Description : A waveguide passive component that brings a smooth change in the direction of axis maintained perpendicular to the plane of polarization? A. L bend B. H bend C. T bend D. X bend
Last Answer : B. H bend
Description : When a waveguide is terminated in a resistive load, the load must be matched to what property of the waveguide?
Last Answer : . Characteristic impedance.
Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above
Last Answer : Answer: Option D
Description : What is the most likely cause of losses in waveguide systems?
Last Answer : Improperly connected joints or damaged inner surface.
Description : What is the most common type of waveguide joint?
Last Answer : Choke joint.
Description : What is the result of an abrupt change in the size, shape, or dielectric of a waveguide?
Last Answer : Reflections.
Description : What device is used to produce a gradual change in impedance at the end of a waveguide?
Last Answer : Horn.
Description : What is the result of an impedance mismatch in a waveguide?
Last Answer : Standing waves that cause power losses, a reduction in power handling capability, and an increase in frequency and sensitivity.
Description : Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?
Last Answer : Slots and apertures.
Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?
Last Answer : Size and shape
Description : Which subscript, in circular waveguide classification, indicates the number of full-wave patterns around the circumference?
Last Answer : First.
Description : The electric field is perpendicular to the "a" dimension of a waveguide in what mode?
Last Answer : TE.
Description : How is the cutoff wavelength of a circular waveguide figured?
Last Answer : 1.71 times the diameter.
Description : What field configuration is easiest to produce in a given waveguide?
Last Answer : . Dominant mode
Description : What term is used to identify the forward progress velocity of wavefronts in a waveguide?
Last Answer : Group velocity.
Description : incidence and reflection that are perpendicular to the waveguide walls?
Last Answer : Cutoff frequency.
Description : Assuming the wall of a waveguide is perfectly flat, what is the angular relationship between the angle of incidence and the angle of reflection
Last Answer : The angles are equal.
Description : When a wavefront is radiated into a waveguide, what happens to the portions of the wavefront that do not satisfy the boundary conditions?
Last Answer : Decrease to zero.
Description : What interaction causes energy to travel down a waveguide?
Last Answer : The interaction of the electric and magnetic fields.
Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?
Last Answer : Energy will no longer pass through the waveguide.
Description : What happens to the bus bar dimensions of the waveguide when the frequency is increased?
Last Answer : The bus bar becomes wider.
Description : The frequency range of a waveguide is determined by what dimensions?
Last Answer : . The "a" dimension.
Description : The large surface area of a waveguide greatly reduces what type of loss that is common in two-wire and coaxial lines?
Last Answer : Copper loss.
Description : The folded waveguide in a bwo serves the same purpose as what component in a twt?
Last Answer : Helix.
Description : How does a waveguide-type lens focus spherical wavefront microwave energy?
Last Answer : Some wavefronts are accelerated so that all wavefronts exit the lens at the same time
Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?
Last Answer : Waveguide dispersion.
Description : The power of a wave in a cylindrical waveguide of radius 2m with electric field 12 units is a) 2.39 b) 3.92 c) 9.23 d) 9.32
Last Answer : a) 2.39
Description : OFCC, stranded, and ribbon cables have different fiber worst bend performance?
Last Answer : Ribbon.
Description : The radius of a bar bend to form a hook, should not be less than (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Five times the diameter
Last Answer : Answer: Option A
Description : Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending
Last Answer : B. Microbending
Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter
Last Answer : d) 32mm diameter
Description : A flitched beam has a. Common neutral axis & both materials bend independently b. Common neutral axis & both materials has common R (Radius of curvature) c. Two neutral axis & both materials has common R (Radius of curvature) d. Two neutral axis & both materials bend independently
Last Answer : b. Common neutral axis & both materials has common R (Radius of curvature)
Description : Choose which of following condition is not required for a waveguide to exist. a) The dimensions should be in accordance with desired frequency b) Cut-off frequency should be minimum 6GHz c) The shape should be spherical d) No specific condition is required for waveguide design
Last Answer : c) The shape should be spherical
Description : When examining a completed bend test, the angle of the bend was found to be 185°. The testing specification calls for the sample to have been formed through 180°? a) They should be acceptable as ... then re-examined d) They should be rejected as the angle is not close enough to be acceptable
Last Answer : c) New bends should be produced and bent to 180° then re-examined
Description : The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?
Description : The constant-speed electrons of an electron bunch in a reflex klystron must remain in the repeller field for what minimum time?
Last Answer : Three-quarter cycle.
Description : Emergency eyewash facilities must be located within what minimum number of feet of an eyehazard area?
Last Answer : 10 feet.
Description : To radiate power efficiently, a long-wire antenna must have what minimum overall length?
Last Answer : One-half wavelength.
Description : The cutoff wavelength of matched-clad and depressed-clad single mode fibers varies according to the fiber's radius of curvature and length. The cutoff wavelength of which single mode fiber type is more sensitive to length
Last Answer : Depressed-clad.
Description : Optical fibers or cables should never be bent at a radius of curvature smaller than a certain value. Identify this radius of curvature
Last Answer : Minimum bend radius.
Description : What typesAdvances of circular waveguide?
Last Answer : Need answer
Description : A dielectric waveguide for the propagation of electromagnetic energy at light frequencies a. Stripline b. Microstrip c. Laser beam d. Fiber optics
Last Answer : d. Fiber optics
Description : Proposed the use of clad glass fiber as a dielectric waveguide a. Karpon and Keck b. Karpon and Bockham c. Bockham and Kao d. Kao and Keck
Last Answer : c. Bockham and Kao
Description : Which of the following antennas is best excited from a waveguide? A. Biconical B. Horn C. Helical D. Discone
Last Answer : B. Horn
Description : What device in a waveguide system used for stopping or diverting electromagnetic wave as desired? A. Mechanical switch B. Electric switch C. Push-button switch D. Waveguide switch
Last Answer : D. Waveguide switch
Description : Which of the following is not a bounded medium? A. Coaxial line B. Two-wire line C. Waveguide D. Free space
Last Answer : D. Free space
Description : Best reason for pressurizing waveguides with dry air A. To maintain propagation B. To maintain temperature of the waveguide C. To reduce the possibility of internal arcing D. To increase the speed of propagation
Last Answer : C. To reduce the possibility of internal arcing
Description : Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM
Last Answer : B. TE
Description : The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these
Last Answer : B. Shorten waveguide link
Description : When electromagnetic wave are propagated through a waveguide, they A. are reflected from the walls but do not travel along them B. travel along all four walls of the waveguide C. travel along the broader walls of the guide D. travel through the dielectric without touching the walls
Last Answer : A. are reflected from the walls but do not travel along them