Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d

Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d
by

1 Answer

Answer :

 Ans. d

by

Related questions

is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Description : is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Last Answer : Trailed type implement

An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Description : An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Last Answer : Trailed implement

Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d

Description : Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d

Last Answer : Ans. d

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Description : The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Last Answer : d) Between two lower links

Weight transfer in a tractor in a tractor implement system is caused by 1. Application of pull 2. Tractor force 3. Tractor slip 4. Weight of operator

Description : Weight transfer in a tractor in a tractor implement system is caused by 1. Application of pull 2. Tractor force 3. Tractor slip 4. Weight of operator

Last Answer : ans 1

Weight transfer in a tractor in a tractor implement system is caused by A. Application of Pull. B. Tractor force C. Tractor slip. D. Weight of operator

Description : Weight transfer in a tractor in a tractor implement system is caused by A. Application of Pull. B. Tractor force C. Tractor slip. D. Weight of operator

Last Answer : Application of Pull

In disc harrow, the penetration of disc improves by: a) Increasing disc angle c) Lowering hitch point b) Regulating optimum speed d) All are correct

Description : In disc harrow, the penetration of disc improves by: a) Increasing disc angle c) Lowering hitch point b) Regulating optimum speed d) All are correct

Last Answer : Increasing disc angle 

The primary benefit of the three-point hitch system is to transfer the and resistance A. Arm. C. Volume B. Body D. Weight

Description : The primary benefit of the three-point hitch system is to transfer the and resistance A. Arm. C. Volume B. Body D. Weight

Last Answer : Body D. Weight

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

Inflation pressure in the rear wheels of the tractor varies between a) 0.5 to 1.2 kg/cm2 b) 8 to 1.2 kg/cm2 c) 2 to 1.5 kg/cm2 d) 1.5 to 20 kg/cm2

Description : Inflation pressure in the rear wheels of the tractor varies between a) 0.5 to 1.2 kg/cm2 b) 8 to 1.2 kg/cm2 c) 2 to 1.5 kg/cm2 d) 1.5 to 20 kg/cm2

Last Answer : b) 8 to 1.2 kg/cm2

The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Last Answer : Ans.c

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Castor angle is essentially related to a) Drive wheels b) Steered wheels c) Towed wheels d) Self-propelled wheels Ans. b

Description : Castor angle is essentially related to a) Drive wheels b) Steered wheels c) Towed wheels d) Self-propelled wheels Ans. b

Last Answer : Ans. b

tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Description : tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Last Answer : <!-- [if !supportLists] -->a.                <!-- [endif] -->Ans- c. crawler

A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Description : A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Last Answer : Lighter soil

is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Description : is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Last Answer : Truck

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Last Answer : ans a

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

A tractor seat suspension should have its natural frequency in the range of a) 0.5 to 2.0 Hz b) 2.0 to 4.0 Hz c) 4.0 to 6.0 Hz d) 6.0 to 8.0 Hz Ans. a

Description : A tractor seat suspension should have its natural frequency in the range of a) 0.5 to 2.0 Hz b) 2.0 to 4.0 Hz c) 4.0 to 6.0 Hz d) 6.0 to 8.0 Hz Ans. a

Last Answer : ans a

In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Description : In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Last Answer : ans 1

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

In a free expansion process  (a) work done is zero  (b) heat transfer is zero  (c) both (a) and (b) above  (d) work done is zero but heat increases  (e) work done is zero but heat decreases.

Description : In a free expansion process  (a) work done is zero  (b) heat transfer is zero  (c) both (a) and (b) above  (d) work done is zero but heat increases  (e) work done is zero but heat decreases.

Last Answer : Answer : c

raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Description : raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Last Answer : a) More rapid acceleration of any soil particles that is moved appreciably

What is the best reason to implement a security policy? A. It increases security. B. It makes security harder to enforce. C. It removes the employee’s responsibility to make judgments. D. It decreases security.

Description : What is the best reason to implement a security policy? A. It increases security. B. It makes security harder to enforce. C. It removes the employee’s responsibility to make judgments. D. It decreases security.

Last Answer : C. It removes the employee’s responsibility to make judgments.

Hand brake is applicable to (A) only front wheels (B) only rear wheels (C) both front and rear wheels (D) all of the above

Description : Hand brake is applicable to (A) only front wheels (B) only rear wheels (C) both front and rear wheels (D) all of the above

Last Answer : (B) only rear wheels

Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Description : Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Last Answer : B. Only rear wheels

Is there a way of shortening a link like the following?

Description : Is there a way of shortening a link like the following?

Last Answer : answer:If I understand your question, check out tinyurl.com http://tinyurl.com/ Click on this: http://tinyurl.com/84lhusm

Hydraulic system is mainly used for operatinga) one point hitch b) two point hitch c) three point hitch d) four pond hitch.

Description : Hydraulic system is mainly used for operatinga) one point hitch b) two point hitch c) three point hitch d) four pond hitch.

Last Answer : c) three point hitch

How to Attach Wheels to a Chicken Tractor?

Description : How to Attach Wheels to a Chicken Tractor?

Last Answer : Chicken tractors can be helpful for moving around your yard for the purposes of letting your chickens run around on fresh grass. You may not be able to easy move around your chicken tractor, however, ... needing to be able to raise your chicken tractor a full inch higher than it currently is.You wi

As a result of spinning sometimes one of the drive wheels of a tractor happens to meet a a) hard ground b) soft ground c) muddy gourd d ) wet ground.

Description : As a result of spinning sometimes one of the drive wheels of a tractor happens to meet a a) hard ground b) soft ground c) muddy gourd d ) wet ground.

Last Answer : b) soft ground

While Lilo was playing with a toy tractor, she rolled it over an ink drop. The image on the right shows the ink drop and the marks on the floor left by tractor’s wheels. The diameter of the back wheel of the tractor is 1.5 times that of its front wheel. What is the number of revolutions made by the front wheel between the ink drop and the last mark?

Description : While Lilo was playing with a toy tractor, she rolled it over an ink drop. The image on the right shows the ink drop and the marks on the floor left by tractor's wheels. The diameter of the back ... is the number of revolutions made by the front wheel between the ink drop and the last mark?

Last Answer : 6

As you go up a mountain top, your weight: w) increases slightly x) decreases slightly y) remains exactly the same.

Description : As you go up a mountain top, your weight: w) increases slightly x) decreases slightly y) remains exactly the same.

Last Answer : ANSWER: X -- DECREASES SLIGHTLY

The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Description : The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c ... the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Last Answer : ans d

Farm tractor hoe is also called as a A. Hoe remover C. Hoe weight loader B. Hoe Loader D. Hoe Weight remover

Description : Farm tractor hoe is also called as a A. Hoe remover C. Hoe weight loader B. Hoe Loader D. Hoe Weight remover

Last Answer : Hoe Loader 

Notched disc blades on disc harrows are provided to a) Enhance penetration b) Improve balancing of gangs c) Save on steel d) Reduce draft

Description : Notched disc blades on disc harrows are provided to a) Enhance penetration b) Improve balancing of gangs c) Save on steel d) Reduce draft

Last Answer : ans a

It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above

Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above

Last Answer : Ans- a. Chisel plough

The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Description : The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Last Answer : 40,45

Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate

Description : Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate

Last Answer : Heat wheels

In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator

Description : In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator

Last Answer : Heat wheels

The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Description : The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Last Answer : (B) Toor and Marcello

Penetration model (theory) for mass transfer was enunciated by (A) Danckwerts (B) Toor and Marcello (C) Higbie (D) Kissinevskii

Description : Penetration model (theory) for mass transfer was enunciated by (A) Danckwerts (B) Toor and Marcello (C) Higbie (D) Kissinevskii

Last Answer : (C) Higbie

Mass transfer co-efficient is directly proportional to DAB 0.5 , according to __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Description : Mass transfer co-efficient is directly proportional to DAB 0.5 , according to __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Last Answer : (A) Penetration

Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Description : Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Last Answer : (A) D0.5

Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Description : Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Last Answer : (A) Film

Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Description : Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Last Answer : (B) K ∝√D

Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Description : Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Last Answer : (B) Film

As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; melting point increases. (c) boiling point increases ; melting point decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Description : As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; ... decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Last Answer : boiling point increases ; melting point increases sequentially for alkanes over four carbons.