Materials with lots of free electrons are called?

Materials with lots of free electrons are called?

A.conductors

B.insulators

C.semiconductors

D.filters
by

1 Answer

Answer :

Materials with lots of free electrons are called?

A.conductors

B.insulators

C.semiconductors

D.filters

by

Related questions

The substances which have a large number of free electrons and offer a low resistance are called?

Description : The substances which have a large number of free electrons and offer a low resistance are called?

Last Answer : The substances which have a large number of free electrons and offer a low resistance are called conductors.

The number of electrons in the outer most orbit of carbon atom is?

Description : The number of electrons in the outer most orbit of carbon atom is?

Last Answer : The number of electrons in the outer most orbit of carbon atom is 4.

When placed close together, two positively charged materials will?

Description : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

Last Answer : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

_______are the materials having electrical conductivity much less than most of the metals but much greater...

Description : _______are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.

Last Answer : Semi-conductors are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.

Insulating materials have the function of?

Description : Insulating materials have the function of?

Last Answer : Insulating materials have the function of preventing an open circuit between the voltage source and the load.

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Last Answer : unit pricing

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Last Answer : D)unit pricing.

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What would you do with lots of free time?

Description : What would you do with lots of free time?

Last Answer : I would do crafts, read, and hang out with nature. I would probably also spend a lot of time on the internet, although I consider that not spending time wisely.

Where can I get lots of school desks and ship it free?

Description : Where can I get lots of school desks and ship it free?

Last Answer : You can get lots of school desks and ship them free from most schooling supply companies. If you buy a lot, you can usually get yourself free shipping as a promotion.

What are materials called that do not easily give up or take on electrons?

Description : What are materials called that do not easily give up or take on electrons?

Last Answer : Thede are unreactive elements.

Magnetism in materials is due to - (1) electrons at rest (2) circular motion of electrons (3) protons at rest (4) all neutrons at rest

Description : Magnetism in materials is due to - (1) electrons at rest (2) circular motion of electrons (3) protons at rest (4) all neutrons at rest

Last Answer : (2) circular motion of electrons Explanation: Myopia is commonly known shortsighted. It is a condition of the eye where the light that comes in does not directly focus on the retina but in ... most commonly correct myopia through the use of corrective lenses, such as glasses or contact lenses.

A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it uses a beam of electrons which has wavelength much longer than that of photons (b) the resolving power of the electron microscope is much higher than that of the light microscope (c) the resolving power of the electron microscope is 200 - 350 nm as compared to 0.1 - 0.2 nm for the light microscope (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope

The reason why materials appear colored is (a) The selective absorption of spectral colors (b) The interaction between the light and the electrons of the dye molecules (c) The composition of the white light from various spectral colors (d) All of these

Description : The reason why materials appear colored is (a) The selective absorption of spectral colors (b) The interaction between the light and the electrons of the dye molecules (c) The composition of the white light from various spectral colors (d) All of these

Last Answer : All of these

Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Description : Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by ... all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Last Answer : Option A

Magnetism in materials is due to (1) electrons at rest (2) circular motion of electrons (3) protons at rest (4) all neutrons at rest

Description : Magnetism in materials is due to (1) electrons at rest (2) circular motion of electrons (3) protons at rest (4) all neutrons at rest

Last Answer : circular motion of electrons

A substance whose molecules consist of dissimilar atoms is called?

Description : A substance whose molecules consist of dissimilar atoms is called?

Last Answer : A substance whose molecules consist of dissimilar atoms is called compound.

Electric pressure is also called?

Description : Electric pressure is also called?

Last Answer : Electric pressure is also called voltage.

Inductance

Description : Inductance

Last Answer : Inductance

Resistance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

For one ac cycles .. alternator needs to rotate??

Description : please answer

Last Answer : 360 degree . 180 Degree Positive and 180 degree negative

An ideal power supply consist of

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance 

When a sine wave has a frequency of 100 Hz in 12 s it goes through?

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Fourteen milliamperes can be expressed as?

Description : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

Last Answer : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor?

Description : How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

Last Answer : 500 V

When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is?

Description : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Last Answer : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

How much resistance is needed to draw 17.6 mA from a 12 volt source?

Description : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Last Answer : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of

Description : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Last Answer : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is?

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary

Description : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

Last Answer : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

In a Y-connected circuit, the magnitude of each line current is?

Description : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Last Answer : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

The turns ratio required to match an 80 ohms source to a 320 ohms load is?

Description : The turns ratio required to match an 80 ohms source to a 320 ohms load is? A.80 B.20 C.4 D.2

Last Answer : c

When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is?

Description : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Last Answer : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

A resistance of 3.3 M ohms is connected across a 500 V source. The resulting current is approximately?

Description : A resistance of 3.3 M ohms is connected across a 500 V source. The resulting current is approximately? A.15.1 μA B.151 μA C.66 mA D.660 mA

Last Answer : A

The formula to find I when the values of V and R are known is?

Description : The formula to find I when the values of V and R are known is? A.I = VR B.I = R/V C.V = IR D.I = V/R

Last Answer : The formula to find I when the values of V and R are known is? A.I = VR B.I = R/V C.V = IR D.I = V/R

When converting 0.16 mA to microamperes, the result is?

Description : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

Last Answer : When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

The average value of a 12 V peak sine wave over one complete cycle is?

Description : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Last Answer : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor

Description : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Last Answer : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary

Description : A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary winding. The turns ratio is? A.0.2 B.0.4 C.5 D.25

Last Answer : A certain transformer has 400 turns in the primary winding and 2,000 turns in the secondary winding. The turns ratio is? A.0.2 B.0.4 C.5 D.25

If it takes 400 ms to use 12,000 J of energy, the power is?

Description : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

Last Answer : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

A material that does not allow current under normal conditions is a(n)?

Description : A material that does not allow current under normal conditions is a(n)? A.insulator B.conductor C.semiconductor D.valence

Last Answer : A material that does not allow current under normal conditions is a(n)? A.insulator B.conductor C.semiconductor D.valence

Current flows in a circuit when?

Description : Current flows in a circuit when? A.a switch is opened B.a switch is closed C.the switch is either open or closed D.there is no voltage

Last Answer : Current flows in a circuit when? A.a switch is opened B.a switch is closed C.the switch is either open or closed D.there is no voltage

Four amperes of current are measured through a 24 ohms resistor connected across a voltage

Description : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

Last Answer : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter

Description : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

Last Answer : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

How much resistance is required to limit the current from a 12 V battery to 3.6 mA?

Description : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

Last Answer : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

The number of millivolts in 0.06 kilovolts is?

Description : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

Last Answer : The number of millivolts in 0.06 kilovolts is? A.600 V B.6,000 mV C.60,000 mV D.600,000 mV

A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of?

Description : A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of? B.12 kHz C.18 kHz D.1.3 MHz

Last Answer : A sine wave of 15 kHz is changing at a faster rate than a sine wave with a frequency of? B.12 kHz C.18 kHz D.1.3 MHz