Out of the followings, which one is correct in case of a circuit breaker?

Out of the followings, which one is correct in case of a circuit breaker?

(1) Making capacity = 2.55 X braking capacity

(2) Braking capacity = 2.55 X making capacity

(3) Making capacity = 1.8 X braking capacity

(4) Braking capacity = 1.8 X making capacity
by

1 Answer

Answer :

Out of the followings, which one is correct in case of a circuit breaker?

(1) Making capacity = 2.55 X braking capacity

(2) Braking capacity = 2.55 X making capacity

(3) Making capacity = 1.8 X braking capacity

(4) Braking capacity = 1.8 X making capacity

by

Related questions

The interrupting time of a circuit breaker is the period between the instant of

Description : The interrupting time of a circuit breaker is the period between the instant of  (A) initiation of short circuit and the arc extinction on an opening operation (B) energizing of the trip circuit ... of primary arc contacts (D) energizing of the trip circuit and the parting of primary arc contacts

Last Answer : The interrupting time of a circuit breaker is the period between the instant of energizing of the trip circuit and the arc extinction on an opening operation

Making current of a circuit breaker refers to:

Description : Making current of a circuit breaker refers to: (1) Steady state rated current (2) Average value of transient short circuit current (3) R.M.S. value of the short circuit current at the the time of major peak (4) Equal to the fault current

Last Answer : Making current of a circuit breaker refers to: R.M.S. value of the short circuit current at the the time of major peak

Keeping in view the cost and overall effectiveness, the following circuit breaker is best suited for capacitor

Description : Keeping in view the cost and overall effectiveness, the following circuit breaker is best suited for capacitor bank switching.  A) Vacuum B) Air blast C) SF6 D) Oil

Last Answer : Keeping in view the cost and overall effectiveness, the following circuit breaker is best suited for capacitor bank switching.  A) Vacuum B) Air blast C) SF6 D) Oil

The Use of high speed circuit breakers

Description : The Use of high speed circuit breakers  A) Reduces the short circuit current B) Improves system stability C) Decreases system stability D) Increases the short circuit current

Last Answer : Q

Resistance switching is employed in

Description : Resistance switching is employed in  A) All breakers B)Bulk oil breakers C) Minimum oil breakers D) Air blast circuit breakers

Last Answer : Resistance switching is employed in  A) All breakers B)Bulk oil breakers C) Minimum oil breakers D) Air blast circuit breakers

How will a molded-case circuit breaker react after it has tripped, as a result of an overloaded circuit? A. The breaker will trip again if immediately reset. B. The breaker handle will lock in the OFF position. C. The breaker handle will lock in the tripped position until the thermal element cools down. D. The breaker handle cannot be moved to the OFF position until the thermal element cools down.

Description : How will a molded-case circuit breaker react after it has tripped, as a result of an overloaded circuit? A. The breaker will trip again if immediately reset. B. The breaker handle will lock in ... down. D. The breaker handle cannot be moved to the OFF position until the thermal element cools down.

Last Answer : Answer: A

When the operating handle of a molded case circuit breaker is in the mid-position, it indicates the circuit breaker is _____________. A. in the 'opened' position B. in the 'closed' position C. tripped D. reset

Description : When the operating handle of a molded case circuit breaker is in the mid-position, it indicates the circuit breaker is _____________. A. in the 'opened' position B. in the 'closed' position C. tripped D. reset

Last Answer : Answer: C

When the operating handle of a molded-case circuit breaker is in the mid-position, the circuit breaker is indicated as being ____________. A. in the 'closed' position B. in the 'opened' position C. tripped D. reset

Description : When the operating handle of a molded-case circuit breaker is in the mid-position, the circuit breaker is indicated as being ____________. A. in the 'closed' position B. in the 'opened' position C. tripped D. reset

Last Answer : Answer: C

When the operating handle of a molded-case circuit breaker is in the mid-position, this indicates that the circuit breaker is _____________. A. on B. off C. reset D. tripped

Description : When the operating handle of a molded-case circuit breaker is in the mid-position, this indicates that the circuit breaker is _____________. A. on B. off C. reset D. tripped

Last Answer : Answer: D

A molded-case circuit breaker provides protection against short circuits by using a/an ________________. A. electromagnet B. shading coil C. arc quencher D. burn away strip

Description : A molded-case circuit breaker provides protection against short circuits by using a/an ________________. A. electromagnet B. shading coil C. arc quencher D. burn away strip

Last Answer : Answer: A

All of the followings are related to Epidemiology except D A. Case-control studies B. Cohort Studies C. Longitudinal and cross sectional studies D. None

Description : All of the followings are related to Epidemiology except D A. Case-control studies B. Cohort Studies C. Longitudinal and cross sectional studies D. None

Last Answer : None

During maintenance of circuit breakers, _______________. A. always smooth roughened contact surfaces with a file B. never pass more than rated breaker current through the overload heater element C. inspect for wear and misalignment of main contacts D. assume heater elements installed are of correct size

Description : During maintenance of circuit breakers, _______________. A. always smooth roughened contact surfaces with a file B. never pass more than rated breaker current through the overload heater element C. ... wear and misalignment of main contacts D. assume heater elements installed are of correct size

Last Answer : Answer: C

Which one is not a correct type of circuit breaker:

Description : Which one is not a correct type of circuit breaker: A. Over Head circuit breaker B. Miniature Circuit Breaker C. Earth Leakage Circuit Breaker D. Oil Circuit Breaker 

Last Answer : Which one is not a correct type of circuit breaker: Over Head circuit breaker

Define the followings. Insulation level, Rated short circuit breaking current, Making current, Short time rating, Impulse withstand voltage, Power frequency withstand voltage .

Description : Define the followings.   Insulation level, Rated short circuit breaking current, Making current, Short time rating, Impulse withstand voltage, Power frequency withstand voltage .

Last Answer : Insulation level - it is the combination of rated voltage, the corresponding impulse withstand voltage, which together characterize the insulation of the equipment as regards its ability to withstand ... wave of power frequency (50 Hz) which the insulation of equipment should withstand. 

Which one of the followings is/are correct definition of Habitat? (1) A complex of several types of communities (2) Natural environment of a living organism (3) The place where one would go find the particular living organism. (4) Natural environment of a living organism and the place where one would go find the particular living organism.

Description : Which one of the followings is/are correct definition of Habitat? (1) A complex of several types of communities (2) Natural environment of a living organism (3) The place where one would ... environment of a living organism and the place where one would go find the particular living organism.

Last Answer : (4) Natural environment of a living organism and the place where one would go find the particular living organism. Explanation: Habitat is generally defined as the natural environment ... an area of uniform environmental conditions associated with a particular community of plants and animals

Which of the followings is correct in relation with Marxist ideas of state

Description : Which of the followings is correct in relation with Marxist ideas of state

Last Answer : State is a class institution

Which one of the followings is correct statement D A. Almost all trematodes are hermaphrodite B. All are hermaphrodite except Schistosomatidae C. Members of Genus Fasciola are hermaphrodite D. All of above

Description : Which one of the followings is correct statement D A. Almost all trematodes are hermaphrodite B. All are hermaphrodite except Schistosomatidae C. Members of Genus Fasciola are hermaphrodite D. All of above

Last Answer : All of above

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Which one of the followings is/ are correct definition of Habitat? (1) A complex of several types of communities (2) Natural environment of a living organism (3) The place where one would go find the particular living organism. (4) Natural environment of a living organism and the place where one would go find the particular living organism.

Description : Which one of the followings is/ are correct definition of Habitat? (1) A complex of several types of communities (2) Natural environment of a living organism (3) The place where one would ... environment of a living organism and the place where one would go find the particular living organism.

Last Answer : Natural environment of a living organism and the place where one would go find the particular living organism.

Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. Secure and tag the supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Description : Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. ... supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Last Answer : Answer: C

Which of the following problems will occur if the circuit breaker of the incoming alternator is closed and it is 180° out of phase with the loaded alternator when paralleling? A. The rotor of the loaded alternator will hunt. B. Severe cross currents will occur which could cause damage. C. The rotor of the incoming alternator will stop. D. Both alternators will parallel 180° out of phase.

Description : Which of the following problems will occur if the circuit breaker of the incoming alternator is closed and it is 180° out of phase with the loaded alternator when paralleling? A. The rotor of the ... The rotor of the incoming alternator will stop. D. Both alternators will parallel 180° out of phase.

Last Answer : Answer: B

Which of the following actions must be carried out prior to closing the alternator circuit breaker according to the graph shown in the illustration? EL-0002 A. Increase the alternator voltage. B. Decrease the line voltage. C. Increase the line voltage. D. Decrease the line frequency.

Description : Which of the following actions must be carried out prior to closing the alternator circuit breaker according to the graph shown in the illustration? EL-0002 A. Increase the alternator voltage. B. Decrease the line voltage. C. Increase the line voltage. D. Decrease the line frequency.

Last Answer : Answer: A

In order to safely carry out repairs to a generator circuit breaker, it must be isolated from the bus. This is accomplished by opening the _____________. A. reverse power relay B. bus disconnect link C. generator bus fuse connections D. power directional relay

Description : In order to safely carry out repairs to a generator circuit breaker, it must be isolated from the bus. This is accomplished by opening the _____________. A. reverse power relay B. bus disconnect link C. generator bus fuse connections D. power directional relay

Last Answer : Answer: B

You can determine if a circuit breaker is tripped by ______. A. examining the position of the handle B. checking for the warm breaker C. looking for a burned-out link D. looking for the tripped breaker light

Description : You can determine if a circuit breaker is tripped by ______. A. examining the position of the handle B. checking for the warm breaker C. looking for a burned-out link D. looking for the tripped breaker light

Last Answer : Answer: A

Undervoltage trips are frequently installed on switchboard circuit breakers to trip ____________. A. out generators in the event of severe arcing or sparking B. out generators when there is reversal of power in the main circuit C. the breaker if the generator overspeeds by 5%, but continues to run D. out generators when there is low voltage in the main circuit

Description : Undervoltage trips are frequently installed on switchboard circuit breakers to trip ____________. A. out generators in the event of severe arcing or sparking B. out generators when there is reversal of power ... , but continues to run D. out generators when there is low voltage in the main circuit

Last Answer : Answer: D

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency and the circuit breaker may be closed at any pointer position D. the same as the bus frequency but out of phase with it

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... at any pointer position D. the same as the bus frequency but out of phase with it

Last Answer : Answer: A

You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0°. If you close the circuit breaker at this moment _____________. A. the incoming machine will accept all of the load B. the incoming machine will trip out on low voltage release C. a hazardous condition will be created by the cross current between the machines D. a hazardous condition will be created by the incoming machine being at a higher frequency than the bus

Description : You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0°. If you close the circuit breaker at this moment _____________. A. the incoming ... hazardous condition will be created by the incoming machine being at a higher frequency than the bus

Last Answer : Answer: C

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... the same as the bus frequency and the circuit breaker may be closed at any pointer position

Last Answer : Answer: A

In addition to testing the calibration of a circuit breaker, maintenance should include all of the following EXCEPT ______________. A. changing out of magnetic elements and thermal heaters yearly B. checking for corrosion, accumulation of dirt and thermal fatigue C. inspecting for loose or missing parts D. making sure foreign matter does not block tripping element

Description : In addition to testing the calibration of a circuit breaker, maintenance should include all of the following EXCEPT ______________. A. changing out of magnetic elements and thermal heaters yearly B. ... for loose or missing parts D. making sure foreign matter does not block tripping element

Last Answer : Answer: A

You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency, and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than ... same as the bus frequency, and the circuit breaker may be closed at any pointer position

Last Answer : Answer: B

You can determine if a circuit breaker has tripped by ________________. A. examining the position of the handle B. checking for which of the breakers is warm C. looking for a burned-out link D. all of the above

Description : You can determine if a circuit breaker has tripped by ________________. A. examining the position of the handle B. checking for which of the breakers is warm C. looking for a burned-out link D. all of the above

Last Answer : Answer: A

A circuit breaker and a fuse have a basic similarity in that they both _____________. A. can be reset to energize the circuit B. should open the circuit when overloaded C. will burn out when an over current flow develops D. all of the above

Description : A circuit breaker and a fuse have a basic similarity in that they both _____________. A. can be reset to energize the circuit B. should open the circuit when overloaded C. will burn out when an over current flow develops D. all of the above

Last Answer : Answer: B

Action carried out by the relay and circuit breaker during fault condition?

Description : Action carried out by the relay and circuit breaker during fault condition?

Last Answer : Answer: After the relay sensing the fault condition, relay operates and close the trip coils. The effect of this will be circuit breaker operate to open the contacts.

Mention the various tests carried out in a circuit breaker at HV labs.

Description : Mention the various tests carried out in a circuit breaker at HV labs.

Last Answer : Short circuit tests, Synthetic tests& direct tests.

After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Description : After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Last Answer : There is a power link connection breaker between the main generator and the emergency generator. During black out, this breaker trips. The emergency generator starts and its breaker closes and feeds only ... , there is no paralleling between main and emergency generator. Ask E/O for more details.

A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Description : A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Last Answer : Answer: C

Electrical jellies! Got a circuit breaker (home) that has popped and won't reset. Suggestions?

Description : Electrical jellies! Got a circuit breaker (home) that has popped and won't reset. Suggestions?

Last Answer : My husband, who was a master electrician, said you need to call a professional. You either have a bad breaker or the breaker that refuses to reset is saving your life because you have a dead short some place and your house would burn down if ithe breaker wasn’t tripped.

My (soon-to-be-replaced) air conditioner is frequently tripping the circuit breaker in my apartment. What can I do to prevent this?

Description : My (soon-to-be-replaced) air conditioner is frequently tripping the circuit breaker in my apartment. What can I do to prevent this?

Last Answer : answer:A mini-split AC unit will use less power than a regular square version and should help with the problem. However if your problem resides in old wiring with a lower amperage/threshold you might ... every time you want to use it but this has cut my electric bill dramatically. Hope this helps

What is the difference between a fuse and a circuit breaker ?

Description : What is the difference between a fuse and a circuit breaker ?

Last Answer : Fuse : It is a type of soft metal wire which, when more than the required current flows through the wire, burns it, disconnects the electrical circuit from the source and protects the valuable ... or fault in the power supply line . This breaks the static contact and protects it from accidents.

Why is the circuit breaker turned off automatically ?

Description : Why is the circuit breaker turned off automatically ?

Last Answer : Circuit breakers are automatically turned off to protect electrical equipment from damage. An automatic switch is used to protect the electrical circuit or electrical equipment from damage due to ... is stopped and the electrical equipment connected to the circuit is protected from damage.

What is Earth Leakage Circuit Breaker ?

Description : What is Earth Leakage Circuit Breaker ?

Last Answer : Earth leakage circuit breaker is a protective device which protects the leaky faulty or faulty circuit from dangerous parts by separating it from the good parts. The leakage current of the circuit flows ... a faulty place due to a leakage error in the circuit is called a leakage circuit breaker.

What is an Air Circuit Breaker ?

Description : What is an Air Circuit Breaker ?

Last Answer : Air circuit breaker is a circuit breaker which is controlled by air, that is, a breaker which is turned on by air pressure and turned off by air pressure .

What is Oil Circuit Breaker ?

Description : What is Oil Circuit Breaker ?

Last Answer : An oil circuit breaker is a circuit breaker that contains oil and is in operation or on-off insulation oil . The oil used in the oil circuit breaker acts as insulation and extinguishes the arc. ... types. A) Plain brake type bulk oil circuit breaker and b) Arc controlled bulk oil circuit breaker.

What is a circuit breaker ?

Description : What is a circuit breaker ?

Last Answer : When excessive current flows in any faulty circuit , it is called circuit breaker which disconnects automatically or automatically.

What is the reason for using circuit breaker in circuit ?

Description : What is the reason for using circuit breaker in circuit ?

Last Answer : Circuit breakers are used for safety.

What is the function of circuit breaker ?

Description : What is the function of circuit breaker ?

Last Answer : Used to stop excessive flow

What are the common sizes of circuit breaker panel for all electrical home?

Description : What are the common sizes of circuit breaker panel for all electrical home?

Last Answer : 200 amp is the most common size used in most homes.

Why will too many electrical devices operating at one time after blow a fuse or trip a circuit breaker?

Description : Why will too many electrical devices operating at one time after blow a fuse or trip a circuit breaker?

Last Answer : The load exceeds the limit of the breaker or fuse. For example a20 amp breaker on a 120 volt circuit will handle 2400 watts. Exceedthat wattage and the breaker will trip or the fuse will blow.