What happens if you place an electric coil around a rod of Bismuth?

What happens if you place an electric coil around a rod of Bismuth?
by

1 Answer

Answer :

It would just get hot, I suppose. You can quite easily melt it and make pretty looking crystallised blocks of the stuff. Here’s a good Instructable: http://www.instructables.com/id/Fun-with-Bismuth/ If it melts on your electrical coil, it might make a bit of a mess of it, but they say it doesn’t stick to other metals very well, so it can just be scraped off.
by

Related questions

What happens when you coil a magnetic rod?

Description : What happens when you coil a magnetic rod?

Last Answer : Maybe might make a rail gun?

What happens if you put an electric coil around on iron pipe?

Description : What happens if you put an electric coil around on iron pipe?

Last Answer : No. And nothing happens to the wire since it is shielded by the pipe.

Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Description : Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Last Answer : Option A

What happens if the coil length of an electric motor is increased ?

Description : What happens if the coil length of an electric motor is increased ?

Last Answer : Increasing the length of the coil will increase the magnetic field.

Bismuth Aurite is the mineral of?

Description : Bismuth Aurite is the mineral of?

Last Answer : Gold

What is the sign of bismuth ?

Description : What is the sign of bismuth ?

Last Answer : Bi Bismath's signal

Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

Description : Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

Last Answer : Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

(A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as compared to impuriites.

Description : (A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as compared to impuriites.

Last Answer : (A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as ... D. If (A) is incorrect but (R ) is correct

Explain the trend in oxidation state of elements from nitrogen to bismuth.

Description : Explain the trend in oxidation state of elements from nitrogen to bismuth.

Last Answer : Explain the trend in oxidation state of elements from nitrogen to bismuth.

Why is bismuth an element?

Description : Why is bismuth an element?

Last Answer : Because bismuth is a pure substance and its smallest unit is anatom of bismuth.

IN the beta decay of Bismuth-214 what daughter element is produced?

Description : IN the beta decay of Bismuth-214 what daughter element is produced?

Last Answer : Feel Free to Answer

Type metal used in printing press is an alloy of - (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of - (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: Lead and antimony are used to make type metals alloy. These type metals are used to make the character produced durable and tough.

Type metal used in printing press is an alloy of – (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of – (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main ... make castings with sharp details because molten lead shrinks and sags when it cools to a solid.

Presence of even 0.005% of __________ in copper makes it highly brittle, rendering it useless for wire-drawing. (A) Oxygen (B) Arsenic (C) Antimony (D) Bismuth

Description : Presence of even 0.005% of __________ in copper makes it highly brittle, rendering it useless for wire-drawing. (A) Oxygen (B) Arsenic (C) Antimony (D) Bismuth

Last Answer : (D) Bismuth

Presence of even very minute amount (say 0.1%) of __________ in copper, reduces its electrical conductivity very seriously. (A) Bismuth (B) Arsenic (C) Antimony (D) Both (B) and (C)

Description : Presence of even very minute amount (say 0.1%) of __________ in copper, reduces its electrical conductivity very seriously. (A) Bismuth (B) Arsenic (C) Antimony (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Of the following categories of medications, which is used in combination with bismuth salts to eradicate Helicobacter pylori? a) Antibiotics Antibiotics and bismuth salts are given to eradicate H. pylori. b) Antacids Antacids are given to manage gastric acidity. c) Proton pump inhibitors Proton pump inhibitors are given to decrease acid secretion. d) Histamine-2 receptor antagonists Histamine-2 receptor antagonists are given to decrease the acid secretion in the stomach.

Description : Of the following categories of medications, which is used in combination with bismuth salts to eradicate Helicobacter pylori? a) Antibiotics Antibiotics and bismuth salts are given to eradicate ... antagonists Histamine-2 receptor antagonists are given to decrease the acid secretion in the stomach.

Last Answer : a) Antibiotics Antibiotics and bismuth salts are given to eradicate H. pylori.

The following is true of anti-H.pylori therapy except: A. It is indicated in all patients of peptic ulcer B. Resistance to any single antimicrobial drug develops rapidly C. Concurrent suppression of gastric acid enhances efficacy of the regimen D. Colloidal bismuth directly inhibits H.pylori but has poor patient acceptability

Description : The following is true of anti-H.pylori therapy except: A. It is indicated in all patients of peptic ulcer B. Resistance to any single antimicrobial drug develops rapidly C. Concurrent ... efficacy of the regimen D. Colloidal bismuth directly inhibits H.pylori but has poor patient acceptability

Last Answer : A. It is indicated in all patients of peptic ulcer

Choose the correct statement about colloidal bismuth subcitrate: A. It causes prolonged neutralization of gastric acid B. It has anti-H.pylori activity C. It relieves peptic ulcer pain promptly D. All of the above are correct

Description : Choose the correct statement about colloidal bismuth subcitrate: A. It causes prolonged neutralization of gastric acid B. It has anti-H.pylori activity C. It relieves peptic ulcer pain promptly D. All of the above are correct

Last Answer : B. It has anti-H.pylori activity

ntacids administered concurrently reduce efficacy of the following antipeptic ulcer drug: A. Cimetidine B. Colloidal bismuth C. Sucralfate D. Pirenzepine

Description : ntacids administered concurrently reduce efficacy of the following antipeptic ulcer drug: A. Cimetidine B. Colloidal bismuth C. Sucralfate D. Pirenzepine

Last Answer : C. Sucralfate

Choose the antiulcer drug that inhibits gastric acid secretion, stimulates gastric mucus and bicarbonate secretion and has cytoprotective action on gastric mucosa: A. Misoprostol B. Sucralfate C. Carbenoxolone sodium D. Colloidal bismuth subcitrate

Description : Choose the antiulcer drug that inhibits gastric acid secretion, stimulates gastric mucus and bicarbonate secretion and has cytoprotective action on gastric mucosa: A. Misoprostol B. Sucralfate C. Carbenoxolone sodium D. Colloidal bismuth subcitrate

Last Answer : A. Misoprostol

_________ drug is avoided in children’s under 4 years with diarrhea. a) bisacodyl b) loperamide c) Bismuth subsalicylate d) Ciprofloxacin

Description : _________ drug is avoided in children’s under 4 years with diarrhea. a) bisacodyl b) loperamide c) Bismuth subsalicylate d) Ciprofloxacin

Last Answer : d) Ciprofloxacin

What is the oxidation number of Bismuth in the compound Bismuth Phosphide?

Description : What is the oxidation number of Bismuth in the compound Bismuth Phosphide?

Last Answer : ANSWER: + 3 (accept 3)

Which of the following is the element represented by the symbol B? w)Barium x)Bismuth y)Boron z)Beryllium

Description : Which of the following is the element represented by the symbol B? w)Barium x)Bismuth y)Boron z)Beryllium

Last Answer : ANSWER: Y -- BORON

Type metal used in printing press is an alloy of (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer :  lead and antimony

A metal ball on an insulated stand is touched by a positively charged glass rod. What happens to the metal ball? Does it w) gain protons and lose electrons x) gain protons y) gain more protons than electrons z) lose electrons

Description : A metal ball on an insulated stand is touched by a positively charged glass rod. What happens to the metal ball? Does it w) gain protons and lose electrons x) gain protons y) gain more protons than electrons z) lose electrons

Last Answer : ANSWER: Z -- LOSE ELECTRONS

True statement about dark adaptation include: a. the threshold for light intensity falls b. it is biphasic c. the initial adaptation is due to rod adaptation d. the change in the light intensity threshold is usually around 100 folds

Description : True statement about dark adaptation include: a. the threshold for light intensity falls b. it is biphasic c. the initial adaptation is due to rod adaptation d. the change in the light intensity threshold is usually around 100 folds

Last Answer : the threshold for light intensity falls

I don’t want to spend any money for any grounding device when I can make one myself. All I have to do it get a ground rod, some 20 gauge wire, and then wrap the wire around my ankle or foot at night.

Description : I don’t want to spend any money for any grounding device when I can make one myself. All I have to do it get a ground rod, some 20 gauge wire, and then wrap the wire around my ankle or foot at night.

Last Answer : You can certainly do it. People have done it any times. However, it is not particularly comfortable. You could possibly cut off circulation if you wrap the wire too tight around your extremity. Secondly, a sharp end on a wire wrapped around the ankle could tear the sheet.

What happens to the H lines between the conductors of a coil when the conductors are close together?

Description : What happens to the H lines between the conductors of a coil when the conductors are close together?

Last Answer : The H lines cancel.

If the permeability of the core of a coil increases, what happens to (a) inductance and (b) true power in the circuit?

Description : If the permeability of the core of a coil increases, what happens to (a) inductance and (b) true power in the circuit?

Last Answer : (a) Inductance increases; (b) true power decreases.

Give reason: Stationary coil and stationary magnet cannot produce induced electric current.

Description : Give reason: Stationary coil and stationary magnet cannot produce induced electric current.

Last Answer : An emf is induced in the coil only when there is relative motion between the coil and the magnet.

A device that converts mechanical energy into electric energy is called----? A. Motor. B. Transformer. C. Coil. D. Generator?

Description : A device that converts mechanical energy into electric energy is called----? A. Motor. B. Transformer. C. Coil. D. Generator?

Last Answer : B. Transformer.

Why is the electric current absorbed in the coil ?

Description : Why is the electric current absorbed in the coil ?

Last Answer : Electromagnetic induction results in energy.

It takes `16 min` to boil some water in an electric kettle. Due to some defect it becomes necessary to remove `10 %` turns of the heating coil of the

Description : It takes `16 min` to boil some water in an electric kettle. Due to some defect it becomes necessary to remove `10 %` turns of the heating coil of the

Last Answer : It takes `16 min` to boil some water in an electric kettle. Due to some defect it becomes necessary to remove `10 ... min C. `20.9` min D. `13.9` min

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

To stop the electric motor shown in the illustration, the stop button is depressed, causing ____________. EL-0012 A. coil 'MS' to become de-energized B. contacts 'CR1' and 'MR4' to open C. contacts 'MR1', 'MR2', and 'MR3' to open D. contacts 'MS1', 'MS2', and 'MS3' to open

Description : To stop the electric motor shown in the illustration, the stop button is depressed, causing ____________. EL-0012 A. coil 'MS' to become de-energized B. contacts 'CR1' and 'MR4' to open C. contacts 'MR1', 'MR2', and 'MR3' to open D. contacts 'MS1', 'MS2', and 'MS3' to open

Last Answer : Answer: C

Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Description : Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Last Answer : Answer: A

Humming or buzzing of electric contacts is a symptom of ____________. A. low voltage on the operating coil B. power failure to the operating coil C. a control circuit ground D. a control circuit overload

Description : Humming or buzzing of electric contacts is a symptom of ____________. A. low voltage on the operating coil B. power failure to the operating coil C. a control circuit ground D. a control circuit overload

Last Answer : Answer: A

Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in armature reaction are compensated for by the __________ A. governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Description : Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in ... . governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Last Answer : Answer: B

Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Description : Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Last Answer : (B) Pipestill

The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

How can electric currents be induced with a coil and a magnet?

Description : How can electric currents be induced with a coil and a magnet?

Last Answer : by moving either the magnet or the coil

The windings of the electromagnetic are usually called: a. Magnetic coils b. Field coil c. Electric coil d. simple coil

Description : The windings of the electromagnetic are usually called: a. Magnetic coils b. Field coil c. Electric coil d. simple coil

Last Answer : c. Electric coil

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Description : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Last Answer : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic ... C. `4pixx10^(-5)T` D. `2pixx10^(-5)T`

The exchanger typically used in the pressurizing section of a dairy plant is a) Plate heat exchanger b) Shell and tube exchanger c) Run around coil exchanger d) All of the above

Description : The exchanger typically used in the pressurizing section of a dairy plant is a) Plate heat exchanger b) Shell and tube exchanger c) Run around coil exchanger d) All of the above

Last Answer : Plate heat exchanger

A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Description : A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Last Answer : (A) Compartmen

I live Q. I live in an old apartment building without grou in an old apartment building without grounded elect nded electrical outlets and I rical outlets and I cannot place a cannot place a ground rod outside in the Earth. What can I do?

Description : I live Q. I live in an old apartment building without grou in an old apartment building without grounded elect nded electrical outlets and I rical outlets and I cannot place a cannot place a ground rod outside in the Earth. What can I do?

Last Answer : If you don't mind a you don't mind a wire running through your apartmen wire running through your apartment, you could conn t, you could connect your Earthing ect your Earthing product to the cold ... Earthing mat in your office or in your office or place of work if place of work if practical.

If I Q. If I place a ground rod in the earth outdoors is place a ground rod in the earth outdoors is it OK i it OK if it gets rained on?

Description : If I Q. If I place a ground rod in the earth outdoors is place a ground rod in the earth outdoors is it OK i it OK if it gets rained on?

Last Answer : Totally OK. The presence of moisture increases the flow of electrons from the Earth. That's why it's great to stand or walk barefoot in damp grass or in the surf or in the surf or wet sand at the ... sprinklers. You can even water the ground rod every week or so, if you like to keep the soil moist.

Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Description : Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Last Answer : (3) Radiation and convection only Explanation: Conduction is the transfer of heat energy by direct contact, convection is the movement of heat by actual motion of matter; radiation is the transfer of energy with the help of electromagnetic waves.