Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Readability 2 means that your transmission is:
a. Readable but with difficulty
b. Readable
c. Readable now and then
d. Two way communications have been established
by

1 Answer

Answer :

c. Readable now and then
by

Related questions

Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Description : Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Last Answer : c. Readable now and then

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty

Readability 2 means that your transmission is:

Description : Readability 2 means that your transmission is:

Last Answer : readable now and then

The message “READABILITY 3’’ means

Description : The message “READABILITY 3’’ means

Last Answer : readable but with diffuculty

The best signals for VHF communications are obtained when the position of the aircraft is at :

Description : The best signals for VHF communications are obtained when the position of the aircraft is at :

Last Answer : high altitude and in the vicinity of the aerodrome

The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Description : The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Last Answer : d. 118.0 to 136.975 MHz

The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Description : The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Last Answer : c. UTC

The selection of the code 7600 on a transponder indicates: a. Loss of communications b. Distress c. Urgency d. Hijacking

Description : The selection of the code 7600 on a transponder indicates: a. Loss of communications b. Distress c. Urgency d. Hijacking

Last Answer : a. Loss of communications

The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Description : The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Last Answer : a. Listen out on frequency

Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Description : Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Last Answer : c. EAT or ETA

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

The term “DISREGARD” means: a. Ignore b. Cancel the last clearance c. You have not been cleared d. Pay no attention to what I say

Description : The term “DISREGARD” means: a. Ignore b. Cancel the last clearance c. You have not been cleared d. Pay no attention to what I say

Last Answer : a. Ignore

The term “RECLEARED” means that: a. Your last clearance is confirmed b. Your last clearance has been cancelled c. You may proceed as you please d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

Description : The term “RECLEARED” means that: a. Your last clearance is confirmed b. Your last clearance has been cancelled c. You may proceed as you please d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

Last Answer : d. A change has been made to your last clearance and this new clearance supersedes your previous clearance

When making a blind transmission you should:

Description : When making a blind transmission you should:

Last Answer : transmit the message twice

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

The code “BECMG FM 1100 –RASH” in a METAR means: a. From 1100UTC, the cessation of rain showers b. Becoming from 1100UTC slight rain showers

Description : The code “BECMG FM 1100 –RASH” in a METAR means:  a. From 1100UTC, the cessation of rain showers  b. Becoming from 1100UTC slight rain showers  c. Becoming from 1100UTC rain showers  d. Becoming from 1100UTC till 0000UTC slight rain showers

Last Answer : b. Becoming from 1100UTC slight rain showers

The instruction “ORBIT”from ATC means that the aircraft should:

Description : The instruction “ORBIT”from ATC means that the aircraft should:

Last Answer : carry out one 360 degree turn only

The term “DISREGARD” means:

Description : The term “DISREGARD” means:

Last Answer : Ignore

The message “CHECK” to an aircraft means that you would:

Description : The message “CHECK” to an aircraft means that you would:

Last Answer : examine a system or procedure

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that the braking action is:

Last Answer : poor

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Description : The phrase “BRAKING CO-EFFICIENT 20” from ATC means that braking action: a. Poor b. Medium to poor c. Medium d. Slippery

Last Answer : a. Poor

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, in addition, shall similarly transmit all other relevant information to: a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO b. ICAO only c. Each State whose citizens were known to be on board only d. ICAO and each State whose citizens were known to be on board only

Description : When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, ... be on board only d. ICAO and each State whose citizens were known to be on board only

Last Answer : a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO

If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The CSD can be disconnected then reconnected later when the temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Description : If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The ... temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Last Answer : d. The CSD can be disconnected but not used for the rest of the flight

What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of alcoho l that has been consumed c. 12 hours but it depends upon the amount of alcohol that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed

In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Description : In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Last Answer : D. Computer data

If a transponder is unserviceable before an IFR departure, then the pilot:

Description : If a transponder is unserviceable before an IFR departure, then the pilot:

Last Answer : may proceed with the flight with ATC permission

. If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Description : . If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Last Answer : c. I SAY AGAIN

. If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Description : . If a transponder is unserviceable before an IFR departure, then the pilot: a. Has to cancel the flight b. May proceed with the flight with ATC permission c. Has to fly low level only d. Should fly for another company

Last Answer : b. May proceed with the flight with ATC permission

A marshaller crosses his/her hands in front of the face, palms outward and then moves the arms outwards. What does the signal indicate? a. Clear to move forward b. Brakes off c. Remove chocks d. Clear to close all engines

Description : A marshaller crosses his/her hands in front of the face, palms outward and then moves the arms outwards. What does the signal indicate? a. Clear to move forward b. Brakes off c. Remove chocks d. Clear to close all engines

Last Answer : c. Remove chocks

no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ

Description : no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ b. NNNN c. A/N d. A/D XXX

Last Answer : a. ZZZZ

You have been intercepted in the airspace of a foreign contracting state. What is the signal for ‘clear to proceed’ from the intercepting aircraft? a. Rocking wings b. Flashing lights c. Cut across track d. Breaking turn up and left

Description : You have been intercepted in the airspace of a foreign contracting state. What is the signal for ‘clear to proceed’ from the intercepting aircraft? a. Rocking wings b. Flashing lights c. Cut across track d. Breaking turn up and left

Last Answer : d. Breaking turn up and left

The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance b. The aircraft is in imminent danger and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Description : The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance ... danger and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Last Answer : b. The aircraft is in imminent danger and requires immediate assistance

If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Description : If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Last Answer : d. At all times on the ground when the engines are running

What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. Flight plan required but PIC need not notify of any changes d. A flight plan is only required if advisory service is required

Description : What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. ... need not notify of any changes d. A flight plan is only required if advisory service is required

Last Answer : b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not

Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of the direction from which B approaches b. Aircraft B, regardless of the direction from which A approaches c. Aircraft A, if B is to the right of him d. Aircraft B, if A is to the left of him

Description : Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of ... A, if B is to the right of him d. Aircraft B, if A is to the left of him

Last Answer : d. Aircraft B, if A is to the left of him

An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Description : An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Last Answer : b. Do not land because the aerodrome is unusable

Decreasing the leading will space the lines out, allowing for improved readability. -Technology

Description : Decreasing the leading will space the lines out, allowing for improved readability. -Technology

Last Answer : FalseIncreasing the leading will space the lines out, allowing for improved readability.

An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Description : An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Last Answer : Readability

The advantage of COM are its “ and “ a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Description : The advantage of COM are its “ and “ a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Last Answer : Compact size, speed

What will happen if white space is repeatedly used around the object? a. It will reduce the readability b. It will create a border c. It will make it more appealing by augmenting the object d. All of the above

Description : What will happen if white space is repeatedly used around the object? a. It will reduce the readability b. It will create a border c. It will make it more appealing by augmenting the object d. All of the above

Last Answer : c. It will make it more appealing by augmenting the object

Using white space around an object will: A. Waste space that could be used for marketing B. Decrease readability C. Enhance the object and draw attention to it D. Make a borde

Description : Using white space around an object will: A. Waste space that could be used for marketing B. Decrease readability C. Enhance the object and draw attention to it D. Make a borde

Last Answer : C. Enhance the object and draw attention to it

The advantage of COM are its … and … a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Description : The advantage of COM are its … and … a. Compact size; speed readability b. Compact size, speed c. Readability; speed d. Low cost; readability

Last Answer : b. Compact size, speed

Which of the following is false regarding the evaluation of computer programming languages? (A) Application oriented features (B) Efficiency and Readability (C) Software development (D) Hardware maintenance cost

Description : Which of the following is false regarding the evaluation of computer programming languages? (A) Application oriented features (B) Efficiency and Readability (C) Software development (D) Hardware maintenance cost

Last Answer : (D) Hardware maintenance cost

Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying through the same cloud with the same true airspeed. The cloud consists of small supercooled droplets. Which of the following statements is most correct concerning ice accretion? a. Aircraft T experiences more icing than S b. Aircraft S and T experience the same amount of icing c. Neither of the aircrafts accumulate ice due to the small size of droplets d. Aircraft S experiences more icing than T

Description : Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying  through the same cloud with the same true airspeed. The cloud consists of small  ... aircrafts accumulate ice due to the small size of droplets  d. Aircraft S experiences more icing than T

Last Answer : d. Aircraft S experiences more icing than T

A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Description : A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Last Answer : a. The temperature of the hottest cylinder

You're 36,000 ft. above earth and a hole erupts in the fuselage of the aircraft you are in. What are your thoughts and what would you do?

Description : You're 36,000 ft. above earth and a hole erupts in the fuselage of the aircraft you are in. What are your thoughts and what would you do?

Last Answer : I am not very religious but I think I would pray.