If aggregate impact value is 20 to 30 percent, then it is classified as (A) Exceptionally strong (B) Strong (C) Satisfactory for road surfacing (D) Unsuitable for road surfacing

If aggregate impact value is 20 to 30 percent, then it is classified as
(A) Exceptionally strong
(B) Strong
(C) Satisfactory for road surfacing
(D) Unsuitable for road surfacing
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Description : The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Last Answer : Answer: Option D

When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment given is (A) Seal coat (B) Tack coat (C) Prime coat (D) Spray of emulsion

Description : When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment given is (A) Seal coat (B) Tack coat (C) Prime coat (D) Spray of emulsion

Last Answer : Answer: Option B

Log Angles machine is used to test the aggregate for (A) Crushing strength (B) Impact value (C) Abrasion resistance (D) Water absorption

Description : Log Angles machine is used to test the aggregate for (A) Crushing strength (B) Impact value (C) Abrasion resistance (D) Water absorption

Last Answer : Answer: Option C

The desirable camber for straight roads with thin bituminous surfacing, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Description : The desirable camber for straight roads with thin bituminous surfacing, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Last Answer : Answer: Option C

The suitable surfacing material for a bridge deck slab is (A) Sheet asphalt (B) Bituminous carpet (C) Mastic asphalt (D) Rolled asphalt

Description : The suitable surfacing material for a bridge deck slab is (A) Sheet asphalt (B) Bituminous carpet (C) Mastic asphalt (D) Rolled asphalt

Last Answer : Answer: Option C

The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Description : The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Last Answer : Answer: Option B

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Description : According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Last Answer : Answer: Option D

Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Description : Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Last Answer : (d) All the above

What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Last Answer : C. 40 dB

The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Description : The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Last Answer : B. 40 dB

What signal-to-noise ratio is required for satisfactory telephone services? A. 50 dB B. 30 dB C. 40dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory telephone services? A. 50 dB B. 30 dB C. 40dB D. 20 dB

Last Answer : A. 50 dB

The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Description : The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Last Answer : Answer: Option B

Most satisfactory formula for an estimate of fire demand Q for a city of population P in thousands for Indian conditions, is (A) Q = 1115 (p/5 + 20) (B) Q = 1640 P (1 - 0.01 P) (C) Q = 3180 P (D) None of these

Description : Most satisfactory formula for an estimate of fire demand Q for a city of population P in thousands  for Indian conditions, is  (A) Q = 1115 (p/5 + 20)  (B) Q = 1640 P (1 - 0.01 P)  (C) Q = 3180 P (D) None of these 

Last Answer : (C) Q = 3180 P

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Description : An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Last Answer : (C) 40

A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will (A) Reduce by 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Last Answer : (A) Reduce by 200 kg

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

What if your new material may aggregate or bring together pieces of information that are not in themselves classified but when you present them together they render your new material classified?

Description : What if your new material may aggregate or bring together pieces of information that are not in themselves classified but when you present them together they render your new material classified?

Last Answer : Your new material may aggregate, or bring together, pieces of information that are not individually classified, but when presented together they render your new material classified. This classification concept is called _______.Revealed byContained inDirected byClassification by Compilation

The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Description : An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Last Answer : Answer: Option D

The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Description : The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Last Answer : (B) Fine sandy strata

Percussion drilling is unsuitable in (A) Unconsolidated sand (B) Unconsolidated gravel (C) Quick sand (D) Consolidated rocks

Description : Percussion drilling is unsuitable in  (A) Unconsolidated sand  (B) Unconsolidated gravel  (C) Quick sand  (D) Consolidated rocks 

Last Answer : (D) Consolidated rocks 

Concrete is unsuitable for compaction by a vibrator if it is (A) Dry (B) Earth moist (C) Semi-plastic (D) Plastic

Description : Concrete is unsuitable for compaction by a vibrator if it is (A) Dry (B) Earth moist (C) Semi-plastic (D) Plastic

Last Answer : Answer: Option D

For light and ornamental casting, the most unsuitable pig iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : For light and ornamental casting, the most unsuitable pig iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option D

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

Concrete is unsuitable for compaction by vibration if it is [ A ] Semi – plastic [ B ] Plastic [ C ] Earth moist [ D ] Dry

Description : Concrete is unsuitable for compaction by vibration if it is [ A ] Semi – plastic [ B ] Plastic [ C ] Earth moist [ D ] Dry

Last Answer : [ B ] Plastic

The aggregate plann The aggregate planning strategy that is most likely ing strategy that is most likely to impact the prod to impact the productivity of ity of manufacturing workers, adversely, is: a)Hiring of temporary workers b)Use of overtime c)Layoff of workers d)Building anticipation inventory

Description : The aggregate plann The aggregate planning strategy that is most likely ing strategy that is most likely to impact the prod to impact the productivity of ity of manufacturing workers, adversely, ... )Hiring of temporary workers b)Use of overtime c)Layoff of workers d)Building anticipation inventory

Last Answer : d)Building anticipation inventory

Given the supply quantity which is fixed an increase in aggregate demand will have direct impact on (a) Increase in GDP ; (b) Inflationary pressure ; (c) Greater employment opportunity; (d) More equitable distribution of income and wealth

Description : Given the supply quantity which is fixed an increase in aggregate demand will have direct impact on (a) Increase in GDP ; (b) Inflationary pressure ; (c) Greater employment opportunity; (d) More equitable distribution of income and wealth 

Last Answer : (b) Inflationary pressure ;

An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 m

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Description : Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Last Answer : (D) All of the above

Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Description : Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Last Answer : Answer: Option B

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Description : On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Last Answer : Answer: Option C

The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Description : The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Last Answer : Answer: Option A

To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Description : To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Last Answer : Answer: Option D

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Description : Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Last Answer : Answer: Option C

The decision of competent authority that DO(PLI) procuring effective business to the tune of ____ or more shall no be eligible for automatic extension of tenure for the next ___ year. Such extension will be granted by ______subject to good work,conduct & satisfactory record in the year. a) 10 crores, 1 year, Head of the circle, b) 20 crores, 2 year, DG Post c) 25 crores, 1 year, Head of the circle d) 25 cores. 1 years, SSP/SP

Description : The decision of competent authority that DO(PLI) procuring effective business to the tune of ____ or more shall no be eligible for automatic extension of tenure for the next ___ year. Such extension will be granted by ... Post c) 25 crores, 1 year, Head of the circle d) 25 cores. 1 years, SSP/SP

Last Answer : c) 25 crores, 1 year, Head of the circle

If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a (A) Simply supported beam (B) Continuous beam (C) Cantilever beam (D) None of these

Description : If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a (A) Simply supported beam (B) Continuous beam (C) Cantilever beam (D) None of these

Last Answer : Answer: Option C

Vertical drop fall is satisfactory for a height upto (A) 0.5 m (B) 1.5 m (C) 3.5 m (D) 5.0 m

Description : Vertical drop fall is satisfactory for a height upto (A) 0.5 m (B) 1.5 m (C) 3.5 m (D) 5.0 m

Last Answer : Answer: Option B

The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Description : The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option C

Is this 8 yr. old exceptionally tall to reach the brakes of the car right?

Description : Is this 8 yr. old exceptionally tall to reach the brakes of the car right?

Last Answer : Is this a random question or do you have a story that goes with this question?

Can you explain the appeal of exceptionally loud motorcycles?

Description : Can you explain the appeal of exceptionally loud motorcycles?

Last Answer : answer:My guess: “thwaaARRPPpp” = “Hey look at my super motorcycle! It’s awesome!” “thwaaARRPPpp” = “This motorcycle has one of the most badass machine ever! It will disappear and you will get all the smoke a second after it starts!” —-> The louder the better.

Where can I find a photograph of King Edward VIII (possibly while he was still Prince of Wales) wearing a total mishmash of clothing -- stripes, polka dots, etc? He was looking exceptionally smug.

Description : Where can I find a photograph of King Edward VIII (possibly while he was still Prince of Wales) wearing a total mishmash of clothing -- stripes, polka dots, etc? He was looking exceptionally smug.

Last Answer : In this photo, he is wearing striped socks with a checked suit.

Do you think you are exceptionally curious?

Description : Do you think you are exceptionally curious?

Last Answer : Yes, I think so. Why do you ask?