Moldboard consists of following types : a) General purpose. c) Sod or breaker b) Stubble. d) All of the above

Moldboard consists of following types : a) General purpose. c) Sod or breaker b) Stubble. d) All of the above
by

1 Answer

Answer :

All of the above
by

Related questions

This type mould boars plough is used for sticky soil. b. Sod or breaker c. Stubble d. None of the above

Description : This type mould boars plough is used for sticky soil. b. Sod or breaker c. Stubble d. None of the above

Last Answer : Ans –a. Slat type

is the general purpose lying. a) Between stubble and sod b) Between soil and mud c) Between man and machine d) None

Description : is the general purpose lying. a) Between stubble and sod b) Between soil and mud c) Between man and machine d) None

Last Answer :   <!-- [endif] -->Between stubble and sod

A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Description : A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Last Answer : b. sod bottom

A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Description : A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Last Answer : b. General bottom

A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Last Answer : a. Sod bottom

are the types of moldboards. a) General purpose b) Stubble c) Slat d) All of above

Description : are the types of moldboards. a) General purpose b) Stubble c) Slat d) All of above

Last Answer : all of above

are the types of moldboards. a) General purpose b) Stubble c) Slat d) All of above

Description : are the types of moldboards. a) General purpose b) Stubble c) Slat d) All of above

Last Answer : All of above

is used in tough soil of grasses. a) Soil b) Sod & Breaker type c) Slat type d) Plough

Description : is used in tough soil of grasses. a) Soil b) Sod & Breaker type c) Slat type d) Plough

Last Answer : Sod & Breaker type

Select the function of Moldboard plough. a) Lifting the soil. c) Pulverizing the soil b) Cutting the furrow slice d) All of the above

Description : Select the function of Moldboard plough. a) Lifting the soil. c) Pulverizing the soil b) Cutting the furrow slice d) All of the above

Last Answer :  All of the above

Stubble bottom mold board is used where a) Pulverization is needed b) Inversion is needed c) Both d) None of these Ans. a

Description : Stubble bottom mold board is used where a) Pulverization is needed b) Inversion is needed c) Both d) None of these Ans. a

Last Answer : ans a

This type mould boards plough is used for tough soil of grasses. a. slat c. Stubble d. None of the above

Description : This type mould boards plough is used for tough soil of grasses. a. slat c. Stubble d. None of the above

Last Answer : Ans- b. Sod or breaker

turns the furrow slice used in stubble soils. a) Stubble type b) Slat type c) Share d) Jointer

Description : turns the furrow slice used in stubble soils. a) Stubble type b) Slat type c) Share d) Jointer

Last Answer :    <!-- [endif] -->Stubble type

Sod bottom mold board is used where a) Pulverization is needed b) Inversion is needed c) Both d) None of these Ans. b

Description : Sod bottom mold board is used where a) Pulverization is needed b) Inversion is needed c) Both d) None of these Ans. b

Last Answer : ans b

Mention the purpose of SID and SOD lines

Description : Mention the purpose of SID and SOD lines

Last Answer : SID (Serial input data line): It is an input line through which the microprocessor accepts serial data. SOD (Serial output data line): It is an output line through which the microprocessor sends output serial data.

what are the differences in types of sod?

Description : what are the differences in types of sod?

Last Answer : Need Answer

Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of a ______________. A. cylindrical spring on the contact arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Description : Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of ... arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Last Answer : Answer: C

This is for those of you who shave down there... not wax. How do you get past the stubble?

Description : This is for those of you who shave down there... not wax. How do you get past the stubble?

Last Answer : I HATE shaving the bikini area… I use Nair. It’s far less painful growing back in for me.

The tillage that is done immediately after crop harvesting to remove the weeds and to restore soil structure is? A. strip B. sub-soil C. fallow D. stubble

Description : The tillage that is done immediately after crop harvesting to remove the weeds and to restore soil structure is? A. strip B. sub-soil C. fallow D. stubble

Last Answer : D. stubble

.total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Description : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Last Answer : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above

Description : 267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above

Last Answer : d)All of the above

V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Description : V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Last Answer : b) Stubble mulch tillage

What Is The Use Of Vacuum Breaker?

Description : What Is The Use Of Vacuum Breaker?

Last Answer : It is used to remove Vacuum (Air Bubbles) from Water line.

how did my new sod get webworms

Description : how did my new sod get webworms

Last Answer : Need Answer

Just put down palmetto sod how much do I water to start the yard is really shaded

Description : Just put down palmetto sod how much do I water to start the yard is really shaded

Last Answer : Water in the morning for about an hour, then in the evening dig down 6" and if you fell moisture then water less, if it feels dry, repeat the morning wattering until you can feel moisture.

How to get rid of mushrooms growing in my new sod yard.

Description : How to get rid of mushrooms growing in my new sod yard.

Last Answer : what a shame....if it's not too many...you could use straight white vinegar in an old pointed top mustard container.......................if that does not work for you...this is a ... & pets away until a good rain washed it in....also whereever you bought your sod might even have a better idea.

Can you lay sod on top of dirt that is on top of existing grass?

Description : Can you lay sod on top of dirt that is on top of existing grass?

Last Answer : That is a hard question to answer.....but I would think that the new sod over old grass might work if the old grass is cut super short.............then the new sod has to be kept wet until the new sod takes.

What plains Indians lived On the great plains where would you find lodges covered in sod?

Description : What plains Indians lived On the great plains where would you find lodges covered in sod?

Last Answer : What is the answer ?

Can pallet jacks be used for moving sod?

Description : Can pallet jacks be used for moving sod?

Last Answer : In the past I have worked for a landscaper and we used pallet jacks to move pallets of sod across driveways/patios/etc. You just need to make sure that the total load of the pallet is within the duty range for your jack.

Is it possible to use pallet jacks for moving sod?

Description : Is it possible to use pallet jacks for moving sod?

Last Answer : Yes it is, but not recommended.

What were the advantages and disadvantages of sod house?

Description : What were the advantages and disadvantages of sod house?

Last Answer : thermally advantageous and cheap but the downside is you will have dirt,mud,grass in your house

G lucose on reduct ion w ith sod ium amalgam forms (A) Dulcitol (B) Sorbitol (C) Mannitol (D) Mannitol and sorbitol

Description : G lucose on reduct ion w ith sod ium amalgam forms (A) Dulcitol (B) Sorbitol (C) Mannitol (D) Mannitol and sorbitol

Last Answer : B

Can sod be composted without continually resprouting?

Description : Can sod be composted without continually resprouting?

Last Answer : Yes. Sod should be stacked upside down in piles covered with black plastic to exclude light and stop all growth. Wet each layer as you stack it. Peel the black plastic back every few months and re-wet the pile, then recover. In one year you’ll have rich soil-like compost.

SOD pin can drive a D flip-flop? a) SOD cannot drive any flip-flops. b) SOD cannot drive D flip-flop, but can drive any other flop-flops. c) Yes, SOD can drive D flop-flop. d) No, SOD cannot drive any other flop-flops except D flop-flop

Description : SOD pin can drive a D flip-flop? a) SOD cannot drive any flip-flops. b) SOD cannot drive D flip-flop, but can drive any other flop-flops. c) Yes, SOD can drive D flop-flop. d) No, SOD cannot drive any other flop-flops except D flop-flop

Last Answer : b) SOD cannot drive D flip-flop, but can drive any other flop-flops

Select the antibiotic which is equally effective whether injected 8 hourly or 24 hourly, provided the total daily dose remains the same: A. Gentamicin B. Sod. penicillin G C. Cefazolin D. Vancomycin

Description : Select the antibiotic which is equally effective whether injected 8 hourly or 24 hourly, provided the total daily dose remains the same: A. Gentamicin B. Sod. penicillin G C. Cefazolin D. Vancomycin

Last Answer : A. Gentamicin

The following purgative stimulates intestinal motility independent of its action on mucosal fluid dynamics: A. Castor oil B. Senna C. Docusates D. Sod.pot. tartrate

Description : The following purgative stimulates intestinal motility independent of its action on mucosal fluid dynamics: A. Castor oil B. Senna C. Docusates D. Sod.pot. tartrate

Last Answer : B. Senna

Choose the preparation(s) of vitamin K that should not be injected in the newborn: A. Phytonadione B. Menadione C. Menadione sod.diphosphate D. Both ‘B’ and ‘C’

Description : Choose the preparation(s) of vitamin K that should not be injected in the newborn: A. Phytonadione B. Menadione C. Menadione sod.diphosphate D. Both ‘B’ and ‘C’

Last Answer : D. Both ‘B’ and ‘C’

Tolerance does not develop to the vasodilator action of sodium nitroprusside while it develops to glyceryl trinitrate because: A. Intact sod. nitroprusside molecule acts like nitric oxide B. Enzymes which generate nitric oxide from nitroprusside are different C. Sod. nitroprusside has a long duration of action D. Sod. nitroprusside has additional K+ channel opening action

Description : Tolerance does not develop to the vasodilator action of sodium nitroprusside while it develops to glyceryl trinitrate because: A. Intact sod. nitroprusside molecule acts like nitric oxide B. Enzymes which ... a long duration of action D. Sod. nitroprusside has additional K+ channel opening action

Last Answer : B. Enzymes which generate nitric oxide from nitroprusside are different

The type II, type III and type IV hypersensitivity reactions can be suppressed by: A. Adrenaline B. Antihistaminics C. Corticosteroids D. Sod. cromoglycate

Description : The type II, type III and type IV hypersensitivity reactions can be suppressed by: A. Adrenaline B. Antihistaminics C. Corticosteroids D. Sod. cromoglycate

Last Answer : C. Corticosteroids

Choose the correct statement about use of gold sod. thiomalate in rheumatoid arthritis: A. It affords more rapid symptomatic relief than NSAIDs B. The NSAIDs therapy is discontinued when it is started C. It is used as an alternative to corticosteroids D. It is used only in severe cases when other diseases modifying antirheumatic drugs have failed

Description : Choose the correct statement about use of gold sod. thiomalate in rheumatoid arthritis: A. It affords more rapid symptomatic relief than NSAIDs B. The NSAIDs therapy is discontinued when it is ... D. It is used only in severe cases when other diseases modifying antirheumatic drugs have failed

Last Answer : D. It is used only in severe cases when other diseases modifying antirheumatic drugs have failed

The following nonsteroidal antiinflammatory drug is a preferential cyclooxygenase-2 (COX-2) inhibitor: A. Tenoxicam B. Meloxicam C. Diclofenac sod. D. Ketoprofen

Description : The following nonsteroidal antiinflammatory drug is a preferential cyclooxygenase-2 (COX-2) inhibitor: A. Tenoxicam B. Meloxicam C. Diclofenac sod. D. Ketoprofen

Last Answer : B. Meloxicam

The type II, type III and type IV hypersensitivity reactions can be suppressed by: A. Adrenaline B. Antihistaminics C. Corticosteroids D. Sod. cromoglycate

Description : The type II, type III and type IV hypersensitivity reactions can be suppressed by: A. Adrenaline B. Antihistaminics C. Corticosteroids D. Sod. cromoglycate

Last Answer : C. Corticosteroids

How To Make A Garden Sod

Description : How To Make A Garden Sod

Last Answer : You are bored from too much television. Slowly, you march out the front door to get a little sunshine in your system. What you see comes as a very unpleasant surprise. Your tiny grassland of a garden ... a new garden. It's time to invite your friends and neighbors over for a great weekend cookout.

How to Lay Sod

Description : How to Lay Sod

Last Answer : How to Lay Sod If your lawn looks boring, there's one do-it-yourself task you can try to improve it: laying sod. Sod transforms a barren lawn into an impressive landscaped area. Here's how to ... lawn loom lovely and well-kept. Apply it properly and your landscape will be the envy of your neighbors.

State the functions of following pins of 8085 1) SOD 2) HLDA

Description : State the functions of following pins of 8085 1) SOD 2) HLDA

Last Answer : 1) SOD: Serial Output data SOD pin is used to transmit data serially from accumulator to the external devices connected to the pin.  2) HLDA: Microprocessor generates HLDA signal to acknowledge requesting device after HOLD signal.

In the illustration, the purpose of part B is to _________. EL-0033 A. increase resistance in series with the contacts as they close to prevent arcing B. create a magnetic field in the steel plates that interacts with the arc to cool and extinguish the arc C. cause the contacts to open in the event of an overload D. provide ventilation to the contact when the breaker is close to rated capacity

Description : In the illustration, the purpose of part B is to _________. EL-0033 A. increase resistance in series with the contacts as they close to prevent arcing B. create a magnetic field in the steel ... event of an overload D. provide ventilation to the contact when the breaker is close to rated capacity

Last Answer : Answer: B

The purpose of a main switchboard circuit breaker's reverse-power trip is to _____________. A. prevent main circuit overload B. protect the circuit breaker blowout coil C. prevent alternator motorization D. prevent low voltage tripout

Description : The purpose of a main switchboard circuit breaker's reverse-power trip is to _____________. A. prevent main circuit overload B. protect the circuit breaker blowout coil C. prevent alternator motorization D. prevent low voltage tripout

Last Answer : Answer: C

What is the purpose of compressed air in SF6 breaker?

Description : What is the purpose of compressed air in SF6 breaker?

Last Answer : This used for drive for opening and closing of the contacts. (Arc quenching is taken care by SF6 gas) 

What is the purpose of header breaker in water circuit?

Description : What is the purpose of header breaker in water circuit?

Last Answer : The header breaker ensures oil pressure greater than that of water pressure always. Therefore there is no leak of water into oil.  

Purpose of Local breaker back-up relay; type -CTIG

Description : Purpose of Local breaker back-up relay; type -CTIG

Last Answer : To safe guard against the drastic consequences of failure to clear faults rapidly, many power supply authorities install 2 independent systems of protection for major transmission lines. There remains however the ... reset, which enables the time delay to be set closer to the breaker trip-time. 

What is the purpose of spring charging in 415 V breaker?

Description : What is the purpose of spring charging in 415 V breaker? 

Last Answer : If the breaker is to be closed and tripped manually the closing time and tripping time would vary from person to person. Also it would not be very fast. So spring charging is provided. It ... timings irrespective of the operator and its action is fast and closing and tripping time is very less.