Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above
Last Answer : Answer: Option D
Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle
Last Answer : Answer: Option A
Description : The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes
Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above
Description : In stone masonry, if stones are so placed that their layers are parallel to the direction of load, they (A) Split easily (B) Are affected by moisture (C) Both (A) and (B) (D) None of these
Last Answer : Answer: Option C
Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above
Description : Lime stones are generally known as (A) Aqueous rocks (B) Sedimentary rocks (C) Stratified rocks (D) All the above
Description : In the construction of an RPD, guiding planes are created, A. Perpendicular to the occlusal plane B. Parallel towards the path of placement.
Last Answer : B. Parallel towards the path of placement.
Description : In translational slides, movement _______ to planes of weakness and occasionally _____to slope. (A) Parallel, parallel (B) Parallel, perpendicular (C) Perpendicular, parallel (D) Perpendicular, perpendicular
Last Answer : (A) Parallel, parallel
Description : Forces are called concurrent when their lines of action meet in (A) One point (B) Two points (C) Plane (D) Perpendicular planes
Last Answer : (A) One point
Description : What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω
Last Answer : D. 75 Ω
Description : Forces are called coplanar when all of them acting on body lie in (A) One point (B) One plane (C) Different planes (D) Perpendicular planes
Last Answer : (B) One plane
Description : The approximate formula for radial or perpendicular offsets from the tangent, is (A) x/2R (B) x²/2R (C) x/R (D) x²/R
Last Answer : (B) x²/2R
Description : Setting out of Lemniscate transition curves, is done with (A) Perpendicular offsets (B) Radial offsets (C) Deflection angles (D) Polar deflection angles
Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip
Last Answer : b.parallel to the nearest external surface
Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these
Description : Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan
Description : Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure
Description : True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
Last Answer : Answer: Option B
Description : The assumption on which the trapezoidal formula for volumes is based, is (A) The end sections are parallel planes (B) The mid-area of a pyramid is half the average area of the ends (C) The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied (D) All the above
Last Answer : (D) All the above
Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 ... (B) 2 : 1½ : 1 (C) 1 : 1 : 2 (D) None of these
Last Answer : (C) 1 : 1 : 2
Description : The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise
Description : Load acting on bearing in its plane of rotation is called as a... A. Radial load B. Axial load C. Perpendicular load D. Thrust load
Last Answer : A. Radial load
Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches
Last Answer : (B) Broken glass coping
Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall
Last Answer : (D) Half brick wall
Description : A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls
Description : A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches
Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches
Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above
Description : In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above
Description : The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate
Last Answer : (A) Total latitude
Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)
Last Answer : (A) AB/(cot b - cot a)
Description : The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)
Last Answer : (C) Both (a) and (b
Description : During seepage through a soil, direction of seepage is always (A) Parallel to equipotential lines (B) Perpendicular to stream lines (C) Perpendicular to equipotential lines (D) None of these
Description : The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less ... D) Parallel to stratification may or may not be greater than that perpendicular to stratification
Description : A repelling groyne is aligned (A) Pointing upstream (B) Pointing downstream (C) Perpendicular to bank (D) Parallel to bank
Description : When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these
Description : Location of soundings by two angles from the shore requires establishing (A) One range line parallel to shore (B) One range line perpendicular to shore (C) Two range lines mutually perpendicular (D) No range line
Last Answer : (D) No range line
Description : Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind
Last Answer : (C) Is a current parallel to the shore, caused due to tangential component of the wind
Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct
Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid
Description : In which of the following directions, the strength of timber is maximum? (A) Parallel to grains (B) 45° to grains (C) Perpendicular to grains (D) Same in all directions
Description : Consider the following pre-conditions for correct use of a theodolite: 1. The vertical axis need not be perpendicular to the plane of the plate level bubble. 2. The line of sight must be perpendicular to the horizontal axis. 3. The axis of ... ? (a) 1, 2, 3 & 4 (b) 2 only (c) 3 only (d) 1 & 4 only
Last Answer : (b) 2 only
Description : A hundred stones are placed, in a straight line, a yard distant from each other. How many yards must a person walk, who undertakes to pick them up, and place them in a basket stationed one yard from the first stone? -Riddles
Last Answer : In solving this question it is clear that to pick up the first stone and put it into the basket, the person must walk two yards, one in going for the stone and another in returning with it; that ... one does not see why we multiply 202 by 50 in getting the answer, we refer him to his arithmetic.
Description : The Westergaard analysis is used for (A) Sandy soils (B) Cohesive soils (C) Stratified soils (D) Clayey soils
Last Answer : (C) Stratified soils
Description : The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes
Description : The wedging is adopted for quarrying costly stratified rock such as (A) Laterite (B) Marble (C) Limestone (D) All the above
Description : Lime stone is not a (A) Sedimentary rock (B) Stratified rock (C) Aqueous rock (D) Metamorphic rock