A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches

A bull nose brick is not used for
(A) Rounding off sharp corners
(B) Pillars
(C) Decoration purpose
(D) Arches
by

1 Answer

Answer :

Answer: Option D
by

Related questions

A group of ornamental plants used to grow over walls, trellis, arches, pergolas, arbours, pillars, bowers etc.

Description : A group of ornamental plants used to grow over walls, trellis, arches, pergolas, arbours, pillars, bowers etc.

Last Answer : Ans. Climbers and Creepers

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Last Answer : (D) Half brick wall

Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Description : Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Last Answer : The answer is 'Rampurva'

Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Description : Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Last Answer : answer:

Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Description : Which site, where Ashokan pillars exist, has the bull capital? -General Knowledge

Last Answer : answer:

Which site, where Ashokan pillars exist, has the bull capital?

Description : Which site, where Ashokan pillars exist, has the bull capital?

Last Answer : Rampurva

Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Description : Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Light bends around sharp corners as a result of w) refraction x) reflection y) diffraction z) dispersion

Description : Light bends around sharp corners as a result of w) refraction x) reflection y) diffraction z) dispersion

Last Answer : ANSWER: Y -- DIFFRACTION

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

What's the purpose of decorative towels besides decoration?

Description : What's the purpose of decorative towels besides decoration?

Last Answer : It’s like putting a piece of carpet on a toilet seat, give your head a wobble This idiotic trend should be known as the “Trump hair” phenomenon

Those cutout windows on pickup trucks... Do they serve a purpose or are they just for decoration?

Description : Those cutout windows on pickup trucks... Do they serve a purpose or are they just for decoration?

Last Answer : It allows the driver to see down to the road to see, for instance, whether they’re about to run some poor, unsuspecting Honda Civic driver off into the median.

There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 : 1½ : 2 (B) 2 : 1½ : 1 (C) 1 : 1 : 2(D) None of these

Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and  each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be  in the ratio of  (A) 1 ... (B) 2 : 1½ : 1  (C) 1 : 1 : 2 (D) None of these

Last Answer : (C) 1 : 1 : 2 

In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Description : In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Last Answer : Answer: Option C

A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Description : A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Last Answer : Answer: Option D

The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Description : The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Last Answer : Answer: Option B

Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Last Answer : Answer: Option C

The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the abo

Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above

Last Answer : Answer: Option D

In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Description : In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Last Answer : Answer: Option C

Reference pillars fixed on the centre line of a proposed road, provide the following information: (A) Reduced distance (R.D.) (B) Horizontal distance of road from the centre line (C) Reduced level at the top of pillar (D) All the above

Description : Reference pillars fixed on the centre line of a proposed road, provide the following information: (A) Reduced distance (R.D.) (B) Horizontal distance of road from the centre line (C) Reduced level at the top of pillar (D) All the above

Last Answer : Answer: Option D

If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by (A) (5/6) (r/1 + r²) M (B) (5/6) (r²/1 + r²) M (C) (5/6) (r²/1 + r3 ) M (D) (5/6) (r²/1 + r4 ) M

Description : If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by (A) (5/6) (r/1 + r²) M (B) (5/6) (r²/1 + r²) M (C) (5/6) (r²/1 + r3 ) M (D) (5/6) (r²/1 + r4 ) M

Last Answer : Answer: Option D

Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by (A) Rankine formula (B) Marcus formula (C) Rankine Grashoff formula (D) Grashoff formula

Description : Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by (A) Rankine formula (B) Marcus formula (C) Rankine Grashoff formula (D) Grashoff formula

Last Answer : Answer: Option C

A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Description : A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Last Answer : Answer: Option D

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Description : For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Last Answer : Answer: Option A

A slab simply supported on the four edges, with corners not held down and carrying uniformly distributed load, is used in (a) Singly storeyed buildings. (b) Double storeyed buildings. (c) Multi storeyed buildings (d) All the above

Description : A slab simply supported on the four edges, with corners not held down and carrying uniformly distributed load, is used in (a) Singly storeyed buildings. (b) Double storeyed buildings. (c) Multi storeyed buildings (d) All the above

Last Answer : (a) Singly storeyed buildings.

A two way slab (a) May be simply supported on the four edges, with comers not held down and carrying uniformly distributed load. (b) May be simply supported on the four edge , with corners held down and carrying uniformly distributed load. (c) May have edges fixed or continuous and carrying uniformly distributed load. (d) All the above.

Description : A two way slab (a) May be simply supported on the four edges, with comers not held down and carrying uniformly distributed load. (b) May be simply supported on the four edge , with corners held ... . (c) May have edges fixed or continuous and carrying uniformly distributed load. (d) All the above.

Last Answer : (d) All the above.

Slabs which are supported in such a way that the corners are prevented from lifting are referred to as; [ A ] One way slabs [ B ] Two way slabs [ C ] Restrained slabs [ D ] Unrestrained slabs.

Description : Slabs which are supported in such a way that the corners are prevented from lifting are referred to as; [ A ] One way slabs [ B ] Two way slabs [ C ] Restrained slabs [ D ] Unrestrained slabs.

Last Answer : [ C ] Restrained slabs

The slab is said to be orthotropically reinforced , when the reinforcement is arranged in; [ A ] Single direction [ B ] Two directions at right angles with equal meshes [ C ] Two directions at right angles with unequal meshes [ D ] At the corners only

Description : The slab is said to be orthotropically reinforced , when the reinforcement is arranged in; [ A ] Single direction [ B ] Two directions at right angles with equal meshes [ C ] Two directions at right angles with unequal meshes [ D ] At the corners only

Last Answer : [ C ] Two directions at right angles with unequal meshes

"I'm not going to be rounding people up and deporting them. We're going to put in place a permanent solution." How do you feel about Romney's anti-deportation stance?

Description : "I'm not going to be rounding people up and deporting them. We're going to put in place a permanent solution." How do you feel about Romney's anti-deportation stance?

Last Answer : answer:Sounds Hitlerish. Does “final solution” ring a bell? I doubt that is what he meant, but he could have made a better – less idiotic – sentence.

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

What is the answer for rounding 133 to the nearest 10?

Description : What is the answer for rounding 133 to the nearest 10?

Last Answer : 12

What is 83479 rounding of to nearest 10?

Description : What is 83479 rounding of to nearest 10?

Last Answer : 8010

What is 138 rounding to the nearest 10?

Description : What is 138 rounding to the nearest 10?

Last Answer : 140

What is 77.5 rounding decimals?

Description : What is 77.5 rounding decimals?

Last Answer : To the nearest tenth, 77.5To the nearest whole number, 78

What is 805.6 rounding of to nearest whole number?

Description : What is 805.6 rounding of to nearest whole number?

Last Answer : The number 805.6 is rounded up to 806, the nearest wholenumber.

What is 7.29 rounding to 1 decimal place?

Description : What is 7.29 rounding to 1 decimal place?

Last Answer : 7.3

What is 199 rounding to the nearest ten?

Description : What is 199 rounding to the nearest ten?

Last Answer : Feel Free to Answer

Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.?

Description : Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.?

Last Answer : Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.

What is 30 rounding to nearest ten?

Description : What is 30 rounding to nearest ten?

Last Answer : 30

Which of the following is a group of terms related to landscape design principles? a. Stratify, random, curvature b. Focalization, proportion, simplicity c. Hogarth, symmetrical, curvature d. Thresh, rounding, complexity

Description : Which of the following is a group of terms related to landscape design principles? a. Stratify, random, curvature b. Focalization, proportion, simplicity c. Hogarth, symmetrical, curvature d. Thresh, rounding, complexity

Last Answer : Focalization, proportion, simplicity

How can we keep the mattress pad and sheets from coming off the corners of the bed?

Description : How can we keep the mattress pad and sheets from coming off the corners of the bed?

Last Answer : answer:There is a nifty little device somewhat like a bungie cord, except flat, that clips to the corners of the sheet/mattress pad and then goes under the mattress and clips to the mattress pad kitty corner to ... I can find a link. Here is link. These aren't exactly what I use, but very similar.

A metallic sheet is of rectangular shape with dimensions 48 cm x 36 cm. From each of its corners, a square of 8 cm is cut-off and an open box is made of the remaining sheet. Find the volume of the box. -Maths 9th

Description : A metallic sheet is of rectangular shape with dimensions 48 cm x 36 cm. From each of its corners, a square of 8 cm is cut-off and an open box is made of the remaining sheet. Find the volume of the box. -Maths 9th

Last Answer : When squares of 8 cm is cutt-off from rectangulare sheet then, Length of box (l) = (98 - 8 - 8) = 32 cm Breadth of box (b) = (36 - 8 - 8) = 20 cm Height of box (h) = 8cm ∴ Volume of box = lbh = 32 x 20 x 8 = 5120 cm3

A metallic sheet is of rectangular shape with dimensions 48 cm x 36 cm. From each of its corners, a square of 8 cm is cut-off and an open box is made of the remaining sheet. Find the volume of the box. -Maths 9th

Description : A metallic sheet is of rectangular shape with dimensions 48 cm x 36 cm. From each of its corners, a square of 8 cm is cut-off and an open box is made of the remaining sheet. Find the volume of the box. -Maths 9th

Last Answer : When squares of 8 cm is cutt-off from rectangulare sheet then, Length of box (l) = (98 - 8 - 8) = 32 cm Breadth of box (b) = (36 - 8 - 8) = 20 cm Height of box (h) = 8cm ∴ Volume of box = lbh = 32 x 20 x 8 = 5120 cm3

A metallic sheet is of rectangular shape with dimensions 28m × 36m. From each of its corners, a square is cut off so as to make an open box. -Maths 9th

Description : A metallic sheet is of rectangular shape with dimensions 28m × 36m. From each of its corners, a square is cut off so as to make an open box. -Maths 9th

Last Answer : R.E.F image Volume of box =l×b×h From the diagram l=48−2(8) ∵ Two square formed side =32m b=36−2(8) =20m Also h=8m from question ∴ Volume =32×20×8 =5120m3

Why are many mailboxes shaped like arches?

Description : Why are many mailboxes shaped like arches?

Last Answer : I think it makes sense. Ease of construction. A sloping roof to let water roll down. A flat bottom to lay letters.

Help with high arches (feet): Do you have them, did cushioned shoes help?

Description : Help with high arches (feet): Do you have them, did cushioned shoes help?

Last Answer : I'm struggling with problem feet and have had two sets of orthotics moulded for me and they've both have errors' so have been sent back. I've not found anywhere that makes special shoes for the likes of us ... help a little but I'm having problems in my calves now so I know I need to get it sorted!

Do the arches of your feet ever feel like they are going to break if you take another step?

Description : Do the arches of your feet ever feel like they are going to break if you take another step?

Last Answer : I’ve had that happen before after a 12 hour shift in crappy shoes. I went home, took of the shoes, soaked my feet in warm water and then massaged them. The next day I went out and bought a better pair of shoes to wear at work.