The value fineness modules for fin sand is (a) 1.1 to 1.3 (b) 1.3 to 1.6 (c)1.6 to 2.2 (d) 2.2 to 2.6

The value fineness modules for fin sand is
(a) 1.1 to 1.3
(b) 1.3 to 1.6
(c)1.6 to 2.2
(d) 2.2 to 2.6
by

1 Answer

Answer :

(d) 2.2 to 2.6
by

Related questions

If th fineness modules of sand is 3, then the sand is graded as (a) Very fine sand (b) Fine sand (c)Medium sand (d) Coarse sand

Description : If th fineness modules of sand is 3, then the sand is graded as (a) Very fine sand (b) Fine sand (c)Medium sand (d) Coarse sand

Last Answer : (d) Coarse sand

Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above

Description : Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above

Last Answer : Answer: Option D

If fineness modulus of sand is 2.5, it is graded as (A) Very fine sand (B) Fine sand (C) Medium sand (D) Coarse

Description : If fineness modulus of sand is 2.5, it is graded as (A) Very fine sand (B) Fine sand (C) Medium sand (D) Coarse

Last Answer : Answer: Option B

Sand that is recommended for R.C.C work should have fineness modulus. (a) 0-2 (b) 2-3.5 (c) 3-4.5 (d) 4-5

Description : Sand that is recommended for R.C.C work should have fineness modulus. (a) 0-2 (b) 2-3.5 (c) 3-4.5 (d) 4-5

Last Answer : (b) 2-3.5

A sand sample has a fineness modulus of 1.95. Whether this sand can be used for concreting? Explain the procedure to bring the fineness modulus in required permissible limits. State its importance.

Description : A sand sample has a fineness modulus of 1.95. Whether this sand can be used for concreting? Explain the procedure to bring the fineness modulus in required permissible limits. State its importance.

Last Answer : The given sand sample has a fineness modulus 1.95, which is less than prescribed limit i.e.2.2-3.2. It indicates that sand particles are finer, which is not suitable for satisfactory ... . Well graded sand is also useful for good bonding of particles and related strength criteria of concrete.

The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Description : The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Last Answer : (a) Fineness

The fineness modulus of fine aggregate is in the range of (A) 2.0 to 3.5 (B) 3.5 to 5.0 (C) 5.0 to 7.0 (D) 6.0 to 8.5

Description : The fineness modulus of fine aggregate is in the range of (A) 2.0 to 3.5 (B) 3.5 to 5.0 (C) 5.0 to 7.0 (D) 6.0 to 8.5

Last Answer : (A) 2.0 to 3.5

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

Match the following columns and select the correct option. Column-I Column-II (A) 6-15 pairs of gill slits (i) Trygon (B) Heterocercal caudal fin (ii) Cyclostomes (C) Air bladder (iii) Chondrichthyes (D) Poison sting (iv) Osteichthyes(A) (B) (C) (D) (a) (ii) (iii) (iv) (i) (b) (iii) (iv) (i) (ii) (c) (iv) (ii) (iii) (i) (d) (i) (iv) (iii) (ii)

Description : Match the following columns and select the correct option. Column-I Column-II (A) 6-15 pairs of gill slits (i) Trygon (B) Heterocercal caudal fin (ii) Cyclostomes (C) Air bladder (iii) Chondrichthyes (D) Poison sting (iv) Osteichthyes ... (i) (ii) (c) (iv) (ii) (iii) (i) (d) (i) (iv) (iii) (ii)

Last Answer : (a) (ii) (iii) (iv) (i)

An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

Vicat's apparatus is used for (A) Fineness test (B) Consistency test (C) Setting time test (D) Soundness test

Description : Vicat's apparatus is used for (A) Fineness test (B) Consistency test (C) Setting time test (D) Soundness test

Last Answer : (B) Consistency test

Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Description : Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Last Answer : (B) Increase in fineness of cement

If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P) of fine aggregates to combined aggregates, is (A) P = [(Z - X)/(Z - Y)] × 100 (B) P = [(X - Z)/(Z - Y)] × 100 (C) P = [(X - Z)/(Z + Y)] × 100 (D) P = [(Z + X)/(Z - Y)] × 100

Description : If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P) of fine aggregates to combined aggregates, is (A) P = [(Z - X)/(Z - Y)] × 100 (B) P = [(X - Z)/(Z - Y)] × 100 (C) P = [(X - Z)/(Z + Y)] × 100 (D) P = [(Z + X)/(Z - Y)] × 100

Last Answer : Option B

Vicat apparatus is used for (A) Fineness test (B) Consistency test (C) Test for setting time (D) Test for tensile strength

Description : Vicat apparatus is used for (A) Fineness test (B) Consistency test (C) Test for setting time (D) Test for tensile strength

Last Answer : Answer: Option B

C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of cement (C) The phenomenon by virtue of which cement does not allow transmission of sound, is known as soundness of cement (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Description : Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Last Answer : (d) All of these

Too much fineness of cement (a) Results cracks in concrete (b) Generates greater heat (c) Develops later strength (d) All the above

Description : Too much fineness of cement (a) Results cracks in concrete (b) Generates greater heat (c) Develops later strength (d) All the above

Last Answer : (d) All the above

Le-chatelier apparatus is used for [ A ] Fineness test [ B ] Consistency test [ C ] Soundness test [ D ] Compressive strength test

Description : Le-chatelier apparatus is used for [ A ] Fineness test [ B ] Consistency test [ C ] Soundness test [ D ] Compressive strength test

Last Answer : [ C ] Soundness test

In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Last Answer : [ B ] 10%

The modular ratio is the ration of (a) Young’s modulus of steel to the young’s modulus of concrete (b) Young’s modules of concrete to the young’s modulus of steel (c) Load carried by steel to the load carried by concrete. (d) Load carried by concrete to the load carried by step.

Description : The modular ratio is the ration of (a) Young’s modulus of steel to the young’s modulus of concrete (b) Young’s modules of concrete to the young’s modulus of steel (c) Load carried by steel to the load carried by concrete. (d) Load carried by concrete to the load carried by step.

Last Answer : (c) Load carried by steel to the load carried by concrete.

The modules of elasticity of steel shall be taken as (a) 100kN/mm2 (b) 200 kN/mm2 (c) 250 kN/mm2 (d) 300 kN/mm2

Description : The modules of elasticity of steel shall be taken as (a) 100kN/mm2 (b) 200 kN/mm2 (c) 250 kN/mm2 (d) 300 kN/mm2

Last Answer : (b) 200 kN/mm2

What do you think about a single blue fin tuna selling for $3.1 million in Japan?

Description : What do you think about a single blue fin tuna selling for $3.1 million in Japan?

Last Answer : I don’t know about this case, but in the Netherlands, every new herring season, the first bucket full of herrings is auctioned off as well, and there the money being paid by the restaurant is going to charity. The restaurant had publicity out of it.

Any advice for combatting fin rot in a betta fish?

Description : Any advice for combatting fin rot in a betta fish?

Last Answer : They sell antibiotics in most fish stores to treat it. I think it’s bacteria that cause the problem.

what- clint's boat has a triangular fin, as shown?

Description : what- clint's boat has a triangular fin, as shown?

Last Answer : m

A particle of mass `m` moves along a circular orbit in centrosymmetrical potential field `U(r )=kr^(2)//2`. Using the Bohr quantization condition, fin

Description : A particle of mass `m` moves along a circular orbit in centrosymmetrical potential field `U(r )=kr^(2)//2`. Using the Bohr quantization condition, fin

Last Answer : A particle of mass `m` moves along a circular orbit in centrosymmetrical potential field `U(r ... orbital radii and energy levels to that particle.

Who has been appointed as the head of Working Group on Fin Tech and Digital Banking by RBI? A) NS Vishwanathan B) KR Subramaniam C) Sarvesh Rana D) NS Iyer E) Sudarshan Sen

Description : Who has been appointed as the head of Working Group on Fin Tech and Digital Banking by RBI? A) NS Vishwanathan B) KR Subramaniam C) Sarvesh Rana D) NS Iyer E) Sudarshan Sen

Last Answer : E) Sudarshan Sen Explanation: The Reserve Bank of India (RBI) has set up an inter-regulatory Working Group to study the regulatory issues relating to Financial Technology (Fintech) and Digital ... Working Group will be headed by RBI s Executive Director Sudarshan Sen and consist of 12 members.

Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the (A) Surrounding temperature (B) Average temperature of the fin (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Description : Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer ... (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Last Answer : (D) Constant temperature equal to that of the base

Air is best heated with steam in a heat exchanger of (A) Plate type (B) Double pipe type with fin on steam side (C) Double pipe type with fin on air side (D) Shell and tube type

Description : Air is best heated with steam in a heat exchanger of (A) Plate type (B) Double pipe type with fin on steam side (C) Double pipe type with fin on air side (D) Shell and tube type

Last Answer : (C) Double pipe type with fin on air side

Which of the following structures is homologous to the wing of a bird? (a) Hindlimb of rabbit (b) Flipper of whale (c) Dorsal fin of a shark (d) Wing of a moth

Description : Which of the following structures is homologous to the wing of a bird? (a) Hindlimb of rabbit (b) Flipper of whale (c) Dorsal fin of a shark (d) Wing of a moth

Last Answer : (b) Flipper of whale

Is it advisable to cool a fin fan by spraying demineralized water on it?

Description : Is it advisable to cool a fin fan by spraying demineralized water on it?

Last Answer : Fin fan has carbon steel tubes with aluminum fins RESPONSE In a similar service, the fin fan suffered external corrosion when spraying it with demin water. The salt and oxygen in the air ... , which should significantly lower the likelihood of cold ambient temperature causing the gas to condense.

Main advantage of 3-piece P F Mould is? (i) To overcome fin defect.* (ii) To prevent the flaw of molten metal (iii) To make proper weld size (iv) None to the above

Description : Main advantage of 3-piece P F Mould is? (i) To overcome fin defect.* (ii) To prevent the flaw of molten metal (iii) To make proper weld size (iv) None to the above

Last Answer : (i) To overcome fin defect.*

The boiling point of normal paraffinic (pron: pair-ah-FIN-ik) hydrocarbons increases with the number of carbon atoms per molecule. What is the smallest number of carbon atoms a normal paraffinic hydrocarbon can have and still be a liquid at room temperature (70-75 degrees Fahrenheit) and 1 atmosphere pressure.

Description : The boiling point of normal paraffinic (pron: pair-ah-FIN-ik) hydrocarbons increases with the number of carbon atoms per molecule. What is the smallest number of carbon atoms a normal paraffinic ... and still be a liquid at room temperature (70-75 degrees Fahrenheit) and 1 atmosphere pressure.

Last Answer : ANSWER: FIVE

Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Description : Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Last Answer : (A) FIN 

In male sharks, Claspers are found attached to (1) Anal fin (2) Pectoral fin (3) Pelvic fin (4) Ventral fin

Description : In male sharks, Claspers are found attached to (1) Anal fin (2) Pectoral fin (3) Pelvic fin (4) Ventral fin

Last Answer : Pelvic fin

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Description : Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2 /gm. (A) 800 (B) 1600 (C) 4000 (D) 8500

Description : The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2 /gm. (A) 800 (B) 1600 (C) 4000 (D) 8500

Last Answer : (B) 1600

Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Description : Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Last Answer : Option C

Explain the procedure to determine fineness of cement by dry sieving method. State its IS requirement.

Description : Explain the procedure to determine fineness of cement by dry sieving method. State its IS requirement.

Last Answer : Procedure to determine fineness of cement by dry sieving method: 1. Take the 100 gm of cement sample given using balance as initial weight as W1 gm. 2. Take 90 micron IS sieve and keep pan at bottom. 3. Place the ... . ii) Rapid hardening Cement (RHC): 5 % max. iii) Low Heat Cement (LHC): 5 % max.

Define fineness of cement.

Description : Define fineness of cement.

Last Answer : Fineness of cement: It is the degree of grinding of cement particles during its manufacturing process, called as fineness of cement.  OR  It is the measurement of size of particles, called as fineness of cement. 

Suggest me a good book on SAP software which can contain the different modules of SAP?

Description : Suggest me a good book on SAP software which can contain the different modules of SAP?

Last Answer : http://www.humanfactors.com/downloads/documents/SAP-case-study.pdf

Do chip modules work?

Description : Do chip modules work?

Last Answer : answer:I do not know if they work. However, if altering the computer settings could increase horsepower and gas mileage (both things that are heavily marketed from mfgs), why wouldn't the mfgs just ... car not pass inspection) or shortening the life of certain components. There's no free lunch =)

If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Description : If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Last Answer : b.modules

What are modules and arguments ?

Description : What are modules and arguments ?

Last Answer : The value of the vector is called modulus and the angle is called argument.

How do WiFi modules turn light fiber data into computer understanding signals?

Description : How do WiFi modules turn light fiber data into computer understanding signals?

Last Answer : the module has a thingy that transfers it into data!!!!!

What memory technology allows two memory modules to be accessed at the same time?

Description : What memory technology allows two memory modules to be accessed at the same time?

Last Answer : What is the answer ?