Equipment level information is obtained from ____ & ____ a) name plate data & schedule information b) low unit cost & financial data c) Both a & b d) none of the above

Equipment level information is obtained from ____ & ____
a) name plate data & schedule information b) low unit cost & financial data
c) Both a & b d) none of the above
by

1 Answer

Answer :

name plate data & schedule information
by

Related questions

______ information can be derived from the financial accounting systems - utilities cost centre a) Plant level b) Plant department level c) System level d) Equipment level

Description : ______ information can be derived from the financial accounting systems - utilities cost centre a) Plant level b) Plant department level c) System level d) Equipment level

Last Answer : plant level

The next stage of monitoring process is to ____ a) study and analyze the data b) obtain a visual representation c) both a & b d) none of the above

Description : The next stage of monitoring process is to ____ a) study and analyze the data b) obtain a visual representation c) both a & b d) none of the above

Last Answer : both a & b

Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Description : Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Last Answer : energy consumption data

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)

Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above

Description : Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above

Last Answer : yield data

A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b

Description : A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b

Last Answer : High temperature

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

Data required to plot a moving annual total is ____. a) Production b) Energy c) Both a and b d) None the above

Description : Data required to plot a moving annual total is ____. a) Production b) Energy c) Both a and b d) None the above

Last Answer : Both a and b

From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Last Answer : c.Both A & B

Biomass is obtained For mixture of gas. A) Corban monoxide. C) Hydrogen. B) Both A & C. D) None of the above

Description : Biomass is obtained For mixture of gas. A) Corban monoxide. C) Hydrogen. B) Both A & C. D) None of the above

Last Answer : Both A & C. 

A better appreciation of variation is almost always obtained from a _________ a) visual presentation. b) table of number c) both a & b. d) none of the above

Description : A better appreciation of variation is almost always obtained from a _________ a) visual presentation. b) table of number c) both a & b. d) none of the above

Last Answer : visual presentation

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Energy savings is not the driving face when companies decide to purchase ___ A. New equipment C. New technologies B. Ne resources D. New low tech materials

Description : Energy savings is not the driving face when companies decide to purchase ___ A. New equipment C. New technologies B. Ne resources D. New low tech materials

Last Answer : New equipment

How can a firm provide a margin of safety if it cannot borrow on short notice to meet its needs? A. Maintain a low level of current assets (especially cash and marketable securities). B. Shorten the maturity schedule of financing. C. Increasing the level of fixed assets (especially plant and equipmentD. Lengthening the maturity schedule of financing

Description : How can a firm provide a margin of safety if it cannot borrow on short notice to meet its  needs? A. Maintain a low level of current assets (especially cash and marketable securities) ... the level of fixed assets (especially plant and equipment D. Lengthening the maturity schedule of financing

Last Answer : D. Lengthening the maturity schedule of financing

The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Last Answer : Allow consumers to compare the energy consumption of similar products

For each product under S&L scheme, BEE should upload the information on the ____ web portal A. Government C. S&L web portal B. Small scale web D. Private portal

Description : For each product under S&L scheme, BEE should upload the information on the ____ web portal A. Government C. S&L web portal B. Small scale web D. Private portal

Last Answer : S&L web portal

Subsequent to preparing ____, the team plans the project schedule and budget

Description : Subsequent to preparing ____, the team plans the project schedule and budget

Last Answer : Ans. Work Breakdown Structure

Which of the following would not fit the description of a related-party transaction? a. An unusually large sale of merchandise to the company's best and largest customer. b. Sales of merchandise between a parent company and its subsidiary. c. Exchanges of equipment between two companies owned by the same person. d. Loans to corporate officers at market rates of interest with a regular repayment schedule.

Description : Which of the following would not fit the description of a related-party transaction? a. An unusually large sale of merchandise to the company's best and largest customer. b. Sales of merchandise ... person. d. Loans to corporate officers at market rates of interest with a regular repayment schedule.

Last Answer : An unusually large sale of merchandise to the company's best and largest customer.

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

The project closing process is essential to overall project planning. What is considered one of the most important steps in closing the project? 1. Insuring that plans are produced to implement the project by phases. 2. Issuing work orders so that financial data can be collected. 3. Transition the lease of equipment to the owner 4. Satisfying the contractual obligations

Description : The project closing process is essential to overall project planning. What is considered one of  the most important steps in closing the project? 1. Insuring that plans are produced to implement ... .  3. Transition the lease of equipment to the owner  4. Satisfying the contractual obligations

Last Answer : 4. Satisfying the contractual obligations

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Following the six-tenth factor rule, if a log-log plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to (A) 0.1 (B) 0.6 (C) 0.2 (D) 0.8

Description : Following the six-tenth factor rule, if a log-log plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to (A) 0.1 (B) 0.6 (C) 0.2 (D) 0.8

Last Answer : (B) 0.6

Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Description : Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Last Answer : errors

The Model Registration fee for each model is _________ & payment can be made through ____. A. 1500rs & only bank DD. B. 1000rs & bank DD or through online. C. 10,000rs & only through online. D. None of the above.

Description : The Model Registration fee for each model is _________ & payment can be made through ____. A. 1500rs & only bank DD. B. 1000rs & bank DD or through online. C. 10,000rs & only through online. D. None of the above.

Last Answer : 10,000rs & only through online.

The ultimate aim to encourage the enterprise to save the energy , reduce the production cost and increase economic benefits is ____ A. Energy audit C. Energy saving B. Energy management D. Energy

Description : The ultimate aim to encourage the enterprise to save the energy , reduce the production cost and increase economic benefits is ____ A. Energy audit C. Energy saving B. Energy management D. Energy

Last Answer : Energy management

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

When applying for financial aid as an independent student, should I file a schedule C?

Description : When applying for financial aid as an independent student, should I file a schedule C?

Last Answer : For graduate programs, it matters little. Size of your income and resources are more important than the source. If you have low income they will make Stafford loans available to you.

The financial Powers delegated by the President of India to Various officers of the department is called as a. Rules of financial power b. Schedule of financial Powers c. None of these

Description : The financial Powers delegated by the President of India to Various officers of the department is called as a. Rules of financial power b. Schedule of financial Powers c. None of these

Last Answer : b. Schedule of financial Powers

A for-profit servic A for-profit service may expect to encounter which e may expect to encounter which of the following se of the following sequence of plans? e of plans? a)Business plan; staffing plan; work-force schedule b)Business plan; production plan; work-force schedule c)Financial plan; staffing plan; master production schedule d)Annual plan; production plan; master production schedule

Description : A for-profit servic A for-profit service may expect to encounter which e may expect to encounter which of the following se of the following sequence of plans? e of plans? a) ... )Financial plan; staffing plan; master production schedule d)Annual plan; production plan; master production schedule

Last Answer : c)Financial plan; staffing plan; master production schedule

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

Objectives of Tillage a. To destroy the prevent weeds. c) both A & B b. To reduce soil and erosion d) increase the output of work per unit time

Description : Objectives of Tillage a. To destroy the prevent weeds. c) both A & B b. To reduce soil and erosion d) increase the output of work per unit time

Last Answer : both A & B

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Production of tractors, motor, engines and process equipment is domain of organised a) Unorganised sector b) Organised sector c) Both of the above d) None of above

Description : Production of tractors, motor, engines and process equipment is domain of organised a) Unorganised sector b) rOrganised sector c) Both of the above d) None of above

Last Answer : Organised sector

The smallest unit of computerized data is referred as ____.

Description : The smallest unit of computerized data is referred as ____.  a) Bit b) Byte c) Both (a) and (b) d) None of the above

Last Answer : The smallest unit of computerized data is referred as Bit.

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

A better appreciation of variations is always obtained from______ a) energy-production relationships b) visual representation c) business process automation d) both A&C are correct

Description : A better appreciation of variations is always obtained from______ a) energy-production relationships b) visual representation c) business process automation d) both A&C are correct

Last Answer : visual representation

production has traditionally been rural level cottage industrial activity (a) Pickles (c) Rice (b) Both a & d (d) Chutneys

Description : production has traditionally been rural level cottage industrial activity (a) Pickles (c) Rice (b) Both a & d (d) Chutneys

Last Answer : Both a & d

Pick up the correct statement from the following: (A) The unit hydrograph of a specified unit duration obtained from the past data can be used to obtain the hydrograph of future storms of like duration (B) To obtain the ordinates of storm hydrograph, the ordinates of unit hydrograph are multiplied by the multiplying factor (C) The multiplying factor for storm hydrograph may be obtained by dividing the run off in mm by 25 mm (D) All the above

Description : Pick up the correct statement from the following: (A) The unit hydrograph of a specified unit duration obtained from the past data can be used to obtain the hydrograph of future storms of like duration (B) ... hydrograph may be obtained by dividing the run off in mm by 25 mm (D) All the above

Last Answer : Answer: Option D

Unit power available for crop production is about 0.54hp/ha whereas desirable level is about ……. b. 2hp/ha c. 3hp/ha d. 2.5 hp/ha

Description : Unit power available for crop production is about 0.54hp/ha whereas desirable level is about ……. b. 2hp/ha c. 3hp/ha d. 2.5 hp/ha

Last Answer : Ans- a. 1hp/ha

The first paper published on firewall technology was in ____, when engineers from Digital Equipment Corporation (DEC) developed filter systems known as packet filter firewalls: a) 1988 b) 1999 c) 1992 d) None of These

Description : The first paper published on firewall technology was in ____, when engineers from Digital Equipment Corporation (DEC) developed filter systems known as packet filter firewalls: a) 1988 b) 1999 c) 1992 d) None of These

Last Answer : a) 1988

Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Description : Factory equipment allows hermetically sealed sanitary steel cans to be manufactured and later sealed at the rate of ____ units per minute. a. 500 c. 1,000 b. 1,500 d. 1,200

Last Answer : c. 1,000

Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or expressed (b) A location, person or an item of equipment or a group of these for which costs are ascertained and used for cost control. (c) Centres having the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Description : Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed (b) A location, person or an item ... the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Last Answer : Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres