How does a waveguide-type lens focus spherical wavefront microwave energy?

How does a waveguide-type lens focus spherical  wavefront microwave energy?
by

1 Answer

Answer :

Some wavefronts are accelerated so that all wavefronts exit the  lens at the same time
by

Related questions

What type of lens decelerates a portion of a spherical wavefront

Description : What type of lens decelerates a portion of a spherical wavefront

Last Answer : Delay lens

When a wavefront is radiated into a waveguide, what happens to the portions of the wavefront that do not satisfy the boundary conditions?

Description : When a wavefront is radiated into a waveguide, what happens to the portions of the wavefront that do not satisfy the boundary conditions?

Last Answer : Decrease to zero.

A parabolic reflector changes a spherical wavefront to what type of wavefront?

Description : A parabolic reflector changes a spherical wavefront to what type of wavefront?

Last Answer : Plane.

When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Description : When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Last Answer : Faraday Rotation Effect

“Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Description : “Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Last Answer : D. Huygen’s principle

in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

Zoningis usedwith adielectric antenna inorderto a. reduce the bulk of the lense b. increase the bandwidth of the lens c. increase pin-point focusing d. correct the curvature of the wavefront from a horn that is too short

Description : Zoningis usedwith adielectric antenna inorderto a. reduce the bulk of the lense b. increase the bandwidth of the lens c. increase pin-point focusing d. correct the curvature of the wavefront from a horn that is too short

Last Answer : a. reduce the bulk of the lense

Rotating the plane of polarization of a wavefront by passing it through a ferrite device is called what?

Description : Rotating the plane of polarization of a wavefront by passing it through a ferrite device is called what?

Last Answer : . Faraday rotation.

A wavefront undergoes a phase change as it travels along the fiber. If the wavefront transverses the fiber twice and is reflected twice and the total phase change is equal to 1/2 p, will the wavefront disappear? If yes, why?

Description : A wavefront undergoes a phase change as it travels along the fiber. If the wavefront transverses the fiber twice and is reflected twice and the total phase change is equal to 1/2 p, will the wavefront disappear? If yes, why?

Last Answer : Yes, the wavefront will disappear because the total amount of phase collected must be an integer multiple of 2 p. (If the propagating wavefronts are out of phase, they will disappear. ... interfere with the wavefronts out of phase. This type of interference is called destructive interference.)

What device can be constructed to allow microwave energy to pass in one direction but blocks energy in the other direction in a waveguide?

Description : What device can be constructed to allow microwave energy to pass in one direction but blocks energy in the other direction in a waveguide?

Last Answer : errite Isolato

Choose which of following condition is not required for a waveguide to exist. a) The dimensions should be in accordance with desired frequency b) Cut-off frequency should be minimum 6GHz c) The shape should be spherical d) No specific condition is required for waveguide design

Description : Choose which of following condition is not required for a waveguide to exist. a) The dimensions should be in accordance with desired frequency b) Cut-off frequency should be minimum 6GHz c) The shape should be spherical d) No specific condition is required for waveguide design

Last Answer : c) The shape should be spherical

Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?

Description : Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?

Last Answer : Slots and apertures.

What interaction causes energy to travel down a waveguide?

Description : What interaction causes energy to travel down a waveguide?

Last Answer : The interaction of the electric and magnetic fields.

Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Description : Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Last Answer : B. TE

The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Description : The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Last Answer : B. Shorten waveguide link

Waveguide are used mainly for microwave signals because

Last Answer : Waveguide are used mainly for microwave signals because They would be too bulky at lower frequencies.

What is the most common type of waveguide joint?

Description : What is the most common type of waveguide joint?

Last Answer : Choke joint.

The large surface area of a waveguide greatly reduces what type of loss that is common in two-wire and coaxial lines?

Description : The large surface area of a waveguide greatly reduces what type of loss that is common in two-wire and coaxial lines?

Last Answer : Copper loss.

What is the most likely cause of losses in waveguide systems?

Description : What is the most likely cause of losses in waveguide systems?

Last Answer : Improperly connected joints or damaged inner surface.

A waveguide bend must have what minimum radius?

Description : A waveguide bend must have what minimum radius?

Last Answer : Greater than 2 wavelengths.

What is the result of an abrupt change in the size, shape, or dielectric of a waveguide?

Description : What is the result of an abrupt change in the size, shape, or dielectric of a waveguide?

Last Answer : Reflections.

When a waveguide is terminated in a resistive load, the load must be matched to what property of the waveguide?

Description : When a waveguide is terminated in a resistive load, the load must be matched to what property of the waveguide?

Last Answer : . Characteristic impedance.

What device is used to produce a gradual change in impedance at the end of a waveguide?

Description : What device is used to produce a gradual change in impedance at the end of a waveguide?

Last Answer : Horn.

What is the result of an impedance mismatch in a waveguide?

Description : What is the result of an impedance mismatch in a waveguide?

Last Answer : Standing waves that cause power losses, a reduction in power handling capability, and an increase in frequency and sensitivity.

What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Last Answer : Size and shape

Which subscript, in circular waveguide classification, indicates the number of full-wave patterns around the circumference?

Description : Which subscript, in circular waveguide classification, indicates the number of full-wave patterns around the circumference?

Last Answer : First.

The electric field is perpendicular to the "a" dimension of a waveguide in what mode?

Description : The electric field is perpendicular to the "a" dimension of a waveguide in what mode?

Last Answer : TE.

How is the cutoff wavelength of a circular waveguide figured?

Description : How is the cutoff wavelength of a circular waveguide figured?

Last Answer : 1.71 times the diameter.

What field configuration is easiest to produce in a given waveguide?

Description : What field configuration is easiest to produce in a given waveguide?

Last Answer : . Dominant mode

What term is used to identify the forward progress velocity of wavefronts in a waveguide?

Description : What term is used to identify the forward progress velocity of wavefronts in a waveguide?

Last Answer : Group velocity.

incidence and reflection that are perpendicular to the waveguide walls?

Description : incidence and reflection that are perpendicular to the waveguide walls?

Last Answer : Cutoff frequency.

Assuming the wall of a waveguide is perfectly flat, what is the angular relationship between the angle of incidence and the angle of reflection

Description : Assuming the wall of a waveguide is perfectly flat, what is the angular relationship between the angle of incidence and the angle of reflection

Last Answer : The angles are equal.

When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Last Answer : Energy will no longer pass through the waveguide.

What happens to the bus bar dimensions of the waveguide when the frequency is increased?

Description : What happens to the bus bar dimensions of the waveguide when the frequency is increased?

Last Answer : The bus bar becomes wider.

The frequency range of a waveguide is determined by what dimensions?

Description : The frequency range of a waveguide is determined by what dimensions?

Last Answer : . The "a" dimension.

The folded waveguide in a bwo serves the same purpose as what component in a twt?

Description : The folded waveguide in a bwo serves the same purpose as what component in a twt?

Last Answer : Helix.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.

What is the main focus of spherical mirror ?

Description : What is the main focus of spherical mirror ?

Last Answer : : The point at which the rays of light parallel to the main axis of the spherical mirror meet at the point above the main axis (in the concave mirror) or appear to be moving away from the point above the main axis (in the convex mirror) is called the main focus of the spherical mirror.

The centre of the reflecting surface of a spherical mirror is called the : (1) Radius (2) Centre of Curvature (3) Pole (4) Focus

Description : The centre of the reflecting surface of a spherical mirror is called the : (1) Radius (2) Centre of Curvature (3) Pole (4) Focus

Last Answer : (3) Pole Explanation: The center of the reflecting surface of a spherical mirron is called as the pole of the mirror which is mainly known as the center of curvature.

147 A ray directed towards the centre of curvature of a spherical mirror a) become parallel to principal axis b)retraces its path c)appears to diverge from focus d)passes through focus.

Description : 147 A ray directed towards the centre of curvature of a spherical mirror a) become parallel to principal axis b)retraces its path c)appears to diverge from focus d)passes through focus.

Last Answer : b)retraces its path

4. A spherical mirror and a thin spherical lens have a focal length of -15 cm. The mirror and the lens are likely to be -Physics-10

Description : 4. A spherical mirror and a thin spherical lens have a focal length of -15 cm. The mirror and the lens are likely to be -Physics-10

Last Answer : (a) Both are likely to be concave.

During accommodation for near: a. the spherical aberration of the eye increases b. the ciliary muscle relaxes c. the field of vision decreases d. the amount of light entering the eye increases e. the thickness of the lens increases

Description : During accommodation for near: a. the spherical aberration of the eye increases b. the ciliary muscle relaxes c. the field of vision decreases d. the amount of light entering the eye increases e. the thickness of the lens increases

Last Answer : the thickness of the lens increases

With respect to lens development: a. the lens first appears at 27 days of gestation b. it is formed from neural crest cells c. the lens first appears as a vesicles with a single layer of epithelial cells d. Y suture is absent in the embryonic nucleus e. the adult lens is more spherical than the foetal

Description : With respect to lens development: a. the lens first appears at 27 days of gestation b. it is formed from neural crest cells c. the lens first appears as a vesicles with a single layer of ... d. Y suture is absent in the embryonic nucleus e. the adult lens is more spherical than the foetal

Last Answer : the lens first appears at 27 days of gestation

A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic (A) Spherical aberration (B) Chromatic aberration (C) Coma (D) Astigmatism

Description : A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic (A) Spherical aberration (B) Chromatic aberration (C) Coma (D) Astigmatism

Last Answer : (A) Spherical aberration

The defect of a lens whereby rays of white light proceeding from a point get dispersed into their components and conveyed to various foci, forming a blurred and coloured image is known as (A) Chromatic aberration (B) Spherical aberration (C) Astigmatism (D) Coma

Description : The defect of a lens whereby rays of white light proceeding from a point get dispersed into their components and conveyed to various foci, forming a blurred and coloured image is known as (A) Chromatic aberration (B) Spherical aberration (C) Astigmatism (D) Coma

Last Answer : (A) Chromatic aberration

Pick up the correct statement from the following: (A) Spherical aberration may be reduced by diminishing the aperture (B) Spherical aberration may be minimised by replacing the single lens by a combination of the lenses (C) In telescope objectives, a combination of convex lens and concave lens is used (D) All the above

Description : Pick up the correct statement from the following: (A) Spherical aberration may be reduced by diminishing the aperture (B) Spherical aberration may be minimised by replacing the single lens by a ... telescope objectives, a combination of convex lens and concave lens is used (D) All the above

Last Answer : (D) All the above

What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

Whose principle or law states that each point on a wavefront may be considered a new wave source? Is it: w) Snell's Law x) Huygen's Principle y) Young's Law z) Hertz's Law.

Description : Whose principle or law states that each point on a wavefront may be considered a new wave source? Is it: w) Snell's Law x) Huygen's Principle y) Young's Law z) Hertz's Law.

Last Answer : ANSWER: X -- HUYGEN'S PRINCIPLE

Camera and Lens aperature and focus speed for a nature shot?

Description : Camera and Lens aperature and focus speed for a nature shot?

Last Answer : answer:Not enough info. What kind of equipment do you have? Not knowing anything else you want a fast shutter speed and fast lens.

If I'm using a manual focus lens, does my far-sightedness mean that my pictures will be out of focus?

Description : If I'm using a manual focus lens, does my far-sightedness mean that my pictures will be out of focus?

Last Answer : Just focus it until it’s as clear as it can be—it’s the best you can do.