive logic corresponds to

Logic state 0 in positive logic corresponds to 

 1. zero voltage 2. positive voltage 3.higher voltage level 4. lower voltage level 
by

1 Answer

Answer :

Logic state 0 in positive logic corresponds to lower voltage level 

by

Related questions

In a positive logic system, logic state 1 corresponds to (A) positive voltage (B) higher voltage level (C) zero voltage level (D) lower voltage level

Description : In a positive logic system, logic state 1 corresponds to (A) positive voltage (B) higher voltage level (C) zero voltage level (D) lower voltage level

Last Answer : (B) higher voltage level We decide two voltages levels for positive digital logic. Higher voltage represents logic 1 & a lower voltage represents logic 0.

Positive logic in a logic circuit is one in which

Last Answer : Positive logic in a logic circuit is one in which logic 0 voltage level is lower than logic 1 voltage level.

When A = 0., B = 0, C = 1 then in two input logic gate we get gate

Description :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate  (A) XOR gate (B) AND gate (C) NAND gate (D) NOR gate

Last Answer :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate NAND gate

Define following terms related to logic families : (i) Noise Margin (ii) FAN-OUT (iii) Propagation delay (iv) Power dissipation

Description : Define following terms related to logic families : (i) Noise Margin (ii) FAN-OUT (iii) Propagation delay (iv) Power dissipation

Last Answer : i) Noise immunity is measured in terms of noise margin. High state Noise margin = VNH = VOH(min) - VIH(min) Low state Noise margin = VNL = VIL(max) - VOL(max) i) The fan-out is defined as the ... logical 0 state (HIGH to LOW) iii) Average power dissipation is defined as PD(avg) = ICC(avg) * VCC

Which one of the following logic circuit has the highest speed as compared to the currently available logic

Description : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

Last Answer : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

The current mode logic (CML) is same as

Description : The current mode logic (CML) is same as A) LSI B) CMOS C) TTL D) ECL

Last Answer : The current mode logic (CML) is same as ECL

The following logic families have their propagation delay. Arrange them from lowest propagation delay to

Description : The following logic families have their propagation delay. Arrange them from lowest propagation delay to highest propagation delay. 1. TTL (Standard) 2. ECL 3. Low power CMOS 4. DTL (A) 2, 1, 4 and 3 (B) 2, 4, 1 and 3 (C) 4, 2, 3 and 1 (D) 1, 2, 3 and 4

Last Answer : The following logic families have their propagation delay. Arrange them from lowest propagation delay to highest propagation delay. 1. TTL (Standard) 2. ECL 3. Low power CMOS 4. DTL (A) 2, 1, 4 and 3 (B) 2, 4, 1 and 3 (C) 4, 2, 3 and 1 (D) 1, 2, 3 and 4

Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not

Description : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is correct? (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Last Answer : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is ... (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

The complete set of only those Logic Gates designated as Universal Gates is

Description : The complete set of only those Logic Gates designated as Universal Gates is  (A) NOT, OR and AND Gates (B) XNOR, NOR and NAND Gates (C) NOR and NAND Gates (D) XOR, NOR and NAND Gates

Last Answer : The complete set of only those Logic Gates designated as Universal Gates is NOR and NAND Gates

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

Which of the following circuits come under the class of sequential logic circuits ?

Description : Which of the following circuits come under the class of sequential logic circuits ?   P. Full adder   Q. Full subtractor   R. Half adder   S. JK flip   T. Counter   Select the correct answer from the codes given below: (a) P and Q (b) Q and R (c) R and S (d) S and T

Last Answer : Which of the following circuits come under the class of sequential logic circuits ?   P. Full adder   Q. Full subtractor   R. Half adder   S. JK flip   T. Counter   Select the correct answer from the codes given below: (a) P and Q (b) Q and R (c) R and S (d) S and T

What is not true in the context of “Don’t Care Condition” in digital logic ?

Description : What is not true in the context of “Don’t Care Condition” in digital logic ? (A) It corresponds to combination of logic variables whose value is not defined (B) It can be assumed to be 0 or 1 (C) It can be assumed to be 1 only (D) It helps in simplification of logic function

Last Answer : What is not true in the context of “Don’t Care Condition” in digital logic ? (A) It corresponds to combination of logic variables whose value is not defined (B) It can be assumed to be 0 or 1 (C) It can be assumed to be 1 only (D) It helps in simplification of logic function

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Among the logic families, the family which can be used at very high ...

Description : Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is

Last Answer : Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is ECL.

A NAND gate is called a universal logic element because

Last Answer : A NAND gate is called a universal logic element because any logic function can be realized by NAND gates alone.

In a positive edge triggered JK flip-flop, J = 1, K = 0 and clock pulse is rising, Q will be

Description : In a positive edge triggered JK flip-flop, J = 1, K = 0 and clock pulse is rising, Q will be (a) 0 (b) 1 (c) showing no change (d) toggle 

Last Answer : In a positive edge triggered JK flip-flop, J =1, K= 0 and clock pulse is rising, a Q will be 1

The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Description : The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Last Answer : (C) Tangential to the equilibrium curve

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is equality of (A) Concentrations (B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Description : In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is ... B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Last Answer : (A) Concentrations

Logic is a ------------ science A) Positive B) Normative C) Descriptive D) Natural.

Description : Logic is a ------------ science A) Positive B) Normative C) Descriptive D) Natural. 

Last Answer :  B) Normative

How do you get part of a url that corresponds only to the Google image that's picked?

Description : How do you get part of a url that corresponds only to the Google image that's picked?

Last Answer : answer:Is the following an example of what you're asking about: http://ell.h-cdn.co/assets/16/01/480x720/wraps-hh-essentials-premium-jersey-wrap-sapphire-2_1.jpg ? If so, then: hijab > images > ... in your details is for the image's location at Google's image page, and not for the image itself.

Which one of the candidates corresponds with Jim Jones?

Description : Which one of the candidates corresponds with Jim Jones?

Last Answer : Hahaha….both

Which snow type corresponds with the kind that looks like small white couscous?

Description : Which snow type corresponds with the kind that looks like small white couscous?

Last Answer : Graupel.

what- CDE .... which angle corresponds to D?

Description : what- CDE .... which angle corresponds to D?

Last Answer : L

Which of the following equations corresponds to the enthalpy of combustion at `298K`?

Description : Which of the following equations corresponds to the enthalpy of combustion at `298K`?

Last Answer : Which of the following equations corresponds to the enthalpy of combustion at `298K`? A. `C_(2)H_(6)(g)+7//2O_(2 ... (2)(g)rarr 4CO_(2)(g)+6H_(2)O(l)`

Which of the following corresponds to the configuration `1s^(2)2s^(2)2p^(6)3s^(2)3p^(6)` ?

Description : Which of the following corresponds to the configuration `1s^(2)2s^(2)2p^(6)3s^(2)3p^(6)` ?

Last Answer : Which of the following corresponds to the configuration `1s^(2)2s^(2)2p^(6)3s^(2)3p^(6)` ? A. He B. Na C. Mg D. Ar

In what way do these atoms corresponds and in what way do they differin terms of their mass numbers?

Description : In what way do these atoms corresponds and in what way do they differin terms of their mass numbers?

Last Answer : Need answer

What z value corresponds to a confidnece level of 86?

Description : What z value corresponds to a confidnece level of 86?

Last Answer : The value for a one-sided confidence interval of 86% is 1.08

What astronomical event corresponds of one month?

Description : What astronomical event corresponds of one month?

Last Answer : The month is related to the revolution motion of the Moon.

Which of the following statement(s) is/are true concerning O2 venous saturation monitoring? a. The normal saturation of mixed venous blood is 50% b. Mixed venous blood obtained for saturation monitoring can be obtained from any peripheral vein c. If arterial blood is fully saturated, the saturation of mixed venous blood is 80% d. In less than fully saturated blood, the difference between arterial and venous saturation corresponds to oxygen extraction

Description : Which of the following statement(s) is/are true concerning O2 venous saturation monitoring? a. The normal saturation of mixed venous blood is 50% b. Mixed venous blood obtained ... than fully saturated blood, the difference between arterial and venous saturation corresponds to oxygen extraction

Last Answer : Answer: c, d The relationship between oxygen delivery and oxygen consumption is reflected in the amount of oxygen in venous blood. Under normal circumstances, oxygen delivery is 1000 ... and venous saturation corresponds to the oxygen extraction, hence the oxygen delivery/oxygen consumption ratio

One tonrefrigeration corresponds to (a) 50 kcal/min (b) 50 kcal/kr (c) 80 kcal/min (d) 80 kcal/hr

Description : One tonrefrigeration corresponds to (a) 50 kcal/min (b) 50 kcal/kr (c) 80 kcal/min (d) 80 kcal/hr

Last Answer : Ans: a

A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Description : A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Last Answer : Ans: D

The dimension MLT⁻² corresponds to (1) force (2) work done (3) acceleration (4) velocity

Description : The dimension MLT⁻² corresponds to (1) force (2) work done (3) acceleration (4) velocity

Last Answer : (1) force

The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Description : The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Last Answer : (1) Modulus of elasticity Explanation: M Li- T-2 is the dimension of any quantity that is force per unit area such as Pressure or Stress, Young's Modulus, Bulk Modulus, Modulus of Rigidity, ... the ratio of the stress applied to a body or substance to the resulting strain within the elastic limit.

What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Description : What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Last Answer : B. 1 x 10-7W/m2

The dimensional formula ML–1T–2 corresponds to –

Description : The dimensional formula ML–1T–2 corresponds to –

Last Answer : Modulus of Elasticity

200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Description : The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Last Answer : (D) Prandtl

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

True statements about ECG include: a. the P-R interval corresponds to the duration of atrial systole b. the T-wave ends at the time of aortic valve closure c. the ST segment represents repolarization of the ventricles d. all

Description : True statements about ECG include: a. the P-R interval corresponds to the duration of atrial systole b. the T-wave ends at the time of aortic valve closure c. the ST segment represents repolarization of the ventricles d. all

Last Answer : all

Which of the following do not corresponds to 4Ps of e- marketing a) Cost b) Customer Value c) Controlling d) Communication

Description : Which of the following do not corresponds to 4Ps of e- marketing a) Cost b) Customer Value c) Controlling d) Communication

Last Answer : c) Controlling

The secondgeneration of Human rights corresponds to (a) Civil and Political Rights (b) Economic, Social and Cultural rights (c) Environmental Rights (d) Development Rights

Description : The secondgeneration of Human rights corresponds to (a) Civil and Political Rights (b) Economic, Social and Cultural rights (c) Environmental Rights (d) Development Rights

Last Answer : (b) Economic, Social and Cultural rights

The _______ layer corresponds to thephysical layer of the OSI model. A) section B) line C) path D) photonic

Description : The _______ layer corresponds to thephysical layer of the OSI model. A) section B) line C) path D) photonic

Last Answer : section

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Description : The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Last Answer : c.application layer

The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Last Answer : Finding the MAC address that corresponds to an IP address

Noise level heard inside a bus in busy city traffic or inside a sub-way train corresponds to about __________ decibels. (A) 75 (B) 95 (C) 120 (D) 140

Description : Noise level heard inside a bus in busy city traffic or inside a sub-way train corresponds to about __________ decibels. (A) 75 (B) 95 (C) 120 (D) 140

Last Answer : (B) 95

Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels. (A) 90 (B) 120 (C) 150 (D) 180

Description : Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels. (A) 90 (B) 120 (C) 150 (D) 180

Last Answer : (B) 120

Shouting by a man at his full voice corresponds to a voice level of about __________ decibels. (A) 25 (B) 50 (C) 80 (D) 120

Description : Shouting by a man at his full voice corresponds to a voice level of about __________ decibels. (A) 25 (B) 50 (C) 80 (D) 120

Last Answer : (C) 80

Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Description : Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Last Answer : (C) 40