Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP
by

1 Answer

Answer :

EER = 3.42 COP
by

Related questions

The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Description : The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Last Answer : Absorbed heat and work required

What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Last Answer : Energy efficiency rating

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Last Answer : 42.41 ft^3

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Last Answer : Energy Efficiency Ratio

The thermal efficiency of a reversible heat engine operating between two given thermal reservoirs is 0.4. The device is used either as a refrigerator or as a heat pump between the same reservoirs. Then the coefficient of performance as a refrigerator (COP)R and the co-efficient of performance as a heat pump (COP)HP are (A) (COP)R = (COP)HP = 0.6 (B) (COP)R = 2.5; (COP)HP = 1.5 (C) (COP)R = 1.5; (COP)HP = 2.5 (D) (COP)R = (COP)HP = 2.5

Description : The thermal efficiency of a reversible heat engine operating between two given thermal reservoirs is 0.4. The device is used either as a refrigerator or as a heat pump between the same reservoirs. Then the coefficient of performance as a ... )R = 1.5; (COP)HP = 2.5 (D) (COP)R = (COP)HP = 2.5

Last Answer : (C) (COP)R = 1.5; (COP)HP = 2.5

What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Description : What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Last Answer : Combustion efficiency

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Description : The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Last Answer : Answer: D

The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Description : The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Last Answer : Answer: A

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Description : When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Last Answer : Answer: A

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Description : The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Last Answer : Answer : b

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Full form of COP is A. Coefficient of Pressure B. Coefficient of performance C. Coefficient of program D. None of the above

Description : Full form of COP is A. Coefficient of Pressure B. Coefficient of performance C. Coefficient of program D. None of the above

Last Answer : Coefficient of performance

The ratio of two specific heats of air is equal to  (a) 0.17  (b) 0.24  (c) 0.1  (d) 1.41  (e) 2.71.

Description : The ratio of two specific heats of air is equal to  (a) 0.17  (b) 0.24  (c) 0.1  (d) 1.41  (e) 2.71.

Last Answer : Answer : d

Assuming compression is according to the Law PV = C, Calculate the initial volume of the gas at a pressure of 2 bars w/c will occupy a volume of 6m³ when it is compressed to a pressure of 42 Bars.  a) 130m³  b) 136m³  c) 120m³  d) 126m³ Formula: P1V1/T1 =P2V2/T2

Description : Assuming compression is according to the Law PV = C, Calculate the initial volume of the gas at a pressure of 2 bars w/c will occupy a volume of 6m³ when it is compressed to a pressure of 42 Bars.  a) 130m³  b) 136m³  c) 120m³  d) 126m³ Formula: P1V1/T1 =P2V2/T2

Last Answer : 126m³

When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Description : When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Last Answer : Answer: B

What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Last Answer : Carnot efficiency

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion.  a. unrelated to  b. proportional to  c. twice  d. three times

Description : For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion.  a. unrelated to  b. proportional to  c. twice  d. three times

Last Answer : three times

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

“The entropy change of a system during a process is equal to the net entropy transfer through the system boundary and the entropy generated within the system”. This statement is known as:  A. Entropy generation  B. Entropy change of a system  C. Entropy balance relation  D. Third law of thermodynamics

Description : The entropy change of a system during a process is equal to the net entropy transfer through the system boundary and the entropy generated within the system . This statement is known as:  A. Entropy ...  B. Entropy change of a system  C. Entropy balance relation  D. Third law of thermodynamics

Last Answer : Entropy balance relation

An ideal gas at 45psig and 80ºF is heated in the close container to 130ºF. What is the final pressure?  a. 65.10 psi  b. 65.11 psi  c. 65.23 psi  d. 61.16 psi P1V1/T1= P2V2/T2;V = Constant

Description : An ideal gas at 45psig and 80ºF is heated in the close container to 130ºF. What is the final pressure?  a. 65.10 psi  b. 65.11 psi  c. 65.23 psi  d. 61.16 psi P1V1/T1= P2V2/T2;V = Constant

Last Answer : 65.23 psi

Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Description : Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Last Answer : 2474.23 N

A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Description : A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2  A. 4474.23 N  B.5484.23 N  C.4495.23 N  D.5488.23 N Formula: F = m/k (a +g)

Last Answer : 4474.23 N

On volume basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 77  (e) 79.

Description : On volume basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 77  (e) 79.

Last Answer : Answer : a

On weight basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 73  (e) 79.

Description : On weight basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 73  (e) 79.

Last Answer : Answer : b

A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the reference year. What is your inference? Given that:  The current year (2016-17 ) Annual Production – 28,750 T ,  Current year (2016-17 ) Annual Energy Consumption– 23,834 MWh,  Reference year (2015-16 ) production - 34,000 T,  Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Description : The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Last Answer : EER in BTU/hr/W = 3.413 EER in W/W.

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Description : A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Last Answer : 17.66 %

For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Description : For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Last Answer : Eff = 1 – (T2/T1)

Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Description : Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Last Answer : Answer: B

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

The efficiency of Diesel cycle increases with  A. decrease in cut-off  B. increase in cut-off  C. constant cut-off  D. none of these

Description : The efficiency of Diesel cycle increases with  A. decrease in cut-off  B. increase in cut-off  C. constant cut-off  D. none of these

Last Answer : Answer: A

The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Description : The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Last Answer : Answer: C

The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Description : The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Last Answer : Answer: C

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Description : The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : a

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Description : The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Last Answer : Answer : e

An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Description : An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Last Answer : Answer : d

Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Description : Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Last Answer : Answer : b

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a