Description : Which are the following stages of registration? a) Company registration b) Product registration c) Model registration d) Symbol registration A. a) and b) C. b) and c) B. a) and c) D. a) and d)
Last Answer : a) and c)
Description : Model registration fee payment can be done by... a. Demand draft c. Cash b. Online d. Both a & b
Last Answer : Both a & b
Description : How many stages of application for registration? A. only one C. two B. five D. four
Last Answer : two
Description : The Model Registration fee for each model is _________ & payment can be made through ____. A. 1500rs & only bank DD. B. 1000rs & bank DD or through online. C. 10,000rs & only through online. D. None of the above.
Last Answer : 10,000rs & only through online.
Description : Model registration fee for each model is a. 1000 c. 3000 a. 1000 c. 3000
Last Answer : 1000
Description : The applications of S&L scheme are _____. a) Procedure for obtaining a label b) Financial obligations involved c) Frost free refrigerator d) Model registration
Last Answer : Model registration
Description : The registration for BEE is done in _______ stage A. Three stage. C. Four stage B. Two stage. D. Single stage
Last Answer : Two stage
Description : Registration of cutter bar is a) Aligning centers of guard and knife b) Keeping cutter bur in 88 degrees c) Both d) None of these Ans. a
Last Answer : ans a
Description : One time company registration fee can be paid through a) demand draft c) both a) and b) b) online d) None of above
Last Answer : both a) and b)
Description : If small scale industry applying for registration first time required ……………..certificate A. BIS B. SSI C. Both A and B D. None of above
Last Answer : SSI
Description : ………………… documents are not accepted as per general guideline of company registration. A. without proper filling and loosing C. folded or improper B. Both A and B D. None of above
Last Answer : without proper filling and loosing
Description : Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard
Description : A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above
Last Answer : <!-- [if !supportLists] -->a. <!-- [endif] -->Ans- b. centre
Description : is the one time Company Registration fee for large scale industries ? a) 50000/- b) 100000/- c) 150000/- d) None of the above
Last Answer : 100000
Description : For small scale industries the company registration fee is a) Rs.100000 c) Rs.25000 b)Rs.250000 d) Rs.150000
Last Answer : 25000
Description : For large scale industries the One time registration fee is a) Rs.25000 c) Rs.250000 b) Rs.100000 d) Rs.700000
Last Answer : Rs.100000
Description : Company registration fee for small scale industry is Rs ……………… A. 10000 C. 15000 B. 25000 D. 20000
Description : One time company registration fee for large scale industry is Rs…………….. A. 150000 C. 100000 B. 50000 D. 75000
Description : One time registration fee of rupees 1,00,000 for large-scale and Rs _________ for small scale industry. A. 30,000 C. 15,000 B. 25,000 D. 28,000
Description : “The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as: A. Dulong’s Law B. Dalton’s Law C. Hess’s Law D. Petit Law
Last Answer : Hess’s Law
Description : Which model is used during early stages of the system design afterthe requirements have been established? a) An application-composition model b) A post-architecture model c) A reuse model d) An early design model
Last Answer : d) An early design model
Description : If a teacher's personality is weak it is the possibility that his students inherit this trait. The reason of this saying is Options: A) Student is the miniature model of teacher's ... C) Students pass through development stages D) Students get encouragement. If they behave as their teacher
Last Answer : Students imitate his teacher's behaviour
Description : Which of the following sets represent five stages defined by Capability Maturity Model (CMM) in increasing order of maturity? (A) Initial, Defined, Repeatable, Managed, Optimized. (B) Initial, ... Initial, Defined, Managed, Repeatable, Optimized. (D) Initial, Repeatable, Managed, Defined, Optimized.
Last Answer : (B) Initial, Repeatable, Defined, Managed, Optimized.
Description : Title registration of newspaper is done by: A. RNI B. DAVP C. PIB D. IPRD
Last Answer : A. RNI
Description : Mark correct option a) Sorting mail office charged with the duty of opening the sorting mail bags received by it and deposing of their contents. b) AMPC mean automatic mail processing centre sorting is ... c) CRC mean computerized Registration centre. Regn work is done by computer d) All of these.
Last Answer : d) All of these.
Description : Intercooling in multistage compression is done A. To cool the air during compression B. To cool the air at delivery C. To enable compression in two stages D. To minimize the work of compression
Last Answer : ANSWER : D
Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Description : Which of the following has/have received „certificate of registration‟ from insurance regulator IRDAI to commence insurance business in the country? A) Sahayog Microfinance Ltd B) Aditya Birla group C) Edelweiss Financial Services D) Both A and B E) Both B and C
Last Answer : E) Both B and C Explanation: Aditya Birla Health Insurance Co today said it has received ‗certificate of registration from regulator Irda, moving a step closer to commencing business. ... General Insurance Company in India, filed by Edelweiss General Insurance Company, a wholly owned subsidiary.
Description : BCSBI registered as an independent and autonomous body under ________ A. RBI Act 1934 B. Societies Registration Act, 1860 C. Banking Regulation Act, 1949 D. The Companies Act, 1956 E. Both (B) and (C)
Last Answer : B. Societies Registration Act, 1860 Explanation: BCSBI is an independent and autonomous body, registered as a separate society under the Societies Registration Act, 1860.
Description : Regarding practice of accountancy, which of the following certificates is issued to a CPA first, a certificate of registration or a certificate of accreditation? a. Certificate of registration b. Certificate of accreditation c. Both are issued at the same time d. Neither are issued to CPAs
Last Answer : Certificate of registration
Description : Richard, CPA, performs accounting services for Norton Corporation. Norton wishes to offer shares to the public and asks Richard to audit the financial statements. Richard refers Norton to Cruz, CPA, who is more ... a. Only Richard b. Both Richard and Cruz c. Only Cruz d. Neither Richard nor Cruz
Last Answer : Both Richard and Cruz
Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B
Last Answer : d.Both A & B
Description : Work done in pushing a fluid across a boundary, Usually into or out of a system a. Flow Work b. Flow Energy c. Both a & b d. None of the above
Description : In a free expansion process (a) work done is zero (b) heat transfer is zero (c) both (a) and (b) above (d) work done is zero but heat increases (e) work done is zero but heat decreases.
Last Answer : Answer : c
Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography
Last Answer : d.Stereolithography
Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype
Last Answer : d.Virtual Prototype
Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line
Last Answer : d.Production line
Description : What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above
Last Answer : c.Lower resolution
Description : What type of inner structure makes the smoothest model in RP? a.Higher resolution b.Larger polygons c.Lower resolution d.None of the above
Last Answer : a.Higher resolution
Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation
Last Answer : b.Part orientation
Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation
Last Answer : c.Tool path generation
Description : A tessellated model is said to be valid if there are ________ a.no missing facets b.no degenerate facets c.no overlapping facets d.all of the above
Last Answer : d.all of the above
Description : STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above
Last Answer : b.geometrical data
Description : Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming
Last Answer : b.slicing
Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS
Last Answer : c.STL
Description : Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data
Last Answer : c.Tooling
Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype
Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype
Description : If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models
Last Answer : b.modules
Description : is an extension of the wireframe model with additional face information added. a.CSG b.B-rep c.Loft d.none of the above
Last Answer : b.B-rep
Description : Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above
Last Answer : c.boolean operations