The meaning of standard are a) Target limits on energy performance b) Well defined test protocols to obtain a sufficiently accurate estimate c) Both are correct d) Both are wrong

The meaning of standard are
a) Target limits on energy performance
b) Well defined test protocols to obtain a sufficiently accurate estimate
c) Both are correct
d) Both are wrong
by

1 Answer

Answer :

Both are correct
by

Related questions

__________ are the function of a label. a) Well defined test protocols b) Target limits on energy performance b) Disseminate information on the benefits to consumers d) Describes energy performance

Description : __________ are the function of a label. a) Well defined test protocols b) Target limits on energy performance b) Disseminate information on the benefits to consumers d) Describes energy performance

Last Answer : Describes energy performance

Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Description : Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Last Answer : Provide a certification to inform prospective purchasers

The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Last Answer : Allow consumers to compare the energy consumption of similar products

The time lag between the performance of marketing activities and their results A)limits the marketing manager's ability to measure the effectiveness of marketing activities. B)facilitates the ability to measure performance. C)increases the chance of accurate measurement. D)limits the amount of money to be spent on measurement.

Description : The time lag between the performance of marketing activities and their results A)limits the marketing manager's ability to measure the effectiveness of marketing activities. B)facilitates the ability to ... chance of accurate measurement. D)limits the amount of money to be spent on measurement.

Last Answer : A)limits the marketing manager's ability to measure the effectiveness of marketing activities.

___ energy consumption to an appropriate standard or benchmark. a] Setting target c] Comparing. b] Reporting d] Allocating

Description : ____ energy consumption to an appropriate standard or benchmark. a] Setting target c] Comparing. b] Reporting d] Allocating

Last Answer : comparing

Point out the wrong statement. a) Virtual appliances are becoming a very important standard cloud computing deployment object b) Cloud computing requires some standard protocols c) Cloud computing relies on a set of protocols needed to manage interprocess communications d) None of the mentioned

Description : Point out the wrong statement. a) Virtual appliances are becoming a very important standard cloud computing deployment object b) Cloud computing requires some standard protocols c) Cloud computing relies on a set of protocols needed to manage interprocess communications d) None of the mentioned

Last Answer : None of the mentioned

86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Description : 86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Last Answer : 2

Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Description : Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Last Answer : Answer: B

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the translation and management layer in an architecture that removes the barrier for a client obtaining desired services c) With SOA, clients and components can be written in different languages and can use multiple messaging protocols d) All of the mentioned

Description : Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the ... written in different languages and can use multiple messaging protocols d) All of the mentioned

Last Answer : All of the mentioned

Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the translation and management layer in an architecture that removes the barrier for a client obtaining desired services c) With SOA, clients and components can be written in different languages and can use multiple messaging protocols d) All of the mentioned

Description : Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the ... written in different languages and can use multiple messaging protocols d) All of the mentioned

Last Answer : All of the mentioned

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

How do I get an accurate estimate on the value of my car?

Description : How do I get an accurate estimate on the value of my car?

Last Answer : You can find a car value estimator tool online at estimatemycar dot com. That site has the tool for free to use. Try that site to get the information you need.

Which type of project cost estimate is the most accurate? 1. Preliminary 2. Definitive 3. Order of magnitude 4. Conceptual

Description : Which type of project cost estimate is the most accurate? 1. Preliminary  2. Definitive  3. Order of magnitude  4. Conceptual

Last Answer : 2. Definitive

Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The pointer will move to infinity when the meter is not in use. C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Description : Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The ... C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Last Answer : Answer: D

_________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Last Answer : standard atmospheric pressure

What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Last Answer : Carnot efficiency

What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to the 'signal conditioner'. C. Initiate logging of measured information at set intervals; for example, each hour. D. Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Description : What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to ... . Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Last Answer : Answer: D

Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have to measure the cell potential to obtain the difference in potential energy because the potential of half-reactions cannot be measured directly. C The direction of a redox reaction can only be determined experimentally. D Half-cell potentials for half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Description : Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have ... half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Last Answer : C The direction of a redox reaction can only be determined experimentally. 

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

If two persons with ‘AB’ blood group marry and have sufficiently large number of children, these children could be classified as ‘A’ blood group: ‘AB’ blood group : ‘B’ blood group in 1 : 2 : 1 ratio. Modern technique of protein electrophoresis reveals presence of both ‘A’ and ‘B’ type proteins in ‘AB’ blood group individuals. This in an example of (a) partial dominance (b) complete dominance (c) codominance (d) incomplete dominance.

Description : If two persons with AB' blood group marry and have sufficiently large number of children, these children could be classified as A' blood group: AB' blood group : B' blood group in 1 ... in an example of (a) partial dominance (b) complete dominance (c) codominance (d) incomplete dominance.

Last Answer : (c) codominance

The design of a beam is based on strength criteria, if the beam is sufficiently strong to resist ----------------. a.Shear force b.deflection c. both a and b. d. none of the above.

Description : The design of a beam is based on strength criteria, if the beam is sufficiently strong to resist ----------------. a.Shear force b.deflection c. both a and b. d. none of the above.

Last Answer : a.Shear force

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

Protocols are set of rules to govern _________ a) Communication b) Standard c) Metropolitan communication d) Bandwidth

Description : Protocols are set of rules to govern _________ a) Communication b) Standard c) Metropolitan communication d) Bandwidth

Last Answer : a) Communication

Which of the following comes under supplementary ISDN services? a) Emergency calling b) Packet switched protocols c) Call diversion d) Standard mobile telephony

Description : Which of the following comes under supplementary ISDN services? a) Emergency calling b) Packet switched protocols c) Call diversion d) Standard mobile telephony

Last Answer : c) Call diversion

______ consists of communication protocols for electronic devices, typically a mobile device and a standard device. A. RFID B. MQTT C. NFC D. None of above

Description : ______ consists of communication protocols for electronic devices, typically a mobile device and a standard device. A. RFID B. MQTT C. NFC D. None of above

Last Answer : C. NFC 

Which among the following standard protocols is the most widely used by the Internet ? (1) HTTP (2) TCP/IP (3) SMTP (4) SLIP

Description : Which among the following standard protocols is the most widely used by the Internet ? (1) HTTP (2) TCP/IP (3) SMTP (4) SLIP

Last Answer : TCP/IP

Explain about standard and non standard protocols at the application layer.

Description : Explain about standard and non standard protocols at the application layer.

Last Answer : HTTP The Hypertext Transfer Protocol (HTTP) is a Application layer protocol used mainly to access data on the World Wide Web. HTTP uses the services of TCP on well-known port 80. FTP ... starts with the client when the user needs to download e-mail from the mailbox on the mail server.

19. An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Last Answer : Future production projection

An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Last Answer :  Future Production Projection

Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring

Description : Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring

Last Answer : monitoring

What is the marketing objective of non-business organizations ? 1. To provide an idea or service to the public 2. To obtain a desired response from a target market or public 3. To obtain a return on social investment 4. To determine the target market and to create and maintain a satisfying marketing mix 5. none of these

Description : What is the marketing objective of non-business organizations ? 1. To provide an idea or service to the public 2. To obtain a desired response from a target market or public 3. To obtain ... To determine the target market and to create and maintain a satisfying marketing mix 5. none of these

Last Answer : To obtain a desired response from a target market or public

What is the marketing objective of nonbusiness organisations? A)To provide an idea or service to the public B)To obtain a desired response from a target market or public C)To obtain a return on social investment D)To determine the target market and to create and maintain a satisfying marketing mix

Description : What is the marketing objective of nonbusiness organisations? A)To provide an idea or service to the public B)To obtain a desired response from a target market or public C)To obtain a return on social investment D)To determine the target market and to create and maintain a satisfying marketing mix

Last Answer : B)To obtain a desired response from a target market or public

Why would a hacker use a proxy server? a. To create a stronger connection with the target. b. To create a ghost server on the network. c. To obtain a remote access connection. d. To hide malicious activity on the network.

Description : Why would a hacker use a proxy server? a. To create a stronger connection with the target. b. To create a ghost server on the network. c. To obtain a remote access connection. d. To hide malicious activity on the network.

Last Answer : d. To hide malicious activity on the network.

Which one of the following applications software’s is used to obtain an accurate root locus for? a) LISP b) MATLAB c) dBase d) Oracle Ans: B 6.Lenz devised a rule to find out direction of a)current induced in a circuit b)electromagneticdifference c)potential difference d)flow of power in fuse

Description : Which one of the following applications software’s is used to obtain an accurate root locus for? a) LISP b) MATLAB c) dBase d) Oracle Ans: B 6.Lenz devised a rule to find out direction of a)current induced in a circuit b)electromagneticdifference c)potential difference d)flow of power in fuse

Last Answer : Ans: A

When taking resistance readings with a VOM, you will obtain the most accurate readings at or near what part of the scale?

Description : When taking resistance readings with a VOM, you will obtain the most accurate readings at or near what part of the scale?

Last Answer : Midscale.

A(n) _ is a review of the quality plan, procedures, data collection, and analysis by an outside group. Select one: a. scope document b. project appraisal c. cost performance index d. analogous estimate e. quality audit

Description : A(n) _ is a review of the quality plan, procedures, data collection, and analysis by  an outside group. Select one: a. scope document b. project appraisal c. cost performance index d. analogous estimate e. quality audit

Last Answer : e. quality audit

The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Description : The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Last Answer : (d) completely reversed load

Point out the wrong statement. a) Atom is a syndication format that allows for HTTP protocols to create and update information b) Cloud services span the gamut of computer applications c) The impact of cloud computing on network communication is to discourage the use of open-network protocols in place of proprietary protocols d) None of the mentioned

Description : Point out the wrong statement. a) Atom is a syndication format that allows for HTTP protocols to create and update information b) Cloud services span the gamut of computer applications c) ... discourage the use of open-network protocols in place of proprietary protocols d) None of the mentioned

Last Answer : The impact of cloud computing on network communication is to discourage the use of open-network protocols in place of proprietary protocols

The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Description : The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Last Answer : Answer: D

A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  (a) justified  (b) not possible  (c) may be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Description : A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  ( ... be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Last Answer : Answer : b

Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Description : Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Last Answer : Answer : d

Do you believe that people should just stop answering a Q when you are satisfied that it has been answered sufficiently?

Description : Do you believe that people should just stop answering a Q when you are satisfied that it has been answered sufficiently?

Last Answer : I totally agree with you, but some people here think they are above the rest and we should do what they want. I do notice if they don’t like the question or the discussion they go into attack mode,and do anything to derail it, if you don’t like it ignore it, and simply don’t participate in it.