What is not true in the context of “Don’t Care Condition” in digital logic ?

What is not true in the context of “Don’t Care Condition” in digital logic ?

(A) It corresponds to combination of logic variables whose value is not defined

(B) It can be assumed to be 0 or 1

(C) It can be assumed to be 1 only

(D) It helps in simplification of logic function
by

1 Answer

Answer :

What is not true in the context of “Don’t Care Condition” in digital logic ?

(A) It corresponds to combination of logic variables whose value is not defined

(B) It can be assumed to be 0 or 1

(C) It can be assumed to be 1 only

(D) It helps in simplification of logic function

by

Related questions

Define following terms related to logic families : (i) Noise Margin (ii) FAN-OUT (iii) Propagation delay (iv) Power dissipation

Description : Define following terms related to logic families : (i) Noise Margin (ii) FAN-OUT (iii) Propagation delay (iv) Power dissipation

Last Answer : i) Noise immunity is measured in terms of noise margin. High state Noise margin = VNH = VOH(min) - VIH(min) Low state Noise margin = VNL = VIL(max) - VOL(max) i) The fan-out is defined as the ... logical 0 state (HIGH to LOW) iii) Average power dissipation is defined as PD(avg) = ICC(avg) * VCC

Which one of the following logic circuit has the highest speed as compared to the currently available logic

Description : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

Last Answer : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

The current mode logic (CML) is same as

Description : The current mode logic (CML) is same as A) LSI B) CMOS C) TTL D) ECL

Last Answer : The current mode logic (CML) is same as ECL

The following logic families have their propagation delay. Arrange them from lowest propagation delay to

Description : The following logic families have their propagation delay. Arrange them from lowest propagation delay to highest propagation delay. 1. TTL (Standard) 2. ECL 3. Low power CMOS 4. DTL (A) 2, 1, 4 and 3 (B) 2, 4, 1 and 3 (C) 4, 2, 3 and 1 (D) 1, 2, 3 and 4

Last Answer : The following logic families have their propagation delay. Arrange them from lowest propagation delay to highest propagation delay. 1. TTL (Standard) 2. ECL 3. Low power CMOS 4. DTL (A) 2, 1, 4 and 3 (B) 2, 4, 1 and 3 (C) 4, 2, 3 and 1 (D) 1, 2, 3 and 4

Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not

Description : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is correct? (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Last Answer : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is ... (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

The complete set of only those Logic Gates designated as Universal Gates is

Description : The complete set of only those Logic Gates designated as Universal Gates is  (A) NOT, OR and AND Gates (B) XNOR, NOR and NAND Gates (C) NOR and NAND Gates (D) XOR, NOR and NAND Gates

Last Answer : The complete set of only those Logic Gates designated as Universal Gates is NOR and NAND Gates

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

When A = 0., B = 0, C = 1 then in two input logic gate we get gate

Description :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate  (A) XOR gate (B) AND gate (C) NAND gate (D) NOR gate

Last Answer :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate NAND gate

Logic state 0 in positive logic corresponds to

Description : Logic state 0 in positive logic corresponds to   1. zero voltage 2. positive voltage 3.higher voltage level 4. lower voltage level 

Last Answer : Logic state 0 in positive logic corresponds to lower voltage level 

Which of the following circuits come under the class of sequential logic circuits ?

Description : Which of the following circuits come under the class of sequential logic circuits ?   P. Full adder   Q. Full subtractor   R. Half adder   S. JK flip   T. Counter   Select the correct answer from the codes given below: (a) P and Q (b) Q and R (c) R and S (d) S and T

Last Answer : Which of the following circuits come under the class of sequential logic circuits ?   P. Full adder   Q. Full subtractor   R. Half adder   S. JK flip   T. Counter   Select the correct answer from the codes given below: (a) P and Q (b) Q and R (c) R and S (d) S and T

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Among the logic families, the family which can be used at very high ...

Description : Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is

Last Answer : Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is ECL.

Positive logic in a logic circuit is one in which

Last Answer : Positive logic in a logic circuit is one in which logic 0 voltage level is lower than logic 1 voltage level.

A NAND gate is called a universal logic element because

Last Answer : A NAND gate is called a universal logic element because any logic function can be realized by NAND gates alone.

Many words have more than one meaning; we have to select the meaning which makes the most sense in context. This can be resolved by ____________ a) Fuzzy Logic b) Word Sense Disambiguation c) Shallow Semantic Analysis d) All of the mentioned

Description : Many words have more than one meaning; we have to select the meaning which makes the most sense in context. This can be resolved by ____________ a) Fuzzy Logic b) Word Sense Disambiguation c) Shallow Semantic Analysis d) All of the mentioned

Last Answer : b) Word Sense Disambiguation

The number of comparators required in a 3-bit comparator type analog to digital converter is

Description : The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8 

Last Answer : Number of comparators =2^n -1= 2^3 -1=7

Which of the following voltage is used represent binary '1' in digital circuits .

Description : Which of the following voltage is used represent binary '1' in digital circuits .   1.0 V 2. 15 V 3. +5 V 4. 25 V 

Last Answer : Which of the following voltage is used represent binary '1' in digital circuits .   1.0 V 2. 15 V 3. +5 V 4. 25 V 

Digital computers are more widely used as compared to analog computers, because they are

Last Answer : Digital computers are more widely used as compared to analog computers, because they are useful over wider ranges of problem types.

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

ECL is the fastest of all logic families. High Speed in ECL is possible because transistors are used in difference amplifier configuration, in which they are never driven into ............... (1) Race condition (2) Saturation (3) Delay (4) High impedance

Description : ECL is the fastest of all logic families. High Speed in ECL is possible because transistors are used in difference amplifier configuration, in which they are never driven into ............... (1) Race condition (2) Saturation (3) Delay (4) High impedance

Last Answer : Answer: 2  Explanation: Emitter-coupled logic (ECL) is the fastest of all logic families and therefore is used in applications where very high speed is essential. High speeds have become ... configuration, in which they are never driven into saturation and thereby the storage time is eliminated.

Which of the following “awareness contexts” is characterized by the patient, the family, and the health care professionals being aware that the patient is dying but all pretend otherwise? a) Mutual pretense awareness In mutual pretense awareness, the patient, the family and the health care professionals are aware that the patient is dying but all pretend otherwise. b) Closed awareness In closed awareness, the patient is unaware of his terminality in a context where others are aware. c) Suspected awareness In suspected awareness, the patient suspects what others know and attempts to find it out. d) Open awareness In open awareness, all are aware that the patient is dying and are able to openly acknowledge that reality.

Description : Which of the following awareness contexts is characterized by the patient, the family, and the health care professionals being aware that the patient is dying but all pretend otherwise? a) Mutual ... , all are aware that the patient is dying and are able to openly acknowledge that reality.

Last Answer : a) Mutual pretense awareness In mutual pretense awareness, the patient, the family and the health care professionals are aware that the patient is dying but all pretend otherwise.

What is meant by Logic Level of Digital Signal ?

Description : What is meant by Logic Level of Digital Signal ?

Last Answer : The voltage used to indicate binary '1' and '0' is called logic level.

What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Description : What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Last Answer : Answer: A

One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all inputs and test for a logic '1' at the output C. open all inputs and test for a logic '0' at the output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Description : One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all ... output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Last Answer : Answer: A

In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Description : In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Last Answer : a. Digital system

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

What are the basic digital logic gates?

Description : What are the basic digital logic gates?

Last Answer : The three basic logic gates are • AND gate • OR gate • NOT gate

The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Description : The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Last Answer : Ans: A The digital logic family which has the lowest propagation delay time is ECL (Lowest propagation delay time is possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated).

The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Description : The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Last Answer : (D) CMOS The digital logic family which has minimum power dissipation is CMOS. (CMOS being an unipolar logic family, occupy a very small fraction of silicon Chip area)

A single transistor can be used to build which of the following digital logic gates : -

Description : A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates

Last Answer : a

If you oppose this bill then you do not care about public safety. This is an example of . conclusive logic circular reasoning an eitheror argument?

Description : If you oppose this bill then you do not care about public safety. This is an example of . conclusive logic circular reasoning an eitheror argument?

Last Answer : Need answer

Which of the following statement is not true? a) The union and concatenation of two context-free languages is context-free b) The reverse of a context-free language is context-free, but the complement need not be c) Every regular language is context-free because it can be described by a regular grammar d) The intersection two context-free languages is context-free

Description : Which of the following statement is not true? a) The union and concatenation of two context-free languages is context-free b) The reverse of a context-free language is context-free, but the ... it can be described by a regular grammar d) The intersection two context-free languages is context-free

Last Answer : d) The intersection two context-free languages is context-free

Which of the following statement is true? a) Not all formal languages are context-free b) All formal languages are Context free c) All formal languages are like natural language d) Natural languages are context-oriented free

Description : Which of the following statement is true? a) Not all formal languages are context-free b) All formal languages are Context free c) All formal languages are like natural language d) Natural languages are context-oriented free

Last Answer : a) Not all formal languages are context-free

One of the key indicators for any organisation to leverage the Internet deals with its adaptability to change  Is a True Statement  Is a FALSE statement  Depends on the business context  Depends upon the prevailing competition

Description : One of the key indicators for any organisation to leverage the Internet deals with its adaptability to change  Is a True Statement  Is a FALSE statement  Depends on the business context  Depends upon the prevailing competition

Last Answer :  Is a True Statement

Which of the following statement is not true? a) The union and concatenation of two context-free languages is context-free b) The reverse of a context-free language is context-free, but the complement need not be c) Every regular language is context-free because it can be described by a regular grammar d) The intersection of a context-free language and a regular language is always context-free e) The intersection two context-free languages is context-free

Description : Which of the following statement is not true? a) The union and concatenation of two context-free languages is context-free b) The reverse of a context-free language is context-free, but ... a regular language is always context-free e) The intersection two context-free languages is context-free

Last Answer : e) The intersection two context-free languages is context-free

Which of the following statement is true? a) Not all formal languages are context-free b) All formal languages are Context free c) All formal languages are like natural language d) Natural languages are context-oriented free e) Natural language is formal

Description : Which of the following statement is true? a) Not all formal languages are context-free b) All formal languages are Context free c) All formal languages are like natural language d) Natural languages are context-oriented free e) Natural language is formal

Last Answer : a) Not all formal languages are context-free

Statement (A). In the context of globalisation, the most important challenge facing India is to boost exports. Reason (R). It may increase the country's growth rate. A. Both (A) and (R) are true and (R) is the correct explanation of (A). B. Both (A) and (R) are true and (R) is the uncorrect explanation of (A). C. (A) is true but (R) is false. D. (A) is false but (R) is true.

Description : Statement (A). In the context of globalisation, the most important challenge facing India is to boost exports. Reason (R). It may increase the country's growth rate. A. Both (A) and (R) are true and (R) is the correct ... (A). C. (A) is true but (R) is false. D. (A) is false but (R) is true.

Last Answer : A). B. Both (A) and (R) are true and

In context of net operating profit, which of the following statements are true? A. If all costs are variable, the amount of profit obtained in marginal costing and absorption costing will be same. B. If the volume of sales and output is equal in a period, profit will be same in absorption costing and marginal costing. C. Both a and b D. None of the above

Description : In context of net operating profit, which of the following statements are true? A. If all costs are variable, the amount of profit obtained in marginal costing and absorption costing will be same. B. If ... same in absorption costing and marginal costing. C. Both a and b D. None of the above

Last Answer : C. Both a and b

In the context of requirements analysis, partitioning results in the elaboration of data, function, or behavior. (A) True (B) False

Description : In the context of requirements analysis, partitioning results in the elaboration of data, function, or behavior. (A) True (B) False

Last Answer : (A) True

The teacher has been glorified by the phrase 'Friend, Philosopher and Guide' because Options: A) He has to play all these vital roles in context of the society B) He transfuses the high values of the humanity into young ones sitting in the class-room C) He is the great reformer and patriotic saviour of a nation D) All the above statements are true

Description : The teacher has been glorified by the phrase 'Friend, Philosopher and Guide' because Options: A) He has to play all these vital roles in context of the society B) He transfuses the high values ... ) He is the great reformer and patriotic saviour of a nation D) All the above statements are true

Last Answer : He transfuses the high values of the humanity into young ones sitting in the class-room

Select the code, which is not correct in the context of deductive argument with two premises: (A) An argument with one true premise, one false premise and a false conclusion may be valid. (B) An argument with two true premises and a false conclusion may be valid. (C) An argument with one true premise, one false premise and a true conclusion may be valid. (D) An argument with two false premises and a false conclusion may be valid.

Description : Select the code, which is not correct in the context of deductive argument with two premises: (A) An argument with one true premise, one false premise and a false conclusion may be valid. (B) An argument ... may be valid. (D) An argument with two false premises and a false conclusion may be valid. 

Last Answer : (B) An argument with two true premises and a false conclusion may be valid. 

Which of the following statements is true in the context of the testing of a hypothesis? (A) It is only the alternative hypothesis, that can be tested. (B) It is only the null hypothesis, that can be tested. (C) Both, the alternative and the null hypotheses can be tested. (D) Both, the alternative and the null hypotheses cannot be tested.

Description : Which of the following statements is true in the context of the testing of a hypothesis? (A) It is only the alternative hypothesis, that can be tested. (B) It is only the null hypothesis, ... the null hypotheses can be tested. (D) Both, the alternative and the null hypotheses cannot be tested.

Last Answer : (B) It is only the null hypothesis, that can be tested.

Which of the following statements is not true in the context of participatory research ? (A) It recognizes knowledge as power. (B) It emphasises on people as experts. (C) It is a collective process of enquiry. (D) Its sole purpose is production of knowledge.

Description : Which of the following statements is not true in the context of participatory research ? (A) It recognizes knowledge as power. (B) It emphasises on people as experts. (C) It is a collective process of enquiry. (D) Its sole purpose is production of knowledge.

Last Answer : (D) Its sole purpose is production of knowledge.

Which one of the following statements is correct in the context of multiple - choice type questions? (A) They are more objective than true-false type questions. (B) They are less objective than essay type questions. (C) They are more subjective than short-answer type questions. (D) They are more subjective than true-false type questions.

Description : Which one of the following statements is correct in the context of multiple - choice type questions? (A) They are more objective than true-false type questions. (B) They are less objective ... than short-answer type questions. (D) They are more subjective than true-false type questions.

Last Answer : (A) They are more objective than true-false type questions.

Given the following statements : S1 : SLR uses follow information to guide reductions. In case of LR and LALR parsers, the look-aheads are associated with the items and they make use of the left context available to the parser. S2 : LR grammar is a larger sub-class of context free grammar as compared to that SLR and LALR grammars. Which of the following is true ? (A) S1 is not correct and S2 is not correct. (B) S1 is not correct and S2 is correct. (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Description : Given the following statements : S1 : SLR uses follow information to guide reductions. In case of LR and LALR parsers, the look-aheads are associated with the items and they make use of the left context available to ... (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Last Answer : (D) S1 is correct and S2 is correct.

Given the following two statements: A. L = {w|na(w) = nb(w)} is deterministic context free language, but not linear B. L = {an bn} U {an b2n} is linear, but not deterministic context free language. Which of the following options is correct? (1) Both (A) and (B) are false. (2) Both (A) and (B) are true. (3) (A) is true, (B) is false. (4) (A) is false, (B) is true.

Description : Given the following two statements: A. L = {w|na(w) = nb(w)} is deterministic context free language, but not linear B. L = {an bn} U {an b2n} is linear, but not deterministic context free language. Which of the following ... are true. (3) (A) is true, (B) is false. (4) (A) is false, (B) is true.

Last Answer : Both (A) and (B) are true. 

Which of the following are true in the context of Manchester Coding Signaling ?

Description : Which of the following are true in the context of Manchester Coding Signaling ?  (A) It suppresses the DC component  (B) It suppresses the high frequency component  (C) Pulses are unit symbol wide  (D) Symbol “1” is represented by positive pulse

Last Answer : Which of the following are true in the context of Manchester Coding Signaling ?  (A) It suppresses the DC component  (B) It suppresses the high frequency component  (C) Pulses are unit symbol wide  (D) Symbol “1” is represented by positive pulse

How is an overload condition indicated by the electronic digital multimeter?

Description : How is an overload condition indicated by the electronic digital multimeter?

Last Answer : Simultaneous flashing of display readouts

List out features of any four addressing modes of 8051.

Description : List out features of any four addressing modes of 8051.

Last Answer : 1.Immediate addressing mode: In this Immediate Addressing Mode, the data is provided in the instruction itself. The data is provided immediately after the opcode. These are some examples of Immediate Addressing Mode. MOVA ... us see some examples of this mode. MOV 0E5H, @R0 MOV @R1, 80H