Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Maximum stability of white phosphorous is at
(A) Very high pressure
(B) Atmospheric pressure
(C) Room temperature
(D) > 600°C
by

1 Answer

Answer :

(D) > 600°C
by

Related questions

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air

A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Description : A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Last Answer : Answer : b

White phosphorous is stored under water, because (A) It does not react with water (B) It is poisonous (C) Its kindling temperature in dry air is very low (D) It is unstable

Description : White phosphorous is stored under water, because (A) It does not react with water (B) It is poisonous (C) Its kindling temperature in dry air is very low (D) It is unstable

Last Answer : (C) Its kindling temperature in dry air is very low

Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into CaO and CO2 (C) The sand stone with silicates resist a fire in a better way (D) All the above

Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Description : Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in phosphate rock which is chemically Ca10 (PO4 )6 (F, Cl, OH) (C) Urea is more hygroscopic than ammonium nitrate (D) Nitrogen fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Last Answer : (C) Urea is more hygroscopic than ammonium nitrate

A Rotameter through which air at room temperature and atmospheric pressure is flowing gives a certain reading for a flow rate of 100 cc/sec. If helium (molecular weight 4) is used and Rotameter shows the same reading, the flow rate (cc/sec) is(A) 26(B) 42(C) 269(D) 325

Description : A Rotameter through which air at room temperature and atmospheric pressure is flowing gives a certain reading for a flow rate of 100 cc/sec. If helium (molecular weight 4) is used and Rotameter shows the same reading, the flow rate (cc/sec) is (A) 26 (B) 42 (C) 269 (D) 325

Last Answer : (C) 269

In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at(A) Low pressure(B) High pressure(C) Very high temperature(D) Atmospheric pressure; as the pressure has no effect on conversion

Description : In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at (A) Low pressure (B) High pressure (C) Very high temperature (D) Atmospheric pressure; as the pressure has no effect on conversion

Last Answer : (B) High pressure

Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Description : Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Last Answer : (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils

During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Description : During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is a Non Metal that remains Liquid at room temperature? A. Phosphorous B. Bromine (Answer) C. Chlorine D. Helium

Description : Which of the following is a Non Metal that remains Liquid at room temperature? A. Phosphorous B. Bromine (Answer) C. Chlorine D. Helium

Last Answer : B. Bromine (Answer)

Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Description : Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Last Answer : (C) Vaporisation followed by condensation

The product obtained after the heating of White Phosphorous at a high temperature is?

Description : The product obtained after the heating of White Phosphorous at a high temperature is?

Last Answer : Black Phosphorous

Pick out the wrong statement (A) The concentric atmosphere layer just above troposphere is called stratosphere, which is rich in ozone (B) Mesosphere is characterised by very low atmospheric pressure and low temperature (C) Troposphere is a dusty zone containing water vapor and clouds (D) The radio waves used in the long distance radio communication are reflected back to earth by stratosphere

Description : Pick out the wrong statement (A) The concentric atmosphere layer just above troposphere is called stratosphere, which is rich in ozone (B) Mesosphere is characterised by very low atmospheric ... radio waves used in the long distance radio communication are reflected back to earth by stratosphere

Last Answer : (D) The radio waves used in the long distance radio communication are reflected back to earth by stratosphere

From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Description : From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Last Answer : a) CH4, H2, NH3 and water vapor at 800°C

Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Description : Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Last Answer : c) 600°C

The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Description : The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Last Answer : • 300 to 350°C

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

Film boiling occurs at __________ pressure. (A) Atmospheric (B) Sub-atmospheric (C) Negative (D) Very high

Description : Film boiling occurs at __________ pressure. (A) Atmospheric (B) Sub-atmospheric (C) Negative (D) Very high

Last Answer : (D) Very high

The plume rise in a coal based power plant depends on: (i) Buoyancy (ii) Atmospheric stability (iii) Momentum of exhaust gases Identify the correct code (A) (i) and (ii) only (B) (ii) and (iii) only (C) (i) and (iii) only (D) (i), (ii) and (iii)

Description : The plume rise in a coal based power plant depends on: (i) Buoyancy (ii) Atmospheric stability (iii) Momentum of exhaust gases Identify the correct code (A) (i) and (ii) only (B) (ii) and (iii) only (C) (i) and (iii) only (D) (i), (ii) and (iii)

Last Answer : (B) (ii) and (iii) only

Heavy duty bearings are usually made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Zinc

Description : Heavy duty bearings are usually made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Zinc

Last Answer : (A) White metal

Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Description : Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Last Answer : (B) Phosphorous bronze

Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Description : Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Last Answer : (B) Phosphorous bronze

Both white phosphorous as well as red phosphorous (A) Are soluble in CS2 (B) Burns when heated in air (C) Reacts with hot caustic soda solution to give Phosphine (D) All (A), (B), and (C)

Description : Both white phosphorous as well as red phosphorous (A) Are soluble in CS2 (B) Burns when heated in air (C) Reacts with hot caustic soda solution to give Phosphine (D) All (A), (B), and (C)

Last Answer : (B) Burns when heated in air

Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Description : Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Last Answer : (A) Ortho-phosphoric acid

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

The most stable allotropic form of phosphorous is the __________ phosphorous. (A) White (B) Black (C) Yellow (D) Red

Description : The most stable allotropic form of phosphorous is the __________ phosphorous. (A) White (B) Black (C) Yellow (D) Red

Last Answer : (B) Black

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Description : Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Last Answer : Option B

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming tendency (B) Greater tendency of decomposition at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Description : Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming ... at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

White phosphorous on reaction with `NaOH` gives `PH_(3)` and

Description : White phosphorous on reaction with `NaOH` gives `PH_(3)` and

Last Answer : White phosphorous on reaction with `NaOH` gives `PH_(3)` and A. `Na_(2)HPO_(3)` B. `NaH_(2)PO_(2)` C. `NaH_(2)PO_(3)` D. `Na_(3)PO_(4)`

The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is.

Description : The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is.

Last Answer : The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is. A. `PCl_(3)` B. `SO_(2)Cl_(2)` C. `SCl_(2)` D. `POCl_(3)`

White phosphorous on reaction with `NaOH` gives `PH_(3)` and

Description : White phosphorous on reaction with `NaOH` gives `PH_(3)` and

Last Answer : White phosphorous on reaction with `NaOH` gives `PH_(3)` and A. `Na_(2)HPO_(3)` B. `NaH_(2)PO_(2)` C. `NaH_(2)PO_(3)` D. `Na_(3)PO_(4)`

The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is.

Description : The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is.

Last Answer : The product formed in the reaction of `SOCl_2` (thionyl chloride) with white phosphorous is. A. `PCl_(3)` B. `SO_(2)Cl_(2)` C. `SCl_(2)` D. `POCl_(3)`

White phosphorous burns in atmosphere at?

Description : White phosphorous burns in atmosphere at?

Last Answer : 30°C

White phosphorous is kept in?

Description : White phosphorous is kept in?

Last Answer : Water

White Phosphorous is place under the

Description : White Phosphorous is place under the

Last Answer : Cold water

The ink of a pen leaks out in an airplane because (a) Atmospheric pressure increases (b) Pressure of ink inside is more than the ambient pressure (c) High speed of the aeroplane (d) Temperature difference

Description : The ink of a pen leaks out in an airplane because (a) Atmospheric pressure increases (b) Pressure of ink inside is more than the ambient pressure (c) High speed of the aeroplane (d) Temperature difference

Last Answer : Ans:(b)

Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid and gas can be used to produce energy. (2) The process occurs at a temperature above 430°C at atmospheric pressure. (3) The process occurs under high pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Description : Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid ... pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Last Answer : (2) The process occurs at a temperature above 430°C at atmospheric pressure. Explanation: Pyrolysis is a thermo-chemical decomposition of organic material at elevated temperatures in the ... . Pyrolysis generally takes place well above atmospheric pressure at temperatures exceeding above 430 °C.

The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Last Answer : (2) low atmospheric pressure Explanation: At higher altitudes, the air pressure is decreased, which forces water's boiling point to lower. The air pressure decreases with altitude because of the ... of air. The lowered boiling point of water requires an increase in cooking times or temperature.

In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Description : In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Last Answer : a) much less than atmospheric pressure

Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid and gas can be used to produce energy. (2) The process occurs at a temperature above 430°C at atmospheric pressure. (3) The process occurs under high pressure at temperature above 430° C. (4) It is a thermochemical decomposition of organic waste

Description : Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant ... high pressure at temperature above 430° C. (4) It is a thermochemical decomposition of organic waste

Last Answer : The process occurs at a temperature above 430°C at atmospheric pressure.

The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Last Answer : low atmospheric pressure

LPG when brought to atmospheric pressure & temperature will be a (A) Liquid lighter than water (B) Liquid heavier than water (C) Gas lighter than air (D) Gas heavier than air

Description : LPG when brought to atmospheric pressure & temperature will be a (A) Liquid lighter than water (B) Liquid heavier than water (C) Gas lighter than air (D) Gas heavier than air

Last Answer : (D) Gas heavier than air

. Sodium melts (at atmospheric pressure) at a temperature of __________ °C. (A) 58 (B) 98 (C) 348 (D) 588

Description : . Sodium melts (at atmospheric pressure) at a temperature of __________ °C. (A) 58 (B) 98 (C) 348 (D) 588

Last Answer : (B) 98

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Water always boils when its (A) Temperature reaches 100° C (B) Vapour pressure equals 76 cm of Hg (C) Saturated vapour pressure equals the external pressure on its surface (D) Saturated vapour pressure is less than the atmospheric pressure

Description : Water always boils when its (A) Temperature reaches 100° C (B) Vapour pressure equals 76 cm of Hg (C) Saturated vapour pressure equals the external pressure on its surface (D) Saturated vapour pressure is less than the atmospheric pressure

Last Answer : (C) Saturated vapour pressure equals the external pressure on its surface

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point