At what distance are dishwasher sound levels (db) measured?

At what distance are dishwasher sound levels (db) measured?
by

1 Answer

Answer :

I would think it would have to be the peak db most likely rather than the average throughout a cycle. Is there a formula for computing how sound diminishes with it’s distance from a source?
by

Related questions

At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Description : At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Last Answer : Going on memory here….3db is half the intensity. The intensity is usually inversely proportional to r squared. The rest is math, so 70–40 is 30 or ten halves.

The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Description : The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Last Answer : B. 14.5dB

ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Description : ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Last Answer : C. 0.012 W

The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Description : The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Last Answer : (2) 60 db to 80 db (decibel) Explanation: Normal speech is about 60 dB (decibels). A dangerous sound is anything that is 80 dB or higher which can lead to hearing loss. At 70 dB or ... the risk of harm to healthy ears is negligible. Listening to sound above 80 decibels can cause profound deafness.

The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Description : The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Last Answer : 60 db to 80 db (decibel)

What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Description : What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Last Answer : B. 128

The signal in a channel is measured to be 23 dB while noise in the same channel is measured to be 9 dB. The signal to noise ratio therefore is __________. A. 9/23 B. 23/9 C. 32 dB D. 14 dB

Description : The signal in a channel is measured to be 23 dB while noise in the same channel is measured to be 9 dB. The signal to noise ratio therefore is __________. A. 9/23 B. 23/9 C. 32 dB D. 14 dB

Last Answer : D. 14 dB

A signal is measured at two different points. The power is P1 at the first point and P2 at the second point. The dB is 0. This means________. A) P2 is zero B) P2 equals P1 C) P2 is much larger than P1 D) P2 is much smaller than P1

Description : A signal is measured at two different points. The power is P1 at the first point and P2 at the second point. The dB is 0. This means________. A) P2 is zero B) P2 equals P1 C) P2 is much larger than P1 D) P2 is much smaller than P1

Last Answer : P2 equals P1

The measured distance from a lens to the object is 20 cm and from the lens to the image is 5 cm. Calculate the focal length

Description : The measured distance from a lens to the object is 20 cm and from the lens to the image is 5 cm. Calculate the focal length

Last Answer : 1/4

The pitch of the sound is measured by its: (1) Intensity (2) waveform (3) Frequency (4) Loudness

Description : The pitch of the sound is measured by its: (1) Intensity (2) waveform (3) Frequency (4) Loudness

Last Answer : (3) Frequency Explanation: Pitch relates to the frequency, or how many times a second the particles vibrate. The distance between one wave and the next gives the wavelength. For sounds all travelling at the same speed, highfrequency (high-pitched) sounds have waves very close together.

What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Last Answer : C. 179dB

The approximate intensity level of the sound which can caused damage to the ear drum is _____? A. 100 dB B. 60 dB C. 160 dB D. 20 dB

Description : The approximate intensity level of the sound which can caused damage to the ear drum is _____? A. 100 dB B. 60 dB C. 160 dB D. 20 dB

Last Answer : ANSWER: A

For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Description : For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Last Answer : A. 3.2 x 10-4 W/m2

A choir consisting of 36 individuals all of whom can sing with the same intensity. A soloist sings a certain passage and then is joined by the remainder of the choir members for a repeat of the passage. What is the difference in the sound intensity level in the two cases? A. 3 dB B. 6 dB C. 36 dB D. 15.6dB

Description : A choir consisting of 36 individuals all of whom can sing with the same intensity. A soloist sings a certain passage and then is joined by the remainder of the choir members for a repeat of the passage. What is the ... sound intensity level in the two cases? A. 3 dB B. 6 dB C. 36 dB D. 15.6dB

Last Answer : D. 15.6dB

What increase in sound level is commonly perceived by most people? A. 6 to 10 dB B. 1 to 3 dB C. 3 to 6 dB D. 10 to 20dB

Description : What increase in sound level is commonly perceived by most people? A. 6 to 10 dB B. 1 to 3 dB C. 3 to 6 dB D. 10 to 20dB

Last Answer : A. 6 to 10 dB

The sound power level of a jet plane flying at a height of 1 km is 160 dB. What is the maximum sound pressure level on the ground directly below the plane assuming that the aircraft radiates sound equally in all directions? A. 59.1 dB B. 69.1 dB C. 79.1 dB D. 89.1 dB

Description : The sound power level of a jet plane flying at a height of 1 km is 160 dB. What is the maximum sound pressure level on the ground directly below the plane assuming that the aircraft radiates sound equally in all directions? A. 59.1 dB B. 69.1 dB C. 79.1 dB D. 89.1 dB

Last Answer : D. 89.1 dB

The approximate intensity level of the sound which can cause damage to the ear drum is? A. 20 dB B. 60 dB C. 100 dB (Answer) D. 160 dB

Description : The approximate intensity level of the sound which can cause damage to the ear drum is? A. 20 dB B. 60 dB C. 100 dB (Answer) D. 160 dB

Last Answer : C. 100 dB (Answer)

What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Description : What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Last Answer : b) 30-60 dB

The sound level of an agricultural tractor should not exceed : I. 110 dB J. 100 dB K. 90 dB L. 80 dB

Description : The sound level of an agricultural tractor should not exceed : I. 110 dB J. 100 dB K. 90 dB L. 80 dB

Last Answer : K. 90 dB

Sound becomes hazardous noise pollution at level a) Above 30 dB b) Above 80 dB c) Above 100 dB d) Above 120 dB.

Description : Sound becomes hazardous noise pollution at level a) Above 30 dB b) Above 80 dB c) Above 100 dB d) Above 120 dB.

Last Answer : b) Above 80 dB

Permissible noise level at Residential area during night time is : (1) 45 dB (2) 55 dB (3) 75 dB (4) 80 dB

Description : Permissible noise level at Residential area during night time is : (1) 45 dB (2) 55 dB (3) 75 dB (4) 80 dB

Last Answer : (1) 45 dB Explanation: As per the norm, the permissible noise level in residential areas is 45 db during night time, 55 db during day and in commercial areas it is 55 db during night and 65 db during day.

Permissible noise level at Residential area during night time is : (1) 45 dB (A) (2) 55 dB (A) (3) 75 dB (A) (4) 80 dB (A)

Description : Permissible noise level at Residential area during night time is : (1) 45 dB (A) (2) 55 dB (A) (3) 75 dB (A) (4) 80 dB (A)

Last Answer : 45 dB (A)

What are hdl cholesterol levels and how are they measured?

Description : What are hdl cholesterol levels and how are they measured?

Last Answer : HDL cholesterol levels are good cholesterol and the doctor measured several blood tests this cholesterol health would be maintained on 35 mg / dl in men and 40 mg / dl in women.

How Normal Cholesterol Levels Are Measured?

Description : How Normal Cholesterol Levels Are Measured?

Last Answer : One way to check for good health is to measure the amount of the various types of cholesterol in the blood. Unlike some tests, however, normal cholesterol levels are not always the same ... health risks of the higher average level of cholesterol are still the same, regardless of medical conditions.

How often should cholesterol levels be measured?

Description : How often should cholesterol levels be measured?

Last Answer : you should get your cholesterol levels checked at least every six months, if possible you should do it every four months. the normal level is below 200.

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

Glycocylated haemoglobin: a. is absent in the plasma of people without diabetes mellitus b. results from the combination of a HbA and a sugar c. when measured as HbA1c in plasma gives a more accurate retrospective estimates of blood sugar levels than other glycosylated products d. all above

Description : Glycocylated haemoglobin: a. is absent in the plasma of people without diabetes mellitus b. results from the combination of a HbA and a sugar c. when measured as HbA1c in plasma gives a more accurate retrospective estimates of blood sugar levels than other glycosylated products d. all above

Last Answer : all above

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

If a band is played on the moon the sound will - (1) reverberate (2) be heard by us faintly (3) be heard upto 10km from it (4) not be heard at any distance at all from it

Description : If a band is played on the moon the sound will - (1) reverberate (2) be heard by us faintly (3) be heard upto 10km from it (4) not be heard at any distance at all from it

Last Answer : (4) not be heard at any distance at all from it Explanation: As there is no atmosphere surrounding the moon, the sound from any band that is played there cannot travel outwards there is no material medium surrounding it for its propagation.

If a band is played on the moon the sound will - (1) reverberate (2) be heard by us faintly (3) be heard upto 10km from it (4) not be heard at any distance at all from it

Description : If a band is played on the moon the sound will - (1) reverberate (2) be heard by us faintly (3) be heard upto 10km from it (4) not be heard at any distance at all from it

Last Answer : (4) not be heard at any distance at all from it Explanation: As there is no atmosphere surrounding the moon, the sound from any band that is played there cannot travel outwards there is no material medium surrounding it for its propagation.

Ondometer is a - (1) Measuring instrument for distance covered by motor wheels (2) Measuring instrument for frequency of electromagnetic waves (3) Device for measuring sound intensity (4) Measuring instrument for electric power

Description : Ondometer is a - (1) Measuring instrument for distance covered by motor wheels (2) Measuring instrument for frequency of electromagnetic waves (3) Device for measuring sound intensity (4) Measuring instrument for electric power

Last Answer : (2) Measuring instrument for frequency of electromagnetic waves

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

Choose the correct statement about topical NSAID preparations: A. They produce high drug levels in the blood by avoiding hepatic first pass metabolism B. They produce high drug levels in the subjacent muscle and joint tissues upto a depth/distance of 10 cm from the site of application C. They elicit symptomatic relief in soft tissue rheumatism mainly by a strong placebo effect D. Interindividual variability in clinical response to these preparations is minimal

Description : Choose the correct statement about topical NSAID preparations: A. They produce high drug levels in the blood by avoiding hepatic first pass metabolism B. They produce high drug levels in ... a strong placebo effect D. Interindividual variability in clinical response to these preparations is minimal

Last Answer : C. They elicit symptomatic relief in soft tissue rheumatism mainly by a strong placebo effect

How is distance measured when there is no straight line?

Description : How is distance measured when there is no straight line?

Last Answer : answer:In my experience, saying that “It’s 10 miles to the restaurant” means that you will be traveling approximately 10 miles when to get to that restaurant if you are traveling the common route. Is this what you’re asking?

The distance is measured on the topographic map. -SST 10th

Description : The distance is measured on the topographic map. -SST 10th

Last Answer : (i) To measure the straight distance: To measure the shortest distance between two points on the topographic map along a straight line can be done easily with the help of a pair of divider . Keep the ... kilometres the answer would be 3km., 300m. If asked in metres the answer would be 3300 metres.

The distance of the planet from the earth is measured by __________.

Description : The distance of the planet from the earth is measured by __________.

Last Answer : The distance of the planet from the earth is measured by __________. (A) direct method (B) ... (C) spherometer method (D) parallax method

Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Description : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Last Answer : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a ... .284xx10^(6)m` apart is `2^(@)`.

Why is the distace between earth and the sun measured in light minutes and the distance between neptune and the sun measured in light hours?

Description : Why is the distace between earth and the sun measured in light minutes and the distance between neptune and the sun measured in light hours?

Last Answer : Because it only takes 8 minutes for sunlight to reach Earth, butit takes 4 hours to reach Neptune.

India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) longitudes are not parallel lines (b) the distance between latitudes remains the same but the distance between longitudes is greatest at the Equator and nil at the poles where all longitudes join (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Description : India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) ... (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Last Answer : Ans: (b)

Distance of stars is measured in (a) Light years (b) Kilometres per second (c) Kilometres only (d) Nautical miles

Description : Distance of stars is measured in (a) Light years (b) Kilometres per second (c) Kilometres only (d) Nautical miles

Last Answer : Ans:(b)

Pitch of coil is defined as axial distance in compressed state of the coil. a) Yes b) It is measured in uncompressed state c) It is same in uncompressed or compressed state d) None of the listed

Description : Pitch of coil is defined as axial distance in compressed state of the coil. a) Yes b) It is measured in uncompressed state c) It is same in uncompressed or compressed state d) None of the listed

Last Answer : b) It is measured in uncompressed state

Find the angle at which the potential due a dipole is measured, when the distance from one charge is 12cm and that due to other is 11cm, separated to each other by a distance of 2cm. a) 15 b) 30 c) 45 d) 60

Description : Find the angle at which the potential due a dipole is measured, when the distance from one charge is 12cm and that due to other is 11cm, separated to each other by a distance of 2cm. a) 15 b) 30 c) 45 d) 60

Last Answer : d) 60

Find the potential due to a charged ring of density 2 units with radius 2m and the point at which potential is measured is at a distance of 1m from the ring. a) 18π b) 24π c) 36π d) 72π

Description : Find the potential due to a charged ring of density 2 units with radius 2m and the point at which potential is measured is at a distance of 1m from the ring. a) 18π b) 24π c) 36π d) 72π

Last Answer : d) 72π

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

A uniform slope was measured by the method of stepping. If the difference in level between two points is 1.8 m and the slope distance between them is 15 m, the error is approximately equal to (A) Cumulative, + 0.11 m (B) Compensating, ± 0.11 m (C) Cumulative, - 0.11 m (D) None of these

Description : A uniform slope was measured by the method of stepping. If the difference in level between two points is 1.8 m and the slope distance between them is 15 m, the error is approximately equal to (A) Cumulative, + 0.11 m (B) Compensating, ± 0.11 m (C) Cumulative, - 0.11 m (D) None of these

Last Answer : (A) Cumulative, + 0.11 m

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Description : The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Last Answer : (A) Total latitude

To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The perpendicular to the desired parallel line from A and B are: (A) AB/(cot b - cot a) (B) AB/(cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Last Answer : (A) AB/(cot b - cot a)