In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88
Description : What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz
Last Answer : C. 36 MHz
Description : What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz
Last Answer : C. 4 MHz
Description : What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz
Description : Sixteen different levels (symbols) are used to encode binary data. The channel bandwidth is 36 MHz. The maximum channel capacity is
Last Answer : 288 Mbps
Description : What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz
Last Answer : C. 70 MHz
Last Answer : VHF range is between (MHz) 30-300
Description : How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48
Last Answer : B. 12
Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps
Last Answer : B. 72 Mbps
Description : Theoretical bandwidth requirement for FM system is: (1) Same as that of the modulating signal bandwidth (2) Twice of modulating signal Bandwidth (3) Thrice as of modulating signal Bandwidth (4) Infinite
Last Answer : Theoretical bandwidth requirement for FM system is: Infinite
Description : A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is _____kHz. (A) 50000 (B) 0.2 (C) 600 (D) 5
Last Answer : A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is 5 kHz.
Last Answer : The bandwidth of optical fiber 900M Hz.
Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz
Description : What is the maximum color TV bandwidth? A. 1.6 MHz B. 0.5 MHz C. 1.0 MHz D. 1.3 MHz
Last Answer : D. 1.3 MHz
Description : With a 30 m long coaxial cable, the bandwidth can exceed A. 100 MHz B. 1000 MHz C. 50 MHz D. 300 MHz
Last Answer : 100 MHz
Description : What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above
Last Answer : 3 MHz
Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz
Last Answer : C. 2 GHz
Description : The unity gain bandwidth of an inverting amplifier is 10 MHz What would be the bandwidth if the gain is increased to 10 V/V? A) 100 MHz B) 1 MHz C) 10 MHz D) 1 kHz
Last Answer : The unity gain bandwidth of an inverting amplifier is 10 MHz What would be the bandwidth if the gain is increased to 10 V/V? A) 100 MHz B) 1 MHz C) 10 MHz D) 1 kHz
Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz
Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz
Last Answer : In AM the amplitude of carrier components remains constant, while in FM it does not remain constant.
Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz
Last Answer : B. 1.25 MHz
Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259
Last Answer : B. 258
Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz
Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz
Description : A 4.5-MHz signal which is equal to the difference between the picture and sound RF carrier frequencies in a 6-MHz TV channel.
Last Answer : Intercarrier frequencY
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly
Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz
Description : What is the most commonly used intermediate frequency of radar receivers? A. 40 MHz B. 60 MHz C. 70 MHz D. 30 MHz
Last Answer : D. 30 MHz
Description : What is the common up-converter and down-converter IF for microwave communications? A. 60 MHz B. 80 MHz C. 120 MHz D. 70 MHz
Last Answer : D. 70 MHz
Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted
Last Answer : C. Type of modulation of the main carrier
Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz
Last Answer : B. 200 kHz
Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted
Last Answer : D. Type of information to be transmitted
Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier
Last Answer : D. Type of modulation of the main carrier
Description : What is the primary advantage of DSBSC in AM? A. Reduce bandwidth over standard AM B. All of these C. It is simpler to transmit and receive than the standard AM D. No transmitter power is wasted in the carrier
Last Answer : D. No transmitter power is wasted in the carrier
Description : Variation in amplitude or frequency of carrier wave is called A. amplitude modulation B. frequency modulation C. modulation D. bandwidth
Last Answer : modulation
Description : The bandwidth required for a modulated carrier depends on:
Last Answer : the baseband frequency range
Description : Communications bandwidth that has the highest capacity and is used by microwave, cable and fibre optics lines is known as: (A) hyper-link (B) broadband (C) bus width (D) carrier wave
Last Answer : Answer: B
Description : What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz
Last Answer : B. 40 MHz
Last Answer : In order to reduce quantizing noise, one must Increase the number of standard amplitudes.
Description : Two numbers are in the ration 3:5. If 9 is subtracted from the numbers, the ratio becomes 12:23. The numbers are (A) 30, 50 (B) 36, 60 (C) 33, 55 (D) 42, 70
Last Answer : Answer: C
Description : An Aided school has only three classes which contain 70, 36 and 40students respectively. The pass percentage of these classes are30,25 and 20 respectively. The pass percentage of the aided school is A) 23 % B) 15% C) 26 % D) 30%
Last Answer : C) Total number of students passed in class1 = 30/100 *70 = 21 Total number of students passed in class 2= 25/100 *36 = 9 Total number of students passed in class 3= 20/100 *40 = 8 Total number of students passed in the school = 38 Thus, pass percentage of the school = 38 /146*100 = 26 %
Description : Since tollbooths can scan license plate numbers, why is it necessary to have an EZ Pass transponder?
Last Answer : I am sure the cost of scanning the plate is more than just giving them the money from the EZ pass.
Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder
Last Answer : A. Communication satellite
Description : Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard
Last Answer : A. transponder
Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals
Last Answer : B. bandpass filter
Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA
Last Answer : C. Modulator
Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder
Last Answer : D. transponder
Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound
Last Answer : B. Downlink
Description : What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon
Last Answer : B. Early Bird
Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder
Last Answer : D. Transponder
Description : What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580
Last Answer : C. 358