The output from a power shovel is 144 cum/hr. The required number of trucks of 12 cum capacity each with 16 minute cycle time and with 80% operating efficiency will be (a) 5 (b) 4 (c) 3 (d) 2

The output from a power shovel is 144 cum/hr. The required number of trucks of 12 cum capacity each with 16 minute cycle time and with 80% operating efficiency will be
(a) 5 (b) 4 (c) 3 (d) 2
by

1 Answer

Answer :

(c) 3
by

Related questions

Assertion A: For a given depth of cut, the output of a power shovel can be increased by decreasing the angle of swing. Reason R: If the angle of swing is decreased, the cycle time will be decreased. Select the correct answer. (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: For a given depth of cut, the output of a power shovel can be increased by decreasing the angle of swing. Reason R: If the angle of swing is decreased, the cycle time will be decreased. Select the ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Description : A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Last Answer : b) 10.09 kW

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Description : For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Last Answer : (A) Moist loam

A motorboat can cover 80 km upstream and 120 km downstream together in 26 hours. Also it can cover 100 km upstream and 144 km downstream together in 32 hours. What is the speed of the motorboat in still water? A) 12 km/hr B) 15km/hr C) 8.5km/hr D) 19km/hr

Description : A motorboat can cover 80 km upstream and 120 km downstream together in 26 hours. Also it can cover 100 km upstream and 144 km downstream together in 32 hours. What is the speed of the motorboat in still water? A) 12 km/hr B) 15km/hr C) 8.5km/hr D) 19km/hr 

Last Answer : ANSWER :C Explanation:  Upstream speed in both cases is 80 and 100.  Ratio is 80 : 100 = 8:10 = 4 : 5.  So let times in both cases be 4x and 5x  Downstream speed in both cases is 120 and 144 resp.  Ratio is ... 12 km/hr  So speed of boat = 1/2 * (5+12) =17/2km/hr  speed of boat = 8.5 km/hr

A tractor shovel has a purchase price of Rs. 4.7 lacs and could save the organization an amount of rupees one lac per year on operating costs. The salvage value after the amortization period is 10% of the purchase price. The capital recovery period will be (A) 3.7 years (B) 4.23 years (C) 5 years (D) 7.87 years

Description : A tractor shovel has a purchase price of Rs. 4.7 lacs and could save the organization an amount of rupees one lac per year on operating costs. The salvage value after the amortization period is 10% of the purchase price. The ... will be (A) 3.7 years (B) 4.23 years (C) 5 years (D) 7.87 years

Last Answer : (B) 4.23 years

Efficiency of a Carnot engine is given as 80%. If the- cycle direction be reversed, what will be the value of COP ofreversed Carnot cycle (a) 1.25 (b) 0.8 (c) 0.5 (d) 0.25

Description : Efficiency of a Carnot engine is given as 80%. If the- cycle direction be reversed, what will be the value of COP ofreversed Carnot cycle (a) 1.25 (b) 0.8 (c) 0.5 (d) 0.25

Last Answer : Ans: d

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Description : A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Last Answer : ANSWER: Z -- 80%

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

X,Y and Z can do a certain job in 72,108 and 144 days respectively. They started the job but X left 16 days before the completion of the job while Y left 24 days before the completion. The number of days for which Z worked is. a) 12 days b) 24 days c) 36 days d) 48 days

Description : X,Y and Z can do a certain job in 72,108 and 144 days respectively. They started the job but X left 16 days before the completion of the job while Y left 24 days before the completion. The number of days for which Z worked is. a) 12 days b) 24 days c) 36 days d) 48 days

Last Answer : D Suppose the work was finished in a' days Then X's (a - 16) day's work + Y's (a - 24) days + Z's a days work = 1 (a-16)/72 + (a-24)/108 + a/144 =1 lcm of 72,108,144 is 432 (6(a-16) + 4( ... = 432 6a - 96 +4a - 96 =3a = 432 13a - 192 = 432 13a = 624 => a =48 Therefore Z worked in 48 days.

2 pistol were shoot from the same place at an interval of 15 mins and 15 secs but a boy in the train approaching the place hears the second shot 15 mins after the first. The speed of the train(in km/hr),supposing that speed travels at 320 metres per second is. a) 15.166 b) 17.144 c) 18.563 d) 19.188

Description : 2 pistol were shoot from the same place at an interval of 15 mins and 15 secs but a boy in the train approaching the place hears the second shot 15 mins after the first. The speed of the train(in km/hr),supposing that speed travels at 320 metres per second is. a) 15.166 b) 17.144 c) 18.563 d) 19.188

Last Answer : D Let the speed of the train be x m/sec Then distance travelled by the train in 15mins = distance travelled by sound in 15secs X*15*60 = 320*15 900x = 4800 X=4800/900 X=5.33 Speed of the train 5.33 m/s Convert m/s into km/hr 5.33m =(5.33*18/5) =(95.94/5) =19.188 km/hr

Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Description : Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Last Answer : (D) 98% to 99%

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

What is the name of Indian Aerostat of 2000 cum capacity? (a) Rustom (b) Mareech (c) Akashdeep (d) BrahMos

Description : What is the name of Indian Aerostat of 2000 cum capacity? (a) Rustom (b) Mareech (c) Akashdeep (d) BrahMos

Last Answer : c) Akashdeep

If the effective working time is 7 hours and per batch time of concrete is 3 minutes, the output of a concrete mixer of 150 litre capacity, is (A) 15,900 litres (B) 16,900 litres (C) 17,900 litres (D) 18,900 litres

Description : If the effective working time is 7 hours and per batch time of concrete is 3 minutes, the output of a concrete mixer of 150 litre capacity, is (A) 15,900 litres (B) 16,900 litres (C) 17,900 litres (D) 18,900 litres

Last Answer : (D) 18,900 litres

To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current contract. c. all strike settlements should be halfway between the demand and the negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Description : To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current ... negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Last Answer : c. all strike settlements should be halfway between the demand and the negotiation ceiling.

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

The main reinforcement of a R.C. slab consists of 10 mm bars at 100 mm spacing; if it is desired to replace the 10 mm bars by 12 mm bars, then the spacing of 12mm bars should be (a) 120 mm (b) 140 mm (c ) 144 mm (d) 160mm

Description : The main reinforcement of a R.C. slab consists of 10 mm bars at 100 mm spacing; if it is desired to replace the 10 mm bars by 12 mm bars, then the spacing of 12mm bars should be (a) 120 mm (b) 140 mm (c ) 144 mm (d) 160mm

Last Answer : (c ) 144 mm

Each side of an equilateral triand 12 is \( 24 cm \) the mid - point of its sides are joined to form another tranpla this brress is doins centinuously infinite46. The perimeter of 7 th triangle is \( ( \) in \( cm ) \)a) \( \frac{3}{4} \)b) \( \frac{5}{8} \)c) \( \frac{9}{8} \)d) \( \frac{7}{8} \)47. The sum of perimeter of all triangle is (in \( cm \) )a) 144b) 625c) 400d) 16948. The area of all the triangle is (in sq cm)a) 576b) \( 144 \sqrt{3} \)c) \( 169 \sqrt{3} \)d) \( 192 \sqrt{3} \)49. The sum of perimeter of first 6 triangle is (in \( cm \) )a) 120b) \( \frac{567}{4} \)c) \( \frac{569}{4} \)d) 14450. The side of the 5th triangle is (in \( cm \) )a) 6b) \( 1.5 \)c) \( 0.75 \)d) 3

Description : Each side of an equilateral triand 12 is \( 24 cm \) the mid - point of its sides are joined to form another tranpla this brress is doins centinuously infinite46. The perimeter of 7 th triangle is \( ( \) in \( cm ) \)a) \( \ ... of the 5th triangle is (in \( cm \) )a) 6b) \( 1.5 \)c) \( 0.75 \)d) 3

Last Answer : Each side of an equilateral triand 12 is \( 24 cm \) the mid - point of its sides are joined to form another tranpla ... ( 1.5 \) c) \( 0.75 \) d) 3

A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years

Description : A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years

Last Answer : Answer: Option D

A train 200m in length, travels at 120 km/hr. In what time it will pass a boy who is walking at 12km an hour. a) against(opposite) it: b) in the same direction? A) 5.4,6.66 B) 7.2,5.2 C) 3.5,6 D) 12,16

Description : A train 200m in length, travels at 120 km/hr. In what time it will pass a boy who is walking at 12km an hour. a) against(opposite) it: b) in the same direction? A) 5.4,6.66 B) 7.2,5.2 C) 3.5,6 D) 12,16

Last Answer : ANSWER: A  Explanation: I) Speed of the train = 120 km/hr  Speed of the boy = 12 km/hr  Relative speed = (120 + 12) km/hr  Convert km/hr into m/s  132 km/hr = (132 * 5/ 18)m/s  = 36.66 m/s  Time = ... km/hr = (108 * 5 / 18)m/s  = 30 sec  Time = distance / speed  = 200 / 30  = 6.66 sec

Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Description : Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Last Answer : (A) Drag line

A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Description : A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Last Answer : Answer: D Explanation: in 1ms : refresh = 32 times Memory cycle = 1ms/250ns = 106ns/250ns = 4000 times Therefore, % of refresh time = (32 x 100ns)/(4000 x 250ns) = 3200ns/1000000 x 100% = 0.32%

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Last Answer : (C) Rs. 450

Match the columns (a) Activity Ratio -------------------- i) (Actual hours worked / Budgeted hours) * 100 (b) Capacity Ratio ------------------ ii) (Standard hours of actual production / Actual hours worked) * 100 (c) Efficiency Ratio ----------------- iii) (Standard hours for actual output / Budgeted hours) * 100 A. A-ii, B-iii, C-i B. A-i, B-ii, C-iii C. A-iii, B-i, C-ii D. None of the above

Description : Match the columns (a) Activity Ratio -------------------- i) (Actual hours worked / Budgeted hours) * 100 (b) Capacity Ratio ------------------ ii) (Standard hours of actual production / Actual hours worked) * 100 ( ... , B-iii, C-i B. A-i, B-ii, C-iii C. A-iii, B-i, C-ii D. None of the above

Last Answer : C. A-iii, B-i, C-ii

There is road besides a river. Two friends started from a place P, moved to a shopping mall situated at another place Q and then returned to P again. One of them moves on a cycle at a speed of 12 km/hr, while the other sails on a boat at a speed of 10 km/hr. If the river flows at the speed of 4 km/hr, which of the two friends will return to place P? A. Both B. Boater C. Cyclist D. None of these

Description : There is road besides a river. Two friends started from a place P, moved to a shopping mall situated at another place Q and then returned to P again. One of them moves on a cycle at a speed of 12 km/ ... which of the two friends will return to place P? A. Both B. Boater C. Cyclist D. None of these 

Last Answer : Answer-C Explanation: The cyclist moves both ways at a speed of 12khr so average speed fo the cyclist - 12 km/hr boat sailor moves downstream at 10+4 = 14km/hr and upstream 10- 4 = 6km/hr ... 8.4km/hr The average speed of cyclist is greater .so,cyclist comes first and return to place P.

The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Description : The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Last Answer : ANSWER : D

Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Description : Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Last Answer : (D) 16 litres/sec

For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Description : For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Last Answer : ANSWER d. 61.7%

For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle.

Description : For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle. 

Last Answer : (d) Regenerative cycle. 

Is it normal for a 12 year old not able to cum?

Description : Is it normal for a 12 year old not able to cum?

Last Answer : Yes it is they will be able to when they hit the age of 13 and their in puppetry too

How does it feel to cum as a 12 year old?

Description : How does it feel to cum as a 12 year old?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, what is the antenna current at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Description : A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, ... at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Last Answer : D. 2.0 A

Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%

Description : Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%

Last Answer : a. 30%-50%

Consider efficiencies of hydro-turbines and generators. If the efficiency of a hydro-turbine is 80% and the efficiency of a generator is 90%, what is the overall efficiency of the unit? w) 85% x) 72% y) 90% z) 70%

Description : Consider efficiencies of hydro-turbines and generators. If the efficiency of a hydro-turbine is 80% and the efficiency of a generator is 90%, what is the overall efficiency of the unit? w) 85% x) 72% y) 90% z) 70% 

Last Answer : ANSWER: X -- 72%

For an existing ac transmission line, the string efficiency is 80%, if dc...

Description : For an existing ac transmission line, the string efficiency is 80%, if dc voltage is supplied for the same setup, the string efficiency will be?

Last Answer : 100%

In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Description : In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Last Answer : B. 64 kbps

The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Description : The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Last Answer : (A) 0.01 cum

The expected out turn for earth work in excavation in ordinary soil per workman per day is (A) 1.00 cum (B) 2.00 cum (C) 3.00 cum (D) 4.00 cum

Description : The expected out turn for earth work in excavation in ordinary soil per workman per day is (A) 1.00 cum (B) 2.00 cum (C) 3.00 cum (D) 4.00 cum

Last Answer : (C) 3.00 cum

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

While preparing a detailed estimate (A) Dimension should be measured correct to 0.01 m (B) Area should be measured correct to 0.01 sqm (C) Volume should be measured correct to 0.01 cum (D) All the above

Description : While preparing a detailed estimate (A) Dimension should be measured correct to 0.01 m (B) Area should be measured correct to 0.01 sqm (C) Volume should be measured correct to 0.01 cum (D) All the above

Last Answer : (D) All the above

If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Last Answer : (A) 500 cum

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations per minute. c. You have to check compression point by thumbing before starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations ... starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : c. You have to check compression point by thumbing before starting compression.

While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 reseparations per minute C. You have to check compression point by thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 ... thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : C. You have to check compression point by thumping before starting compression