In order to reduce quantizing noise, one must

by

1 Answer

Answer :

In order to reduce quantizing noise, one must Increase the number of standard amplitudes.

by

Related questions

Crosstalk due to incomplete suppression of sidebands or to intermodulation of two or more frequency-multiplexed channels which is unintelligible is classified as A. Impulse noise B. Thermal noise C. Quantizing noise D. Miscellaneous noise

Description : Crosstalk due to incomplete suppression of sidebands or to intermodulation of two or more frequency-multiplexed channels which is unintelligible is classified as A. Impulse noise B. Thermal noise C. Quantizing noise D. Miscellaneous noise

Last Answer : D. Miscellaneous noise

Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Description : Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Last Answer : A. Crosstalk

Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Description : Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Last Answer : C. Impulse noise

Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Description : Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Last Answer : A. Quantizing noise

Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Description : Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Last Answer : A. Quantizing noise

Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Description : Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Last Answer : A. PCM

The difference between the original and reconstructed signal gives rise to A. S factor B. Quantizing noise C. S/N D. Fade margin

Description : The difference between the original and reconstructed signal gives rise to A. S factor B. Quantizing noise C. S/N D. Fade margin

Last Answer : B. Quantizing noise

What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

Which does not effect noise in a channel? A. None of these B. Bandwidth C. Temperature D. Quantizing level

Description : Which does not effect noise in a channel? A. None of these B. Bandwidth C. Temperature D. Quantizing level

Last Answer : D. Quantizing level

As the thermal noise get doubled due to the increase in a resistance the noise power get.

Description : As the thermal noise get doubled due to the increase in a resistance the noise power get.  (A) doubled (B) quadruped (C) unchanged (D) halved.

Last Answer : As the thermal noise get doubled due to the increase in a resistance the noise power get. unchanged 

Noise is primarily a variation in

Description : Noise is primarily a variation in (A) Amplitude (B) phase (C) frequency (D) none of the above

Last Answer : Noise is primarily a variation in Amplitude

Noise limiter is provided on AM receivers to

Last Answer : Noise limiter is provided on AM receivers to reduce interfering noise due to ignition system, reduce noise due to electrical storms, reduce interference due to electrical machinery.

Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Description : Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Last Answer : B. Sampling, quantizing, and coding

The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Description : The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Last Answer : C. Quantizing

Quantizing is ____

Description : Quantizing is ____

Last Answer : . A/D converter

In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

Description : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: (1) 34 and 106 (2) 52 and 88 (3) 106 and 142 (4) 34 and 142

Last Answer : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88

The power consumption of LEDS may be of the order of

Last Answer : The power consumption of LEDS may be of the order of 5 to 10 milli-amperes.

Do HDMI cables made by Monster Cables reduce noise interference?

Description : Do HDMI cables made by Monster Cables reduce noise interference?

Last Answer : Yes the Isolated Clean Power Digital Filters built in help reduce interferance

A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Description : A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Last Answer : Answer: A

Why not reduce the noise in the core by reducing the amount of flux?

Description : Why not reduce the noise in the core by reducing the amount of flux?

Last Answer : Transformer voltages are fixed by system requirements. The ratio of these voltages to the number of turns in the winding determines the amount of magnetization. This ratio of voltage to turns is determined ... flux at the normal voltage is fixed. This also fixes the level of noise and vibration.

Which of the following is not a way of minimizing if not eliminating noise? A. Use redundancy B. Increase transmitted power C. Reduce signaling rate D. Increase channel bandwidth

Description : Which of the following is not a way of minimizing if not eliminating noise? A. Use redundancy B. Increase transmitted power C. Reduce signaling rate D. Increase channel bandwidth

Last Answer : D. Increase channel bandwidth

The transmitter technique adopted to reduce the noise effect of the preceding question is called A. noise masking B. anitnoise C. noise killing D. preemphasis

Description : The transmitter technique adopted to reduce the noise effect of the preceding question is called A. noise masking B. anitnoise C. noise killing D. preemphasis

Last Answer : D. preemphasis

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Fiber optic connectors can reduce system performance by increasing what two types of noise?

Description : Fiber optic connectors can reduce system performance by increasing what two types of noise?

Last Answer : Modal and reflection.

Describe the measures to reduce noise pollution.

Description : Describe the measures to reduce noise pollution.

Last Answer : 1. Reduction in sources of noise - sources of noise pollution like heavy vehicles and old vehicles may not allowed to ply in the populated areas. 2. Noise making machines should be ... at various social functions. Unnecessary horn blowing should be restricted especially in vehicle - congested areas.

Which of the following noise must be considered at high frequencies (microwave frequencies)?

Description : Which of the following noise must be considered at high frequencies (microwave frequencies)? (1) Shot noise (2) Random noise (3) Impulse noise (4) Transit time noise

Last Answer : Which of the following noise must be considered at high frequencies (microwave frequencies)? (1) Shot noise (2) Random noise (3) Impulse noise (4) Transit time noise

State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Description : State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Last Answer : * In an instrumentation system, a transducer is used for sensing various parameters. The output of transducer is an electrical signal proportional to the physical quantity sensed such as pressure, ... monitoring and control 5) Light intensity meter 6) Measurement of flow and thermal conductivity

Which of the following statement is false? Modulation is used to:

Description : Which of the following statement is false? Modulation is used to: (1) Reduce the bandwidth used (2) Separate differing transmissions (3) Ensure that intelligence may be transmitted over long distances (4) Allow the use of practicable antennas

Last Answer : Which of the following statement is false? Modulation is used to: Reduce the bandwidth used

Indicate which one of the following is NOT an advantage of FM over AM?

Description : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Last Answer : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Theoretical bandwidth requirement for FM system is:

Description : Theoretical bandwidth requirement for FM system is: (1) Same as that of the modulating signal bandwidth (2) Twice of modulating signal Bandwidth (3) Thrice as of modulating signal Bandwidth (4) Infinite 

Last Answer : Theoretical bandwidth requirement for FM system is: Infinite

The Ku frequency band used in satellite communication (for uplink and downlink) is:

Description : The Ku frequency band used in satellite communication (for uplink and downlink) is: (1) 14 GHz and 11 GHz (2) 30 GHz and 20 GHz (3) 70 GHz and 50 GHz (4) 60 GHz and 45 GHz 

Last Answer : The Ku frequency band used in satellite communication (for uplink and downlink) is: 14 GHz and 11 GHz 

The disadvantage of CDMA system is:

Description : The disadvantage of CDMA system is: (1) Higher MAI with more user count. (2) That it needs least power consumption. (3) That it needs coherent signal. (4) That it is not suitable with PSK systems 

Last Answer : The disadvantage of CDMA system is: Higher MAI with more user count. 

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle?

Description : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

Last Answer : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

The use of non-uniform quantization leads to:

Description : The use of non-uniform quantization leads to: (1) Reduction in transmission bandwidth. (2) Increase in maximum SNR. (3) Increase in SNR for signal levels. (4) Simplification of quantization process. 

Last Answer : The use of non-uniform quantization leads to:  Increase in SNR for signal levels.

In amplitude modulation AM, if modulation index is more than 100% then:

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

In T1 digital system, the frame synchronization code repeats every

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the

Description : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is

Last Answer : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is 32 Kbits/sec

Principle of Dopper effect is used in

Description : Principle of Doppler effect is used in

Last Answer : Principle of Doppler effect is used in MTI radar and CW Doppler radar

The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Description : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Last Answer : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is 32953 bits/second

A radio transmitter is an equipment:

Description : A radio transmitter is an equipment:

Last Answer : A radio transmitter is an equipment:  for generating modulated radio frequency waves

A two cavity klystron tube is a

Description : A two cavity klystron tube is a  (A) velocity modulated tube (B) frequency modulated tube (C) Amplitude modulated tube (D) simple triode

Last Answer : A two cavity klystron tube is a velocity modulated tube

Ionosphere layer of earth is situated at

Description : Ionosphere layer of earth is situated at  (A) upto 18 kms from earth (B) from 18 to 70 km (C) 70 to 500 km (D) above 500 km

Last Answer : Ionosphere layer of earth is situated at 70 to 500 km

Which wave cannot exist inside wave guide

Description : Which wave cannot exist inside wave guide  (A) TE (B) TM (C) TEM (D) HE

Last Answer : Which wave cannot exist inside wave guide TEM 

The frequency range 30MHz - 300MHz is

Description : The frequency range 30MHz - 300MHz is  (A) medium frequency (B) very high frequency (C) super high frequency (D) Infrared frequency

Last Answer : The frequency range 30MHz - 300MHz is very high frequency

The most common device used for detection in radio receivers is

Description : The most common device used for detection in radio receivers is   (A)amplifier (B) triode (C) diode (D) transistor

Last Answer : The most common device used for detection in radio receivers is diode 

In commercial FM broadcasting, the maximum frequency deviation is normally

Description : In commercial FM broadcasting, the maximum frequency deviation is normally   (A) 5 KHz (B) 15 KHz (C) 75 KHz (D) 200 KHz

Last Answer : In commercial FM broadcasting, the maximum frequency deviation is normally 75 KHz

When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the

Description : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is   (A) 0.89159% (B) 8.9159% (C) 89.159% (D) 891.59%

Last Answer : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is 89.159%

A two port network having a 6 dB loss will give

Description : A two port network having a 6 dB loss will give  (A) an output power which is one - quarter of the input power (B) an output power which is one - half of the input power (C) an output voltage which is 0.707 of the input voltage. (D) an output power which is 0.707 of the input power.

Last Answer : A two port network having a 6 dB loss will give an output power which is one - quarter of the input power

When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ

Description : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then   (A) d = 1.5 cm (B) d is less then 1.5 cm (C) d is greater then 1.5 cm (D) d = 3 cm

Last Answer : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then d = 1.5 cm

When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then

Description : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly   (A) 0.19 (B) 0.81 (C) 0.97 (D) 1.19

Last Answer : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly 0.81