A pole pitch in electrical machine is:

A pole pitch in electrical machine is:

(1) Equal to 180° electrical

(2) Equal to 180° mechanical

(3) Less than 180° electrical

(4) Greater Than 180° electrical
by

1 Answer

Answer :

A pole pitch in electrical machine is: Equal to 180° electrical

by

Related questions

A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

Total electrical degrees for a 4 pole AC machine is equal to

Description : Total electrical degrees for a 4 pole AC machine is equal to

Last Answer : Total electrical degrees for a 4 pole AC machine is equal to 720 ̊

A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with

Description : A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with 60o phase spread. Coil span is 7 short pitches. Number of slots in which top and bottom layers belong to different phases is  (A) 24 (B) 18 (C) 12 (D) 0

Last Answer : A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with 60o phase spread. Coil span is 7 short pitches. Number of slots in which top and bottom layers belong to different phases is 24 

The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)

Description : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

Last Answer : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole) has d -axis current only

The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors

Description : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V

Last Answer : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is 1000V

A rotating electrical machine its self-inductances of both the stator and the rotor windings, independent of

Description : A rotating electrical machine its self-inductances of both the stator and the rotor windings, independent of the rotor position will be definitely not develop  (A) starting torque (B) synchronizing torque (C) hysteresis torque (D) reluctance torque

Last Answer : A rotating electrical machine its self-inductances of both the stator and the rotor windings, independent of the rotor position will be definitely not develop synchronizing torque

Armature of an electrical machine is the

Description : Armature of an electrical machine is the (A) stator part of the machine (B) rotor part of the machine (C) yoke of the machine (D) none of these

Last Answer : Armature of an electrical machine is the rotor part of the machine

The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is

Description : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is (A) 2/3 (B) 5/6 (C) 7/8 (D) 6/7

Last Answer : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is 6/7

In D.C. machines fractional pitch winding is used?

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

Define Pole Pitch?

Description : Define Pole Pitch?

Last Answer : The distance between the centers of two adjacent poles is called pole pitch. One pole pitch is equals to 180 electrical degrees. It is also defined as the number of slots per pole.

Define pole pitch.

Description : Define pole pitch.

Last Answer : It is centre to centre distance between two adjacent poles. Two poles are responsible for 360 degree electrical of induced emf so one pole is responsible for 180 degree electrical of induced emf. Hence 180 degree electrical is called 1 pole pitch.

When the two coil sides forming a coil are spaced exactly one pole pitch apart they are said to be of (a) short pitch (b) full pitch (c) either of the above (d) none of the above

Description : When the two coil sides forming a coil are spaced exactly one pole pitch apart they are said to be of (a) short pitch (b) full pitch (c) either of the above (d) none of the above

Last Answer : (b) full pitch

What is the pitch factor of a 4 pole alternator having 36 slots and a coil span of 1 to 8?

Description : What is the pitch factor of a 4 pole alternator having 36 slots and a coil span of 1 to 8?  (A) 140° (B) 80° (C) 20° (D) 40°

Last Answer : C

In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be?

Last Answer : In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be 8.

The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A 

For the speed control purpose, pole changing method can be adopted for

Description : For the speed control purpose, pole changing method can be adopted for

Last Answer : For the speed control purpose, pole changing method can be adopted for Squirrel cage induction motor

Slip test is performed to determine : (A) Slip in an induction motor vtkgi Xd and Xq in a salient pole alternator

Description : Slip test is performed to determine :  (A) Slip in an induction motor  (B) Xd and Xq in a salient pole alternator  (C) Synchronous impedance in an alternator  (D) Positive and negative sequence impedances of an alternator

Last Answer : Slip test is performed to determine :  Xd and Xq in a salient pole alternator 

The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is

Description : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 

Last Answer : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 4 percent

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min

Description : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Last Answer : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and

Description : The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is (A) 0.25 pu (B) 0.5 pu (C) 1.0 pu (D) 1.5 pu

Last Answer : The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is 0.5 pu

The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu

Description : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are (A) 0.5 pu ... pu, 0.5 pu (C) 0.707 pu, 0.707 pu (D) 0.5 pu, 0.5 pu

Last Answer : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are 0.866 pu, 0.5 pu

A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor

Description : A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor rotates at a speed of ________ rpm with respect to stator field. (A) 1500 (B) 0 (C) 1440 (D) 60

Last Answer : 0

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW.

Description : An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is (A) 5.06 kW (B) 0.3 kW (C) 100 kW (D) 83.33 kW

Last Answer : An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is 83.33 kW

Locked rotor current of a shaded pole motor is?

Last Answer : Locked rotor current of a shaded pole motor is slightly more than full load current.

The shaded pole motor is used for?

Last Answer : The shaded pole motor is used for low starting torque.

In an alternator if the winding is short pitched by 60 electrical degrees, its pitch factor will be:

Description :  In an alternator if the winding is short pitched by 60 electrical degrees, its pitch factor will be: A) 1.0 B) 0.866 C) 0.75 D) 0.50

Last Answer :  In an alternator if the winding is short pitched by 60 electrical degrees, its pitch factor will be: A) 1.0 B) 0.866 C) 0.75 D) 0.50

What is the fastest speed a pitching machine will pitch a ball?

Description : What is the fastest speed a pitching machine will pitch a ball?

Last Answer : The fastest a pitching machine will throw a ball is 95mph. This limit is put in place due to safety issues. The fastest pitching machine ever is located in Japan. It throws at speeds of 125 MPH! In the US they are generally up to 95 MPH.

Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets connecting a lifeboat and the vessel's electrical system must have threaded plugs. C. Machinery spaces must contain sufficient outlets for lighting all machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Description : Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets ... machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Last Answer : Answer: A

The number of electrical degrees ‘passed through’ in one revolution of a 6-pole synchronous alternator is:

Description : The number of electrical degrees ‘passed through’ in one revolution of a 6-pole synchronous alternator is: A) 360 degree B) 720 degree C) 1080 degree D) 2160 degree

Last Answer : 1080

In electrical machines the material preferred for pole shoes of electromagnets is

Description : In electrical machines the material preferred for pole shoes of electromagnets is A. Pure iron B. Aluminium C. Copper D. Lead.

Last Answer : In electrical machines the material preferred for pole shoes of electromagnets is Pure iron.

UNIT 1 fundamentals of AC rotating machine

Description : UNIT 1 fundamentals of AC rotating machine Contents 1.1 Introduction 1.2 Advantages 1.3 Parts of AC machines 1.4 Synchronous speed 1.5 AC winding 1.6 Winding factor ( ... alternator or generator 1.9 Numericals 1.10 Harmonic 1.11 Slot harmonics 1.12 Harmonics minimization

Last Answer : 1.2 Advantages: In practices most of alternator have rotating magnetic field type construction with stationary armature due to following reason. The generation level of AC voltage may be in the range ... at high speed. Only two Slip rings are required to excited the field by AC supply.

Equalizer rings are used in a dc machine to

Description : Equalizer rings are used in a dc machine to (A) provide mechanical balance (B) balance the flux produced by the poles (C) provide path for the circulating currents (D) overcome armature reaction 

Last Answer : Equaliser rings in dc machine is     Current flowing in machines to share equally during parcel operation of dc machines    In case of Equaliser rings are not connected to machine the load ... between two machines flowing not equally     Equaliser rings are use series and compound motors only

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Last Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation,

Description : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as  (1) synchronous motor (2) synchronous generator (3) asynchronous motor (4) asynchronous generator

Last Answer : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as synchronous generator 

Aluminium is not used as winding wire for the armature of a dc machine because

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

In a dc machine, interpoles are used to

Description : In a dc machine, interpoles are used to  (1) neutralize the effect of armature reaction in the interpolar region (2) generate more induced emf in the armature (3) avoid interference of the armature flux with the main -field flux (4) reduce the demagnetizing effect of armature reaction

Last Answer : In a dc machine, interpoles are used to neutralize the effect of armature reaction in the interpolar region

Torque angle for the synchronous machine is the angle between

Description : Torque angle for the synchronous machine is the angle between (A) stator magnetic field and rotor magnetic field (B) stator magnetic field and net magnetic field in the air gap (C) rotor magnetic field and net magnetic field in the air gap (D) excitation voltage and impedance voltage drop

Last Answer : Torque angle for the synchronous machine is the angle between rotor magnetic field and net magnetic field in the air gap

Brushes of DC machine are made up of ?

Description : Brushes of DC machine are made up of ?

Last Answer : Brushes of DC machine are made up of carbon.

In a dc generator why does total flux per pole decrase if the load on the machine increases even thought the field current is constsn?

Description : In a dc generator why does total flux per pole decrase if the load on the machine increases even thought the field current is constsn?

Last Answer : Due to armature reaction

An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from _____________. A. one line terminal to each coil lead in succession B. one field coil to each adjacent field coil in turn C. any suitable ground to any available line lead D. any field pole to each field coil lead

Description : An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from ... C. any suitable ground to any available line lead D. any field pole to each field coil lead

Last Answer : Answer: A

A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Description : A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Last Answer : Answer: B

Which one of the following statements for a dc machine which is provided with inter pole winding (IW) as well as compensating winding (CW) is correct a) Both IW and CW are connected in series with Armature winding b) Both IW and CW are connected in parallel with Armature winding c) IW connected in series but CW is connected in parallel with Armature winding d) CW connected in series but IW is connected in parallel with Armature winding

Description : Which one of the following statements for a dc machine which is provided with inter pole winding (IW) as well as compensating winding (CW) is correct a) Both IW and CW are connected in ... parallel with Armature winding d) CW connected in series but IW is connected in parallel with Armature winding

Last Answer : Ans: Both IW and CW are connected in series with Armature winding

In a salient pole synchronous machine (usual symbols are used): (A) xq > xd (B) xq = xd (C) xq < xd (D) 0

Description : In a salient pole synchronous machine (usual symbols are used): (A) xq > xd (B) xq = xd (C) xq < xd (D) 0

Last Answer : Ans: C Since reluctance on the q axis is higher, owing to the larger air gap, hence xq < xd

In a four-pole D.C. machine (a) all the four poles are north poles (b) alternate poles are north and south (c) all the four poles are south poles (d) two north poles follow two south poles

Description : In a four-pole D.C. machine (a) all the four poles are north poles (b) alternate poles are north and south (c) all the four poles are south poles (d) two north poles follow two south poles

Last Answer : Ans: b

A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in

Description : A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in the figure. The Dc machine is energized first and the machines rotate at 1 600 ... three phase source, the phase sequence being consistent with the direction of rotation. In steady state

Last Answer : A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in the figure. The Dc machine is energized first and the machines rotate at 1 600 1pm. ... rotation. In steady state DC machine acts as a motor and the induction machine acts as a generator  

The number of parallel paths in armature winding of four pole wave winding connected dc machine having...

Description : The number of parallel paths in armature winding of four pole wave winding connected dc machine having 22 coil sides is (1) 4 (2) 22 (3) 2 (4) 11 

Last Answer : Ans- Option (3) because wave winding always have 2 parallel paths

The number of parallel paths in the armature winding of a 4 -pole, wave connected d.c. machine having 28 coilside is : -

Description :  The number of parallel paths in the armature winding of a 4 -pole, wave connected d.c. machine having 28 coilside is : -  a) 28 b) 14 c) 4 d) 2

Last Answer : 2

The function(s) of pole shoes in DC machine is/ are to : -

Description : The function(s) of pole shoes in DC machine is/ are to : -  a) Support the field coils b) Reduce the reluctance of the magnetic path c) Spread out the flux to achieve uniform flux distribution in the air gap d) All of the above.

Last Answer : Support the field coils

A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the ...

Description : A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the induction machine is connected to a 50Hz system. If the mechanical rotation of the rotor is in the same direction as the rotor winding flux rotation, then frequency of the stator voltage will be

Last Answer : A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the induction machine is connected to a 50Hz system. If the mechanical rotation of ... the same direction as the rotor winding flux rotation, then frequency of the stator voltage will be 140 Hz.

In a D.C. machine, how are the commutating pole winding connected?

Last Answer : In series with the shunt winding