Description : The specific fuel consumption per BHP hour for diesel engine is approximately a. 0.1 kg b. 0.2 kg c. 0.3 kg d. 0.4 kg
Last Answer : ANSWER b. 0.2 kg
Description : Specific fuel consumption is defined as a. fuel consumption per hour b. fuel consumed per km. c. fuel consumed per BHP d. fuel consumed per hour per BHP
Last Answer : ANSWER d. fuel consumed per hour per BHP
Description : The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh
Last Answer : ANSWER : B
Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour
Last Answer : Ans :b
Description : The specific fuel consumption of a petrol engine compared to diesel engine of same H.P is A. same B.more C. less D. unpredictable
Description : A 5 BHP engine running at full load would consume diesel of the order of A. 0.3 kg/hr B. 1 kg/hr C. 3 kg/hr D. 5 kg/hr
Last Answer : ANSWER ; B
Description : Air fuel ratio for idling speed of a petrol engine is approximately A. 1:1 B. 5:1 C. 20:1 D. 10:1
Last Answer : ANSWER : D
Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency
Last Answer : Ans :c
Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.
Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation
Description : The fuel in diesel engine is normally injected at pressure of a. 5-10 kg/cm2 b. 20-25 kg/cm2 c 60-80 kg/cm2 d. 90-130 kg/cm2
Last Answer : ANSWER d. 90-130 kg/cm2
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : Air fuel ratio at which a petrol engine cannot work is A. 8:1 B. 12:1 C. 15:1 D. 20:1 and less
Description : The theoretically correct air fuel ratio of a petrol engine is of the order of A. 6:1 B. 10:1 C. 15:1 D. 20:1
Last Answer : ANSWER : C
Description : The fuel air ratio in a petrol engine fitted with suction carburetor, operating with dirty air filter as compared to clean filter will be A. higher B. lower C. remain unaffected D. unpredictable
Last Answer : ANSWER : A
Description : The air-fuel ratio of the petrol engine is governed by A. fuel pump B. governor C. carburetor D. injector
Description : Air fuel ratio at which a petrol engine cannot work is a. 8:1 b. 10:1 c. 20:1 and less d. 15:1
Last Answer : ANSWER c. 20:1 and less
Description : The theoretically correct air fuel ratio for petrol engine is of the order of a.6 : 1 b. 9 : 1 c. 12 : 1 d. 15 : 1
Last Answer : Answer d. 15:1
Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ
Last Answer : ANSWER d. 973.5 kJ
Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on
Description : The back pressure of petrol engine is usually a. 1 ata b. 1.2 ata c. 0.8 ata d. 2 ata.
Last Answer : ANSWER b. 1.2 ata
Description : Cetane number of petrol is around a. 10 b. 15-20 c. 35 d. 55-70
Last Answer : ANSWER b. 15-20
Description : The specific gravity of petrol is about a. 0.65 b. 0.75 c. 0.85 d. 0.95
Last Answer : ANSWER b. 0.75
Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.
Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine
Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc
Last Answer : Ans : c
Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol
Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.
Description : A fuel of an octane number rating of 75 matches in knocking intensity as a mixture of a) 75% iso-octane and 25% normal heptane b) 75% normal heptane and 25% iso-octane c) 75% petrol and 25% diesel d) 75% diesel and 25% petrol
Last Answer : Answer: a Explanation: None.
Description : The stoichiometric air fuel ration for petrol is 15:1 . What is the air fuel ratio required for maximum power? (a) 16:1 – 18:1 (b) 15:1 (c) 12:1 – 14:1 (d) 9:1 – 11:1
Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel
Last Answer : ANSWER a. higher
Description : The air fuel ratio in petrol engines is controlled by a. valve opening / closing b. governing c. carburetion d. scavenging
Last Answer : ANSWER c. carburetion
Description : The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume
Description : A diesel engine compared to petrol engine, running at full load is A. less efficient B. equally efficient C. more efficient D. other factors will decide it
Description : The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less
Description : The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity
Last Answer : ANSWER b. less
Description : If diesel is used in a petrol engine a. engine will not run b. engine detonates c. engine gives smoke d. engine knocks
Last Answer : ANSWER a. engine will not run
Description : For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine
Last Answer : ANSWER b. diesel engine
Description : If petrol is used in a diesel engine a. higher knocking will occur b. efficiency will be low c. low power will be obtained d. black smoke will be produced
Last Answer : ANSWER a. higher knocking will occur
Description : In a petrol engine, which of the following gas gets exhausted out without burning and without transformation? a. CO2 b. CO c. O2 d. N2
Last Answer : ANSWER d. N2
Description : The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance
Last Answer : ANSWER a. supercharging
Description : Which of the following is not an internal combustion engine? a. petrol engine b. steam turbine c. diesel engine d. gas turbine
Last Answer : ANSWER b. steam turbine
Description : A spark plug is used in a. petrol engine b. diesel engine c. gas engine d. steam engine
Last Answer : ANSWER a. petrol engine
Description : Motoring test is conducted on IC engines to determine A. brake power B. indicated power C. friction power D. fuel consumption at full load
Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency
Last Answer : Ans :d
Description : Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption
Last Answer : ANSWER c. power output
Description : At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr
Last Answer : c. 30.3 USG/Hr
Description : One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours
Last Answer : Ans: c
Description : The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 ... d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure
Last Answer : Answer: C
Description : Compression pressure in petrol engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) 35-40 kg/cm2
Last Answer : a) 6-10 kg/cm2
Description : Efficiency of a Carnot engine is given as 80%. If the- cycle direction be reversed, what will be the value of COP ofreversed Carnot cycle (a) 1.25 (b) 0.8 (c) 0.5 (d) 0.25
Last Answer : Ans: d
Description : At a fuel check you have 60 US gallons (USG) of useable fuel remaining. Alternative fuel required is 12 USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable?
Last Answer : 30.3 USG/HR