A bulb in a staircase has two switches, one switch being at the ground floor and the other one at the first

A bulb in a staircase has two switches, one switch being at the ground floor and the other one at the first floor. The bulb can be turned ON and also can be turned OFF by any one of the switches irrespective of the state of the other switch. The logic of switching of the bulb resembles 

(A) and AND gate (B) an OR gate (C) an XOR gate (D) a NAND gate
by

1 Answer

Answer :

A bulb in a staircase has two switches, one switch being at the ground floor and the other one at the first floor. The bulb can be turned ON and also can be turned OFF by any one of the switches irrespective of the state of the other switch. The logic of switching of the bulb resembles an XOR gate

by

Related questions

there are 3 light bulbs in three seperate rooms. in front of you, there is a panel with 3 seperate switches. they only turn on or off. you may look inside each room only once. how can you tell which bulb belongs to which switch? -Riddles

Description : there are 3 light bulbs in three seperate rooms. in front of you, there is a panel with 3 seperate switches. they only turn on or off. you may look inside each room only once. how can you tell which bulb belongs to which switch? -Riddles

Last Answer : you turn on any two switches, leave them for a few minutes, and turn one off. you enter each room only once. you know that the lightbulb that is lit beongs to the switch that was left on, the ... hot, belongs to the switch you turned off, and the cold bulb belongs to the switch you never touched.

There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people lined up outside the entry door. Each bulb is numbered consecutively from 1 to 100. So is each person. Person No. 1 enters the room, switches on every bulb, and exits. Person No. 2 enters and flips the switch on every second bulb (turning off bulbs 2, 4, 6, ...). Person No. 3 enters and flips the switch on every third bulb (changing the state on bulbs 3, 6, 9, ...). This continues until all 100 people have passed through the room. What is the final state of bulb No. 64? And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the switch box internals with epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Description : Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the ... epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Last Answer : Answer: D

There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of the darkroom. One or both of the switches may control the lamp. It also could be that neither of the switches control the lamp. All you know is that the light bulb is currently off and that the lamp and bulb are in working condition. The darkroom door is closed and once you open the door you cannot touch either of the switches. If you can only open the dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Description : There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of ... dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Last Answer : Turn the first switch on and leave it on for ten minutes. After ten minutes, turn that switch off and turn the second switch on. Open the darkroom door, and lightly (in case it is hot) touch the ... one controls the lamp. If the lamp is off, and the bulb is cool, neither switch controls the lamp.

Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) algorithm, then .............. context switches are required (suppose context switch at the beginning of Ready queue and at the end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Description : Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) ... end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Last Answer : (A) 3

You are standing in front of a room with one lightbulb inside of it. You cannot see if it is on or off. Outside the room, there are 3 switches in the off positions. You may turn the switches any way you want to. You stop turning the switches, enter the room and know which switch controls the lightbulb. How? -Riddles

Description : You are standing in front of a room with one lightbulb inside of it. You cannot see if it is on or off. Outside the room, there are 3 switches in the off positions. You may turn the ... to. You stop turning the switches, enter the room and know which switch controls the lightbulb. How? -Riddles

Last Answer : You turn 2 switches 'on' and leave 1 switch 'off' and wait about a minute. Then enter the room, but just before you enter, turn one switch from 'on' to 'off'. Once in the room, feel the lightbulb - ... switch left on. If it is cold and is off, it has to be the switch you left in the off position.

Positive control of induction is best described as a control system in which an operon functions (A) Unless it is switched off by a derepressed repressor protein (B) Only after a repressor protein is inactivated by an inducer (C) Only after an inducer protein, which can be inactivated by a corepressor, switches it on (D) Only after an inducer protein, which is activated by an inducer, switch it on

Description : Positive control of induction is best described as a control system in which an operon functions (A) Unless it is switched off by a derepressed repressor protein (B) Only after a repressor protein is ... on (D) Only after an inducer protein, which is activated by an inducer, switch it on

Last Answer : Answer : D

Which of the devices shown in the illustration automatically prevents the simultaneous operation of the windlass from both master switches? EL-0073 A. Selector switch B. Contact 'CR1a' C. Contact 'CR2a' D. Contact 'CR1D'

Description : Which of the devices shown in the illustration automatically prevents the simultaneous operation of the windlass from both master switches? EL-0073 A. Selector switch B. Contact 'CR1a' C. Contact 'CR2a' D. Contact 'CR1D'

Last Answer : Answer: D

As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble pushbutton switches and drain water each week C. remove motor covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Description : As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble ... covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Last Answer : Answer: A

When the master switch for the winch shown in the illustration is in the 'off' position, and the line & safe switches are closed, which of the listed relays should be energized? EL-0102 A. 'DB' & '2T' B. 'DB' & '4M' C. 'FR-B.O.' & 'LV' D. '1M' & '1A'

Description : When the master switch for the winch shown in the illustration is in the 'off' position, and the line & safe switches are closed, which of the listed relays should be energized? EL-0102 A. 'DB' & '2T' B. 'DB' & '4M' C. 'FR-B.O.' & 'LV' D. '1M' & '1A'

Last Answer : Answer: C

A ________ switch combines crossbar switches inseveral (normally three) stages. A) multistage B) multiple crossbar C) multiple path D) none of the above

Description : A ________ switch combines crossbar switches inseveral (normally three) stages. A) multistage B) multiple crossbar C) multiple path D) none of the above

Last Answer : multistag

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layerB. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

The______electro mechanical switch (developed in 1938) had fewer moving parts than earlier switches. (A) No. 1ESS (B) Strowger (C) Step-by-step (D) Crossbar

Description : The______electro mechanical switch (developed in 1938) had fewer moving parts than earlier switches. (A) No. 1ESS (B) Strowger (C) Step-by-step (D) Crossbar

Last Answer : (D) Crossbar

The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to (a) lubricate the contacts (b) insulate the contacts from switch body (c) extinguish the arc (d) all of the above (e) none of the above

Description : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to (a) lubricate the contacts (b) insulate the contacts from switch body (c) extinguish the arc (d) all of the above (e) none of the above

Last Answer : (c) extinguish the arc

A switch tail ring counter is made by using a single D-FF. The resulting circuit is

Description : A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF

Last Answer : A switch tail ring counter is made by using a single D-FF. The resulting circuit is T-FF

Which of the following statements represents the FIRST precaution to be taken prior to working on any installed electrical component? A. Wear rubber gloves and boots. B. Use only approved nonconducting tools. C. Ground the case of the machine before beginning any repairs. D. Open the supply circuits and tag the switches.

Description : Which of the following statements represents the FIRST precaution to be taken prior to working on any installed electrical component? A. Wear rubber gloves and boots. B. Use only approved nonconducting ... the machine before beginning any repairs. D. Open the supply circuits and tag the switches.

Last Answer : Answer: D

Explain with neat labeled circuit diagram the staircase wiring in which a lamp is controlled from two different locations.

Description : Explain with neat labeled circuit diagram the staircase wiring in which a lamp is controlled from two different locations. 

Last Answer : one lamp controlled from two places: Explanation: 1. The switch S1 (two way switch is located at bottom position of the staircase. 2. The switch S2 is located at top ... the position of S2 lamp will become OFF due to current discontinuity * This process remains continuously 

I am found atop the mountains, and alongside a crag. At the end of a winding staircase, and I will accompany the plague. Who am I? -Riddles

Description : I am found atop the mountains, and alongside a crag. At the end of a winding staircase, and I will accompany the plague. Who am I? -Riddles

Last Answer : Vertigo.

Where is the dream staircase sculpture located ?

Last Answer : Located in Lalmonirhat Government College.

staircase abbreviation how is it?

Description : How do you usually abbreviate the staircase? I'd be interested in addressing an envelope.

Last Answer : The staircase is often abbreviated lph. with an abbreviation, but I think the correct abbreviation is lh.

If walking barefoot damages carpet how long would it take if one person walked barefoot up a 12 step staircase 4 times a day to damage the carpet?

Description : If walking barefoot damages carpet how long would it take if one person walked barefoot up a 12 step staircase 4 times a day to damage the carpet?

Last Answer : 15 years

Which was the Mughal emperor, who died to a’ sudden fall from the staircase,?

Description : Which was the Mughal emperor, who died to a’ sudden fall from the staircase,?

Last Answer : Humayun

In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Last Answer : Option D

Enlist different types of staircase. Explain any one type with a neat sketch.

Description : Enlist different types of staircase. Explain any one type with a neat sketch.

Last Answer : Types of Staircase: 1. Straight Stair 2. Dog legged Stair 3. Quarter turn Stair 4. Open well Stair 5. Three quarter turn Stair 6. Bifurcated Stair 7. Geometrical Stair 8. Circular ... . This well may be rectangular or of any geometrical shape and it can be used for fixing lift.

1. Which alloy is used for making magnets for hearing aids? 2. Which year is celebrated as International Year of Biodiversity? 3. The United Nations declared 2011 as which International Year? 4. Which pair of metals- are supposed to constitute the internal core of the earth? 5. Which was the Mughal emperor, who died to a’ sudden fall from the staircase,?

Description : 1. Which alloy is used for making magnets for hearing aids? 2. Which year is celebrated as International Year of Biodiversity? 3. The United Nations declared 2011 as which International Year? ... Which is the largest island? 20. With which did the Civil Disobedience Movement in India commence?

Last Answer : Answer : 1. Alinco 2. 2010 3. Forest 4. Nickel and Iron5. Humayun 6. Nerves 7. The constitutionality of laws 8. Force and Pressure 9. Cirrus 10. Sasaram 11. Decreasing 12. North-East ... Lord Hardinge 16. National Development Council 17. Acetone 18. Suez Canal 19. Kalatdeitnunat 20. The Dandi March

Staircase Wiring Practical

Description : Staircase Wiring Practical

Last Answer : Practical Significance Properly installed electrical wiring provides long service, less maintenance and safety. Therefore, it is necessary to perform wiring practice. Competency and Practical Skills ... the supply terminals available. 17. Test the circuit after approval by the teacher.

Ground wave can be used for communication upto

Last Answer : Ground wave can be used for communication upto 16 kHz.

Why do computers use binary? A. Because It's all the understand.... B. Because a computer is a series of switches, 1 being on and 0 being off C. Because they can't understand ASCII D. Because UNICODE doesn't work

Description : Why do computers use binary? A. Because It's all the understand.... B. Because a computer is a series of switches, 1 being on and 0 being off C. Because they can't understand ASCII D. Because UNICODE doesn't work

Last Answer : A. Because It's all the understand....

A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. A. the dark lamp must be replaced B. there is a ground in the line with the dark lamp C. there are grounds in two of the three phases D. the voltage to the dark lamp is less than that of the system

Description : A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. ... of the three phases D. the voltage to the dark lamp is less than that of the system

Last Answer : Answer: A

we are searching for two ground floor apartments next to each other. we need a 2bdrm and a 3 bdrm at within $500 a month. we are all disabled.?

Description : we are searching for two ground floor apartments next to each other. we need a 2bdrm and a 3 bdrm at within $500 a month. we are all disabled.?

Last Answer : I would call housing assistance and ask them if there is any way to help you find an aparment such as this , they are usually happy to help with these cases .

What are ways of cleaning the pacifier (baby drops it on floor /ground) other than use water?

Description : What are ways of cleaning the pacifier (baby drops it on floor /ground) other than use water?

Last Answer : I’ve seen a lot of mothers stick it in their own mouth to “clean” it, especially if it’s their own fairly clean floor.

Scientists have proven that cats have more hair on one side then their other side. Some people believe that this is because when cats lay on their side they need insulation from the cold on the floor or ground.Which side of a cat has more hair? -Riddles

Description : Scientists have proven that cats have more hair on one side then their other side. Some people believe that this is because when cats lay on their side they need insulation from the cold on the floor or ground.Which side of a cat has more hair? -Riddles

Last Answer : Well Duh! The outside of the Cat of course!

Can I plant an amaryllis bulb in the ground in MI and will it survive the winter?

Description : Can I plant an amaryllis bulb in the ground in MI and will it survive the winter?

Last Answer : It is a house plant and it will NOT survive the winter outside.

In a three-phase electrical system, three ground detecting lamps are provided. If all three lamps REMAIN at half-brilliance when the ground detecting test switch is operated, ______________. A. there is a slight ground on all three phases B. the switch must be replaced C. there are no grounds present D. the light bulbs are of improper voltage

Description : In a three-phase electrical system, three ground detecting lamps are provided. If all three lamps REMAIN at half-brilliance when the ground detecting test switch is operated, ______________. A. there is a ... must be replaced C. there are no grounds present D. the light bulbs are of improper voltage

Last Answer : Answer: C

If all three ground-detection lamps continue to burn at equal intensity after the test button is depressed and released, which of the listed conditions is indicated? A. No grounds exist B. All three phases are grounded C. The test switch is faulty D. The current transformers are shorted out

Description : If all three ground-detection lamps continue to burn at equal intensity after the test button is depressed and released, which of the listed conditions is indicated? A. No grounds exist B. All three phases are grounded C. The test switch is faulty D. The current transformers are shorted out

Last Answer : Answer: A

In the illustrated ground detection system with a ground on phase A, if the switch is opened __________. EL-0009 A. lamp A will dim or go out depending on the severity of the ground B. all three lamps will return to their normal brightness indicating that the bulbs are not burnt out C. lamps B and C will dim lamp A will be brighter D. lamp A will start flickering if the ground is in an AC induction motor

Description : In the illustrated ground detection system with a ground on phase A, if the switch is opened __________. EL-0009 A. lamp A will dim or go out depending on the severity of the ground B. all three ... lamp A will be brighter D. lamp A will start flickering if the ground is in an AC induction motor

Last Answer : Answer: B

On a switchboard, if all three ground detection lamps remain burning at half intensity when the test button is depressed, which of the listed conditions is indicated? A. No grounds exist. B. All three phases are grounded. C. The test switch is grounded. D. The current transformers are shorted.

Description : On a switchboard, if all three ground detection lamps remain burning at half intensity when the test button is depressed, which of the listed conditions is indicated? A. No grounds exist. B. All three phases are grounded. C. The test switch is grounded. D. The current transformers are shorted.

Last Answer : Answer: A

The final step in testing a circuit for a ground involves the use of a megohmmeter. A grounded switch or cable will be indicated by a megohmmeter reading of ____________. A. 'zero' B. infinity C. steady in the high range D. unsteady in the low range

Description : The final step in testing a circuit for a ground involves the use of a megohmmeter. A grounded switch or cable will be indicated by a megohmmeter reading of ____________. A. 'zero' B. infinity C. steady in the high range D. unsteady in the low range

Last Answer : Answer: A

What is the purpose of ground switch?

Description : What is the purpose of ground switch? 

Last Answer : To discharge the trapped electrical charges to ground to give complete isolation. (To discharge the residual potential) 

Why grounding mat is important near ground switch operating handle and disconnecting switch operating handle?

Description : Why grounding mat is important near ground switch operating handle and disconnecting switch operating handle?

Last Answer : Equipment operating handles deserve special attention because of the higher probability for co-incidence of adverse factors. For example, a. Hand operation equipment such as grounding switches and disconnecting ... both in order to bring down the values of touch potential and step potential.  

When do you see buttons in elevators "G" for Ground and when is it "1"(1st) floor?

Description : When do you see buttons in elevators "G" for Ground and when is it "1"(1st) floor?

Last Answer : And G can be for garage. I think it depends on the individual building, and how they set it up. And L can be for lobby, where 1 is for the floor above.

How do you say "keep looking at the ground don't worry about the floor" in French?

Description : How do you say "keep looking at the ground don't worry about the floor" in French?

Last Answer : “Terre” is earth; could work.

The library on the ground floor of the Mansion needs a resident librarian. I think we just got one!

Description : The library on the ground floor of the Mansion needs a resident librarian. I think we just got one!

Last Answer : Congratulations, @keobooks! Though I always think of you as Marcie. :)

How much snow has to be on the ground before you can safely jump out of a 2nd floor window?

Description : How much snow has to be on the ground before you can safely jump out of a 2nd floor window?

Last Answer : If there is enough snow on the ground to make it safe by cushioning your fall it will also have the unforeseen side effect of covering obstacles like that bird bath under the window. . OUCH! I know whereof I speak…don’t do it!

Suppose engineers are able to build a space elevator within the next 40 years, would you enter the elevator on the ground floor and press the button for floor 100,000?

Description : Suppose engineers are able to build a space elevator within the next 40 years, would you enter the elevator on the ground floor and press the button for floor 100,000?

Last Answer : Of course, as long as the chance of dying horribly was less than 10%. Even so, if something happened and you fell, that’d be one hell of a base jump. :) Or you know, Tower of Terror. Depending.

How would you know which thread is going to takeoff so you can get in on the ground floor?

Description : How would you know which thread is going to takeoff so you can get in on the ground floor?

Last Answer : Just guessing