In the NPN transistor, what section is made very thin compared with the other two sections?

In the NPN transistor, what section is made very thin  compared with the other two sections?
by

1 Answer

Answer :

The P or base section.
by

Related questions

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

What percentage of current in an NPN transistor reaches the collector?

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

In which direction does the arrow point on an NPN transistor?

Description : In which direction does the arrow point on an NPN transistor?

Last Answer : Outward.

An important characteristic of the device shown in figure 'B' of the illustration as compared with conventional NPN or PNP transistors is its ____________. EL-0065 A. higher temperature sensitivity B. higher power ratings C. very high input resistance D. all of the above

Description : An important characteristic of the device shown in figure 'B' of the illustration as compared with conventional NPN or PNP transistors is its ____________. EL-0065 A. higher temperature sensitivity B. higher power ratings C. very high input resistance D. all of the above

Last Answer : Answer: C

When an NPN transistor is saturated its Vce?

Description : When an NPN transistor is saturated its Vce?

Last Answer : is zero

Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Description : Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Last Answer : Answer: B

PNP and NPN transistor:

Description : PNP and NPN transistor:

Last Answer : PNP transistors is the one in which one N, type semiconductor is sandwiched in between two P type or accepter diodes while NPN transistor is the one in which two N type semiconductors are fitted on the both sides of p-type semiconductor to allow to pass current from them.

If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the input signal C) Need for high dc collector supply D) Clipping of output in the negative half of the input signal

Description : If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the ... for high dc collector supply D) Clipping of output in the negative half of the input signal

Last Answer : B) Clipping of output in the positive half of the input signal

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

With neat diagram explain working of NPN transistor.

Description : With neat diagram explain working of NPN transistor.

Last Answer : N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals - Emitter, Base and collector. The npn transistor has two ... up in the collector as it is more positive. In this way, current flows in the transistor.

In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit

Description : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit (1) All calculations done earlier have to be repeated (2) Replace all calculated voltages by ... all calculated currents by reverse values (4) Replace all calculated voltages and currents by reverse values 

Last Answer : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit  Replace all calculated voltages and currents by reverse values 

When an NPN transistor is properly biased then most of the electrons from the emitter

Description : When an NPN transistor is properly biased then most of the electrons from the emitter   (A) recombine with holes in the base (B) recombine in the emitter itself (C) pass through the base to the collector (D) are stopped by the junction barrier

Last Answer : a

In an npn transistor, _____ are the minority carriers.

Description : In an npn transistor, _____ are the minority carriers.   (a) Free electrons (b) Acceptor ions (c) Donor ions (d) Holes

Last Answer : In an npn transistor, Holes are the minority carriers.

A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it uses a beam of electrons which has wavelength much longer than that of photons (b) the resolving power of the electron microscope is much higher than that of the light microscope (c) the resolving power of the electron microscope is 200 - 350 nm as compared to 0.1 - 0.2 nm for the light microscope (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope

What is one of the primary advantages of the FET when compared to the bipolar transistor?

Description : What is one of the primary advantages of the FET when compared to the bipolar transistor?

Last Answer : High input impedance.

What is the primary difference between the NPN and PNP amplifiers?

Description : What is the primary difference between the NPN and PNP amplifiers?

Last Answer : The polarity of the source voltage

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

List three items of information normally included in the general description section of a specification sheet for a transistor.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data

What was the name of the very first transistor?

Description : What was the name of the very first transistor?

Last Answer : Point-contact.

Which of the following conditions does not hold good for a solution to a critical section problem ? (A) No assumptions may be made about speeds or the number of CPUs. (B) No two processes may be simultaneously inside their critical sections. (C) Processes running outside its critical section may block other processes. (D) Processes do not wait forever to enter its critical section.

Description : Which of the following conditions does not hold good for a solution to a critical section problem ? (A) No assumptions may be made about speeds or the number of CPUs. (B) No two processes ... critical section may block other processes. (D) Processes do not wait forever to enter its critical section.

Last Answer : (C) Processes running outside its critical section may block other processes. 

The control section can be compared to what?

Description : The control section can be compared to what?

Last Answer : A telephone exchange.

What electronic function made the transistor famous?

Description : What electronic function made the transistor famous?

Last Answer : Amplification.

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

Why is the base part of the transistor thin ?

Description : Why is the base part of the transistor thin ?

Last Answer : Transistors are made to amplify electrical signals. The active region of the transistor is the ground / back. The thinner the back , the stronger the discharging collector's electric field. As a result, if a ... gain ( B) will be excessive. This is why the base part of the transistor is thinned.

TFT stands for ________ A. Thick Film Transistor B. Thin Film Transistor C. Thin Film Transmitter D. Thick Film Transmitter

Description : TFT stands for ________ A. Thick Film Transistor B. Thin Film Transistor C. Thin Film Transmitter D. Thick Film Transmitter

Last Answer : B. Thin Film Transistor

Mark the correct option a) Changing station is a Railway station is where the beats of two transit sections join and where the mails brought by one of them are handed over to the other b) A connecting station is an RMS section working in a train in immediate connection with another train in which another RMS section works c) Regn of newspaper, renewal or canceling any registration will be issued by Head of the department d) All the above

Description : Mark the correct option a) Changing station is a Railway station is where the beats of two transit sections join and where the mails brought by one of them are handed over to the other b) ... , renewal or canceling any registration will be issued by Head of the department d) All the above

Last Answer : d) All the above

What are the two major sections of a typical AM transmitter?

Description : What are the two major sections of a typical AM transmitter?

Last Answer : Rf and af units.

What are the four basic sections of a power supply?

Description : What are the four basic sections of a power supply?

Last Answer : Transformer, rectifier, filter, regulator.

What are the four basic sections to a power supply?

Description : What are the four basic sections to a power supply?

Last Answer : Transformer, rectifier, filter, regulator.

What are the names of the sections that make up the cpu?

Description : What are the names of the sections that make up the cpu?

Last Answer : Control section, internal storage section, and arithmetic-logic section.

How many sections make up the central processing unit?

Description : How many sections make up the central processing unit?

Last Answer : Three.

Name the three main sections of a typical rf signal generator.

Description : Name the three main sections of a typical rf signal generator.

Last Answer : Oscillator circuit, modulator, and output control circuit.

What are two transistor tests that can be done with an ohmmeter?

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

Name the two current loops in a transistor.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

What are the factors that limit the frequency response of a transistor amplifier?

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

How is the collector lead identified on an oval-shaped transistor?

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

Which transistor configuration has the highest input resistance?

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

Which transistor configuration has a current gain of less than 1?

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

What is the greatest danger to a transistor?

Description : What is the greatest danger to a transistor?

Last Answer : Heat.

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

What are the majority current carriers in a PNP transistor?

Description : What are the majority current carriers in a PNP transistor?

Last Answer : Holes.

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.