In which direction does the arrow point on an NPN transistor?

In which direction does the arrow point on an NPN  transistor?
by

1 Answer

Answer :

Outward.
by

Related questions

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

What percentage of current in an NPN transistor reaches the collector?

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

In the NPN transistor, what section is made very thin compared with the other two sections?

Description : In the NPN transistor, what section is made very thin compared with the other two sections?

Last Answer : The P or base section.

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the input signal C) Need for high dc collector supply D) Clipping of output in the negative half of the input signal

Description : If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the ... for high dc collector supply D) Clipping of output in the negative half of the input signal

Last Answer : B) Clipping of output in the positive half of the input signal

When an NPN transistor is saturated its Vce?

Description : When an NPN transistor is saturated its Vce?

Last Answer : is zero

Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Description : Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Last Answer : Answer: B

PNP and NPN transistor:

Description : PNP and NPN transistor:

Last Answer : PNP transistors is the one in which one N, type semiconductor is sandwiched in between two P type or accepter diodes while NPN transistor is the one in which two N type semiconductors are fitted on the both sides of p-type semiconductor to allow to pass current from them.

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

With neat diagram explain working of NPN transistor.

Description : With neat diagram explain working of NPN transistor.

Last Answer : N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals - Emitter, Base and collector. The npn transistor has two ... up in the collector as it is more positive. In this way, current flows in the transistor.

In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit

Description : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit (1) All calculations done earlier have to be repeated (2) Replace all calculated voltages by ... all calculated currents by reverse values (4) Replace all calculated voltages and currents by reverse values 

Last Answer : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit  Replace all calculated voltages and currents by reverse values 

When an NPN transistor is properly biased then most of the electrons from the emitter

Description : When an NPN transistor is properly biased then most of the electrons from the emitter   (A) recombine with holes in the base (B) recombine in the emitter itself (C) pass through the base to the collector (D) are stopped by the junction barrier

Last Answer : a

In an npn transistor, _____ are the minority carriers.

Description : In an npn transistor, _____ are the minority carriers.   (a) Free electrons (b) Acceptor ions (c) Donor ions (d) Holes

Last Answer : In an npn transistor, Holes are the minority carriers.

What is the primary difference between the NPN and PNP amplifiers?

Description : What is the primary difference between the NPN and PNP amplifiers?

Last Answer : The polarity of the source voltage

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

Which direction does the arrow on a weather vane point?

Description : Which direction does the arrow on a weather vane point?

Last Answer : The direction that the wind is blowing.

Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Description : Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Last Answer : Because Zener diodes are operated in the reverse bias mode.

In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Description : In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Last Answer : Toward the arrow.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

The arrow direction in the diode symbol indicates a. Direction of electron flow. b. Direction of hole flow (Direction of conventional current) c. Opposite to the direction of hole flow d. None of the above

Description : The arrow direction in the diode symbol indicates a. Direction of electron flow. b. Direction of hole flow (Direction of conventional current) c. Opposite to the direction of hole flow d. None of the above

Last Answer : b. Direction of hole flow (Direction of conventional current)

The arrow direction in the diode symbol indicates

Description : The arrow direction in the diode symbol indicates

Last Answer : Flow of current

In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

What are the factors that limit the frequency response of a transistor amplifier?

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

What are two transistor tests that can be done with an ohmmeter?

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

How is the collector lead identified on an oval-shaped transistor?

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

Which transistor configuration has the highest input resistance?

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

Which transistor configuration has a current gain of less than 1?

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

What is the greatest danger to a transistor?

Description : What is the greatest danger to a transistor?

Last Answer : Heat.

List three items of information normally included in the general description section of a specification sheet for a transistor.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

Name the two current loops in a transistor.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

What are the majority current carriers in a PNP transistor?

Description : What are the majority current carriers in a PNP transistor?

Last Answer : Holes.

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

What are the three transistor configurations?

Description : What are the three transistor configurations?

Last Answer : Common emitter (CE), common base (CB), and common collector (CC)

What is one of the most important parts of any transistor manufacturing process?

Description : What is one of the most important parts of any transistor manufacturing process?

Last Answer : Quality control.

What was the name of the very first transistor?

Description : What was the name of the very first transistor?

Last Answer : Point-contact.

What electronic function made the transistor famous?

Description : What electronic function made the transistor famous?

Last Answer : Amplification.

The base of a transistor serves a purpose similar to what element of the FET

Description : The base of a transistor serves a purpose similar to what element of the FET

Last Answer : Gate.

What is one of the primary advantages of the FET when compared to the bipolar transistor?

Description : What is one of the primary advantages of the FET when compared to the bipolar transistor?

Last Answer : High input impedance.

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

Why is a high-gain transistor used in the phase-shift oscillator?

Description : Why is a high-gain transistor used in the phase-shift oscillator?

Last Answer : Because of the losses encountered in the RC networks.

What are the three basic configurations of transistor oscillators?

Description : What are the three basic configurations of transistor oscillators?

Last Answer : Common collector (CC), common emitter (CE), and common base (CB).

As a transistor ages, what happens to the leakage current?

Description : As a transistor ages, what happens to the leakage current?

Last Answer : It tends to increase

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction