The steel mould used for slump test is in the form of a (a) Cube (b) Cylinder (c) Frustrum of a cone (d) None of these

The steel mould used for slump test is in the form of a
(a) Cube
(b) Cylinder
(c) Frustrum of a cone
(d) None of these
by

1 Answer

Answer :

(c) Frustrum of a cone
by

Related questions

The top diameter, bottom diameter and height of the mould used for slump test are (a) 100mm, 200mm, 300mm (b) 200mm,100mm,300mm (c) 200mm,300mm,100mm (d) 100mm,300mm,200mm

Description : The top diameter, bottom diameter and height of the mould used for slump test are (a) 100mm, 200mm, 300mm (b) 200mm,100mm,300mm (c) 200mm,300mm,100mm (d) 100mm,300mm,200mm

Last Answer : (a) 100mm, 200mm, 300mm

Workability of a concrete – mix is determined by (i)Slump cone test (ii)Compaction factor test (iii)Vee bee test [ A ] i [ B ] ii [ C ] i and ii [ D ] i, ii and iii

Description : Workability of a concrete – mix is determined by (i)Slump cone test (ii)Compaction factor test (iii)Vee bee test [ A ] i [ B ] ii [ C ] i and ii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Last Answer : [ C ] Compaction factor test

While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Description : While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Last Answer : [ B ] More accurate

Slump cone test is used to determine [ A ] Shrinkage of concrete mix [ B ] Creep of concrete [ C ] Workability of concrete mix [ D ] Soundness of concrete

Description : Slump cone test is used to determine [ A ] Shrinkage of concrete mix [ B ] Creep of concrete [ C ] Workability of concrete mix [ D ] Soundness of concrete

Last Answer : [ C ] Workability of concrete mix

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

The top diameter, bottom diameter and the height of a slump mould are: (A) 10 cm, 20 cm, 30 cm (B) 10 cm, 30 cm, 20 cm (C) 20 cm, 10 cm, 30 cm (D) 20 cm, 30 cm, 10 cm

Description : The top diameter, bottom diameter and the height of a slump mould are: (A) 10 cm, 20 cm, 30 cm (B) 10 cm, 30 cm, 20 cm (C) 20 cm, 10 cm, 30 cm (D) 20 cm, 30 cm, 10 cm

Last Answer : (A) 10 cm, 20 cm, 30 cm

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

For performing the compressive strength test of cement, the size of cube mould should be (a) 7.06cm (b)75mm (c)80mm (d)All the above

Description : For performing the compressive strength test of cement, the size of cube mould should be (a) 7.06cm (b)75mm (c)80mm (d)All the above

Last Answer : (a) 7.06cm

A cylinder is within the cube touching all the vertical faces. A cone is inside the cylinder. If their heights are same with -Maths 9th

Description : A cylinder is within the cube touching all the vertical faces. A cone is inside the cylinder. If their heights are same with -Maths 9th

Last Answer : answer:

Explain the procedure for measurement of workability of fresh concrete using slump cone test.

Description : Explain the procedure for measurement of workability of fresh concrete using slump cone test.

Last Answer : Test Procedure: i. Clean the mould from inside and apply oil to it. ii. Place the mould on smooth horizontal, rigid & non-absorbent surface or the centre of metallic tray. iii. Fill the mould ... top of cone. vi. Based on measured slump, the degree of workability is designated as follows.

In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Description : If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Last Answer : This is a very classical question raised by many graduate engineers. In fact, there are two schools of thought regarding this issue. The first school of thought is rather straightforward: the contractor ... t the Engineer exercise his power to stop the contractor and save these extra time and cost?

Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Description : Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Last Answer : (A) Consistency

Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Description : Slump test of concrete is a measure of its (A) Consistency (B) Compressive strength (C) Tensile strength (D) Impact value

Last Answer : (A) Consistency

Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete

Description : Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete

Last Answer : Answer: Option D

Workability of concrete is measured by (A) Vicat apparatus test (B) Slump test (C) Minimum void method (D) Talbot Richa

Description : Workability of concrete is measured by (A) Vicat apparatus test (B) Slump test (C) Minimum void method (D) Talbot Richa

Last Answer : Answer: Option B

Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Slump test for concrete is carried out, to determine (A) Strength (B) Durability (C) Workability (D) Water content

Description : Slump test for concrete is carried out, to determine (A) Strength (B) Durability (C) Workability (D) Water content

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

The slump test of concrete is used to measure its (a) Consistency (b) Mobility (c) Homogeneity (d) All the above

Description : The slump test of concrete is used to measure its (a) Consistency (b) Mobility (c) Homogeneity (d) All the above

Last Answer : (a) Consistency

Slump test of concrete is a measure of its [ A ] Consistency [ B ] Compressive strength [ C ] Tensile strength [ D ] Impact value

Description : Slump test of concrete is a measure of its [ A ] Consistency [ B ] Compressive strength [ C ] Tensile strength [ D ] Impact value

Last Answer : [ A ] Consistency

Find the radius of the largest right circular cone that can be cut out from a cube of edge 4.2 cm. -Maths 10th

Description : Find the radius of the largest right circular cone that can be cut out from a cube of edge 4.2 cm. -Maths 10th

Last Answer : Radius of the largest right circular cone 1/2 (Edge of the Square) =4.2/2 = 2.1 cm

There are two identical cubes. Out of one cube, a sphere of maximum volume (VS) is cut off. Out of the second cube, a cone of maximum volume -Maths 9th

Description : There are two identical cubes. Out of one cube, a sphere of maximum volume (VS) is cut off. Out of the second cube, a cone of maximum volume -Maths 9th

Last Answer : answer:

In the following question, select the odd word from the given alternatives. Options: 1) Cuboid 2) Cone 3) Triangle 4) Cube

Description : In the following question, select the odd word from the given alternatives.  Options: 1) Cuboid 2) Cone 3) Triangle 4) Cube 

Last Answer : Correct Answer: Triangle 

In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Description : In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Last Answer : d.Circle

A cone, a hemisphere and a cylinder -Maths 9th

Description : A cone, a hemisphere and a cylinder -Maths 9th

Last Answer : V1 (volume of cone) = 1/3 πr2r V2 (volume of hemisphere) = 2/3 πr3 V3 (volume of cylinder) = πr2 .r V1: V2: V3 = 1/3 πr3 : 2/3πr3 : πr3 = 1/3 : 2/3 : 1 V 1: V 2: V 3 = 1 : 2 : 3

A cylinder and a cone have equal -Maths 9th

Description : A cylinder and a cone have equal -Maths 9th

Last Answer : Curved surface area of cylinder/Curved surface area of cone = 2πrh/πrl = 2πrh/πr root under√(r2 + h2) 8/5 = 2h/root under√(r2 + h2) ⇒ 64/25 = 4h2/r2 + h2 ⇒ 64r2 + 64h2 = 100 h2 ⇒ 64r2 = 100h2 - 64h2 ⇒ 64r2 = 36h2 ⇒ r2/h2 = 36/64 = 9/16 ⇒ r/h = 3/4 ∴ r : h = 3 : 4

A cylinder, a cone and a sphere are of the same radius -Maths 9th

Description : A cylinder, a cone and a sphere are of the same radius -Maths 9th

Last Answer : Let r be the common radius of a cylinder, cone and a sphere. Then, height of the cylinder = Height of the cone = Height of the sphere = 2r Let 'I' be the slant height of the cone. Then l = root under( √r2 + h2) = root under( ... , S1 : S2 :S3 = 4 πr2 : √5 πr2 : 4 πr2 ∴ S1 : S2 : S3 = 4 : √5 : 4

A right circular cylinder and a right circular cone have equal bases and equal volumes. But the lateral surface area of the right circular cone is -Maths 9th

Description : A right circular cylinder and a right circular cone have equal bases and equal volumes. But the lateral surface area of the right circular cone is -Maths 9th

Last Answer : answer:

A sphere, a cylinder and a cone respectively are of the same radius and same height. Find the ratio of their curved surfaces. -Maths 9th

Description : A sphere, a cylinder and a cone respectively are of the same radius and same height. Find the ratio of their curved surfaces. -Maths 9th

Last Answer : answer:

A right circular solid cone of maximum possible volume is cut off from a solid metallic right circular cylinder of volume V. -Maths 9th

Description : A right circular solid cone of maximum possible volume is cut off from a solid metallic right circular cylinder of volume V. -Maths 9th

Last Answer : answer:

A solid right circular cylinder of radius 8 cm and height 2 cm is melted and cast into a right circular cone of height 3 times that of the cylinder. -Maths 9th

Description : A solid right circular cylinder of radius 8 cm and height 2 cm is melted and cast into a right circular cone of height 3 times that of the cylinder. -Maths 9th

Last Answer : Height of cone = 3 times height of cylinder = 3 3 = 9 cm Volume of cylinder = volume of cone r2 = 8 8 r = 8 cm l2 = h2 + r2 = (9)2 + (8)2 l = = 12 cm C.S.A (cone) = = 301.71 cm2

For a two stage compressor, the ratio of diameter of low pressure cylinder to high pressure cylinder is equal to A. Square of the ratio of final pressure to initial pressure B. The ratio of final pressure to initial pressure C. The square root of the ratio of final pressure to initial pressure D. Cube root of the ratio of final pressure to initial pressure

Description : For a two stage compressor, the ratio of diameter of low pressure cylinder to high pressure cylinder is equal to A. Square of the ratio of final pressure to initial pressure B. The ratio of ... final pressure to initial pressure D. Cube root of the ratio of final pressure to initial pressure

Last Answer : ANSWER : C

Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere(B) Cube(C) Cylinder (L/D = 1)(D) Raschig rings

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

The Gaussian surface for a point charge will be a) Cube b) Cylinder c) Sphere d) Cuboid

Description : The Gaussian surface for a point charge will be a) Cube b) Cylinder c) Sphere d) Cuboid

Last Answer : c) Sphere

The Gaussian surface for a line charge will be a) Sphere b) Cylinder c) Cube d) Cuboid

Description : The Gaussian surface for a line charge will be a) Sphere b) Cylinder c) Cube d) Cuboid

Last Answer : b) Cylinder

A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Last Answer : d Soft centre steel

.The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Last Answer : d) Soft centre steel

Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

What Are The Different Type Of Slump Test Indications?

Description : What Are The Different Type Of Slump Test Indications?

Last Answer : Answer : Slump tests are performed to empirically measure the work ability of fresh concrete. It is used to measure the consistency of the concrete. In general there are three different types of slumps that ... the mix of concrete is simply too wet. The mix is considered to be harsh and lean.

What is the indication of shear slump and collapse slump in slump tests?

Description : What is the indication of shear slump and collapse slump in slump tests?

Last Answer : There are three types of slump that may occur in slumps test, namely, true slump, shear slump and collapse slump. True slump refers to general drop of the concrete mass ... concrete. Collapse slump indicates that concrete mix is too wet ad the mix is deemed to be harsh and lean.

To indicate proper control of consistency of a freshly mixed concrete for pavement construction, the slump should be between (A) 3 to 5 cm (B) 4 to 6 cm (C) 5 to 7 cm(D) 7 to 10 cm

Description : To indicate proper control of consistency of a freshly mixed concrete for pavement construction, the slump should be between (A) 3 to 5 cm (B) 4 to 6 cm (C) 5 to 7 cm (D) 7 to 10 cm

Last Answer : Answer: Option D

If the slump of a concrete mix is 60 mm, its workability is (A) Very low (B) Low (C) Medium (D) High

Description : If the slump of a concrete mix is 60 mm, its workability is (A) Very low (B) Low (C) Medium (D) High

Last Answer : Answer: Option C

While compacting the concrete by a mechanical vibrator, the slump should not exceed (A) 2.5 cm (B) 5.0 cm (C) 7.5 cm (D) 10 cm

Description : While compacting the concrete by a mechanical vibrator, the slump should not exceed (A) 2.5 cm (B) 5.0 cm (C) 7.5 cm (D) 10 cm

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the concrete (C) The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

A concrete having a slump of 6.5 cm, is said to be (A) Dry (B) Earth moist (C) Semi-plastic (D) Plastic

Description : A concrete having a slump of 6.5 cm, is said to be (A) Dry (B) Earth moist (C) Semi-plastic (D) Plastic

Last Answer : Answer: Option D