Superheated vapour behaves  (a) exactly as gas  (b) as steam  (c) as ordinary vapour  (d) approximately as a gas  (e) as average of gas and vapour.

Superheated vapour behaves
 (a) exactly as gas
 (b) as steam
 (c) as ordinary vapour
 (d) approximately as a gas
 (e) as average of gas and vapour.
by

1 Answer

Answer :

Answer : d
by

Related questions

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Description : For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Last Answer : Answer : d

Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Description : Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Last Answer : Answer : d

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

_____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Description : _____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Last Answer : Degrees of Superheat, °SH

_________________ is a combination of saturated vapor and saturated liquid.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is a combination of saturated vapor and saturated liquid.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Wet Vapor

__________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : __________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Superheated Vapor

___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure).  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : ___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure).  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Saturated Vapor

_________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Vapor

What refers to the pressure at which a pure substance changes phase at a given temperature?  A. Equilibrium pressure  B. Saturation pressure  C. Superheated pressure  D. Subcooled pressure

Description : What refers to the pressure at which a pure substance changes phase at a given temperature?  A. Equilibrium pressure  B. Saturation pressure  C. Superheated pressure  D. Subcooled pressure

Last Answer : Saturation pressure

What refers to the temperature at which a pure substance changes phase at a given pressure?  A. Equilibrium temperature  B. Saturation temperature  C. Superheated temperature  D. Subcooled temperature

Description : What refers to the temperature at which a pure substance changes phase at a given pressure?  A. Equilibrium temperature  B. Saturation temperature  C. Superheated temperature  D. Subcooled temperature

Last Answer : Saturation temperature

A vapor that is not about to condense is called _____ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A vapor that is not about to condense is called _____ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Superheated

A vapor that is about to condense is called ______ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A vapor that is about to condense is called ______ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Compressed or subcooled

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : e

From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Description : From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Last Answer : 1.79 kJ/ kg-˚C

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Water gas is obtained by passing air and a large amount of steam over waste coal at about 650°C.  A.Correct  B.Incorrect

Description : Water gas is obtained by passing air and a large amount of steam over waste coal at about 650°C.  A.Correct  B.Incorrect

Last Answer : Answer: B

The prefix “iso” used to designate a process means ______.  A. Cannot be interchanged  B. Remains constant  C. Approximately equal  D. Slight difference

Description : The prefix “iso” used to designate a process means ______.  A. Cannot be interchanged  B. Remains constant  C. Approximately equal  D. Slight difference

Last Answer : Remains constant

The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can’t work with saturated steam  (b) heat is supplied to water at temperature below the maximum temperature of the cycle  (c) a rankine cycle receives heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Description : The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can't work with saturated steam  (b) heat is supplied to water at temperature ... heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Last Answer : Answer : b

Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Description : Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Last Answer : Answer : c

During throttling process  (a) heat exchange does not take place  (b) no work is done by expanding steam  (c) there is no change of internal energy of steam  (d) all of the above  (e) entropy decreases.

Description : During throttling process  (a) heat exchange does not take place  (b) no work is done by expanding steam  (c) there is no change of internal energy of steam  (d) all of the above  (e) entropy decreases.

Last Answer : Answer : d

Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Description : Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Last Answer : Mollier diagram

What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

At steam point, the temperature of water and its vapor at standard pressure are:  a. Extremes or maximum  b. unity  c. in equilibrium  d. undefined

Description : At steam point, the temperature of water and its vapor at standard pressure are:  a. Extremes or maximum  b. unity  c. in equilibrium  d. undefined

Last Answer : in equilibrium

What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Last Answer : -1384.7 kJ

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Description : Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Last Answer : 1214Btu / lb

Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Description : Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Last Answer : 1.1577 BTU/lbm-˚R

A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C. 2.54 kg  D. 3.16 kg Formula: from the steam table at 600kPa vƒ = 0.001101 m^3 / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Last Answer : 3.16 kg

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Last Answer : 3300 lbf-ft/lbm

A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Description : A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Last Answer : 17.66 %

Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Description : Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Last Answer : dryness fraction

The term _________ is traditionally used to describe steam issuing from condensate receiver vents and openended condensate discharge lines from steam traps.  a. dry steam  b. wet steam  c. phase steam  d. flash steam

Description : The term _________ is traditionally used to describe steam issuing from condensate receiver vents and openended condensate discharge lines from steam traps.  a. dry steam  b. wet steam  c. phase steam  d. flash steam

Last Answer : flash steam

Mixture of liquid and steam of the same substance in which both are at saturation temperature.  a. dry steam  b. current steam  c. wet steam  d. aerosol

Description : Mixture of liquid and steam of the same substance in which both are at saturation temperature.  a. dry steam  b. current steam  c. wet steam  d. aerosol

Last Answer : wet steam

When liquid water is converted to steam at 100˚C, the entropy of water  a. increases  b. decreases  c. remains the same  d. none of the above

Description : When liquid water is converted to steam at 100˚C, the entropy of water  a. increases  b. decreases  c. remains the same  d. none of the above

Last Answer : increases

The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Description : The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Last Answer : isobaric

The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Description : The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Last Answer : Answer: D

The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Description : The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Last Answer : normal boiling point

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

Whether superheated steam can be treated like ideal gas ?

Description : Whether superheated steam can be treated like ideal gas ?

Last Answer : Yes.