Energy substitution
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking
Last Answer : Bench marking
Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used
Description : Which is the incorrect statement about Carnot cycle? A. It is used as the alternate standard of comparison of all heat engines. B. All the heat engines are based on Carnot cycle. C. It provides concept of maximising work output between the two temperature limits. D. all of the above
Last Answer : Answer: B
Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.
Last Answer : Standards & Labelling.
Description : . Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above
Last Answer : Hyperbolic cooling
Description : Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.
Last Answer : All of the above.
Description : Efficiency of a screw jack in maximum when its 31 helix angle, ? is a.45 + ?/2 b.107 dynes c.? d.45 - ?/2 e.45?
Last Answer : d. 45 - ?/2
Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None
Last Answer : Energy Performance
Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None
Description : _____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining
Last Answer : determining
Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above
Last Answer : Energy efficiency RATIO (EER).
Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards
Last Answer : Minimum energy performance standards
Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)? A. EER = 2.34 COP B. EER = 3.24 COP C. EER = 3.42 COP D. EER = 4.23 COP
Last Answer : EER = 3.42 COP
Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed? A. Cost efficiency rating B. Energy efficiency rating C. Coefficient of performance D. Cost of performance
Last Answer : Energy efficiency rating
Description : For those who have taken synthroid (thyroid hormone replacement therapy), how long did it take before you had more energy (if any improvement was noted)?
Last Answer : My husband takes synthroid, and I'll answer as an observer. I didn't really notice that he had more energy, he still seems tired and he sleeps very deeply. He says (and has always said) that he can ... my husband were answering he would likely say that he didn't/doesn't notice any change - but I do.
Description : In a boiler, fuel substitution of coal with rice husk results in a) energy conservation b) energy efficiency c) both energy conservation and energy efficiency d) carbon neutrality
Last Answer : d) carbon neutrality
Description : Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________ percent. (A) 1 (B) 10 (C) 30 (D) 50
Last Answer : (B) 10
Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 ... dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.
Last Answer : Given that Qty of material dried per batch - 120 Kgs Moisture at inlet - 60% a. The quantity of moisture removed per batch. Water quantity in a wet batch - 120 x 0.6 = 72 Kgs. Quantity of bone dry ... - 48/0.95 = 50.5 Kgs. Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.
Description : A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency? a. 11.28 % b. 36.77 % c. 20.36 % d. 17.66 %
Last Answer : 17.66 %
Description : The efficiency of Carnot cycle is maximum for (a) gas engine (b) well lubricated engine (c) petrol engine (d) steam engine (e) reversible engine.
Last Answer : Answer : e
Description : Matching a Skylight Replacement to Your House?
Last Answer : The sad fact about buying a skylight replacement is that you're probably not going to be able to find the exact make and model of skylight as the one you're trying to replace. If you had some sort of ... the one thing about it that bugged you? Was it hard to get open? Was it perhaps a little t
Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above
Last Answer : cooling
Description : I know that so the VC300's replacement is the VC30 based on the Ssangyong Korando that came in this market since 2011 that was Only Sold in Robloxia North America and even Japan. By tho Second Generation of VC30 is replacing VC300 by March 23, 2021.?
Last Answer : By March 22, 2021 The production of VC300
Description : Which one of the following functions is served most by information technology ? (A) Replacement of human labour (B) Provision for a handle to the management to improve industrial relations (C) Substitution of human information processing (D) Rationalisation of office work
Last Answer : Answer: Rationalisation of office work
Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery
Last Answer : savings in electricity consumption
Description : 31 Scalding with steam is more severe than scalding by boiling water because A. Steam can penetrate the skin B. Steam is at a higher temperature C. Steam contains more energy than boiling water D. Steam is at a higher pressure
Last Answer : ANSWER: C
Description : Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2
Last Answer : flash steam recovery
Description : Which of the anthropogenic activity accounts for more than 2/3rd of global water consumption? (A) Agriculture (B) Hydropower generation (C) Industry (D) Domestic and Municipal usage
Last Answer : (A) Agriculture
Description : The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these
Last Answer : (A) Fuel cost per unit power generated is less
Description : The cooling by a desert Cooler is based on: (1) Hot air replacement (2) Air dehydration (3) Evaporative Cooling (4) Air Rehydration
Last Answer : (3) Evaporative Cooling Explanation: Nature's most efficient means of cooling is through the evaporation of water. Desert coolers make use of evaporative cooling that works on the principle of heat ... , energy is lost from the air, reducing the temperature. Thus, cooling effect is produced.
Last Answer : Evaporative Cooling
Description : Project risk management is best described as: a. managing responses to threats. b. identifying and acknowledging threats and opportunities. c. planning responses to threats. d. minimising threats and maximising opportunities.
Last Answer : d. minimising threats and maximising opportunities.
Description : Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or expressed (b) A location, person or an item ... the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment
Last Answer : Unit of quantity of product, service or time in relation to which costs may be ascertained or expressed
Description : A profit centre is a centre (a) Where the manager has the responsibility of generating and maximising profits (b) Which is concerned with earning an adequate Return on Investment (c) Both of the above (d) Which manages cost
Last Answer : (a) Where the manager has the responsibility of generating and maximising profits
Description : Utilitarian moral philosophies focus on A)the Golden Rule. B)the rights of individuals and the intentions associated with a particular behaviour. C)maximising the greatest good for specific individuals ... of people. E)resolving conflicts and ensuring mutual benefit for all members of society.
Last Answer : D)maximising the greatest good for the greatest number of people.
Description : Moral philosophies: A)are concerned with maximising the greatest good for the greatest number of people. B)are principles or rules that individuals use to determine what is right or wrong C)focus on the intentions associated with a particular behaviour and on the rights of the individual.
Last Answer : B)are principles or rules that individuals use to determine what is right or wrong
Description : Ethical formalism philosophies focus on A)the rights of consumers and the greatest good for society. B)situational ethics and increasing profits C)maximising the greatest good for the greatest number of people. D)the intentions associated with a particular behaviour and the rights of the individual.
Last Answer : D)the intentions associated with a particular behaviour and the rights of the individual.
Description : Moral philosophies A)are concerned with maximising the greatest good for the greatest number of people. B)are principles or rules that individuals use to determine what is right or wrong. C)focus on ... and on the rights of the individual. D)remain consistent in both work and family situations.
Last Answer : B)are principles or rules that individuals use to determine what is right or wrong.
Description : In Herbert Simon's theory, a manager who accepts the first satisfactory solution to a problem has made a ______ decision, while a manager who continues to search for the best possible solution is ... ; satisficing ; (b) Minimising; maximizing ; (c) Satisficing; maximising (d) Maximising; minimizing
Last Answer : (b) Minimising; maximizing ;
Description : Which of the following is a core management feature offered by most cloud management service products? a) Support of different cloud types b) Creation and provisioning of different types of cloud ... and uptime, response time, resource quota usage, and other characteristics d) All of the mentioned
Last Answer : All of the mentioned
Description : State which of the one is false A. In performance testing, usage of tool is a must B. In database testing, database knowledge is a must. C. In Functional Testing, knowledge of business logic is a must D. None of the above.
Last Answer : D. None of the above.
Description : Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool
Last Answer : manual tool
Description : Most important objective of mixed farming is — a. Subsistence b. Income generation c. Soil fertility improvement d. Soil conservation
Last Answer : a. Subsistence
Description : For maximum efficiency in learning a given passage for one single production (for example a school play), it is best to have Options: A) Many relatively short practice periods ... before the performance is required D) Relatively long practice periods concentrated just before performance is required
Last Answer : D) Relatively long practice periods concentrated just before performance is required
Description : Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan
Last Answer : C. Process Improvement Plan
Description : The concept that consumers will favor those products which offer maximum quality performance and features and asks for continuous product improvement is 1. Marketing concept 2. Product concept 3. Production concept 4. All the above 5. None of these
Last Answer : Marketing concept
Description : Continuous improvement is synonymous with a. Step changes changes b. BPR c. Kaizen d. The performance- performance-importance importance matrix
Last Answer : c. Kaizen
Description : What are the 3 mechanism to achieve performance improvement?
Last Answer : i. Relevance feedback ii. Document classification iii. Document clustering