Knots in timber are (A) Defects caused by crushing fibres (B) Splits radiating from the centre (C) Speckled strains (D) Signs of branches cut off

Knots in timber are
(A) Defects caused by crushing fibres
(B) Splits radiating from the centre
(C) Speckled strains
(D) Signs of branches cut off
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The curved swellings from the growth of layers or wounds left after branches are cut off in an irregular manner are known as (A) Knots (B) Rindgalls (C) Burls (D) None of these

Description : The curved swellings from the growth of layers or wounds left after branches are cut off in an irregular manner are known as (A) Knots (B) Rindgalls (C) Burls (D) None of these

Last Answer : Answer: Option B

Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Description : Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Last Answer : Answer: Option B

what to to when some branches of plum tree have black knots fingus

Description : what to to when some branches of plum tree have black knots fingus

Last Answer : You have a wild plum tree somewhere near you.................that is what the forrester told me................keep a close eye on that fungus...................but you probably need to feed this ... horse or cow manure.......keep it away from the tree............the snow & rain will take it down.

Explain defects in timber with neat labeled sketches

Description : Explain defects in timber with neat labeled sketches

Last Answer : a) Knots: These are the bases of branches which are broken off from the tree. This occurs because of improper cutting of tree. b) Shakes: These are cracks in the timber which appear due to excessive frost or ... of timber f) Bow: This is bending along the longer side of timber.

Explain defects in timber with neat sketch.

Description : Explain defects in timber with neat sketch.

Last Answer : Types of Defects in timber are grouped into the following divisions. The main natural forces responsible for causing defects in timber are abnormal growth and rapture of tissues. 1. Knots: Bases of ... gall indicates abnormal growth and peculiar curved swellings found on the body of a tree.  

Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the dorsal surface radiating out from a central groove in the centre of the tongue C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas D. Irregularly outlined erythematous area of hyper trophic fungiform E. A fibrinous exudate on the dorsal surface F. Grooves (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

The disease of dry rot in timber is caused by (A) Lack of ventilation (B) Alternate wet and dry conditions (C) Complete submergence in water (D) None of the above

Description : The disease of dry rot in timber is caused by (A) Lack of ventilation (B) Alternate wet and dry conditions (C) Complete submergence in water (D) None of the above

Last Answer : Answer: Option A

Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes ‘powdery’ form of decay in wood. Which of these statements are correct? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Description : Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes powdery' form of decay in ... ? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Last Answer : (a) 1, 2 and 3

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

Why does the speckled coat of a young deer help it to survive?

Description : Why does the speckled coat of a young deer help it to survive?

Last Answer : Need answer

How did the red herring in the speckled band mislead the characters?

Description : How did the red herring in the speckled band mislead the characters?

Last Answer : Need answer

The fish which is flat and speckled and is hard to see on the see bed?

Description : The fish which is flat and speckled and is hard to see on the see bed?

Last Answer : That's called the flatfish!

Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from knots (B) The follower of the chaining operation should be more experienced than the leader (C) At the end of the tenth chain length, the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Description : Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from ... the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Last Answer : (D) All the above

What is the disease caused by toxin producing strains of Staphylococcus aureus ?

Description : What is the disease caused by toxin producing strains of Staphylococcus aureus ?

Last Answer : Toxic shock syndrome

Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working

Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working

Last Answer : Option B

Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into CaO and CO2 (C) The sand stone with silicates resist a fire in a better way (D) All the above

Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above

Last Answer : Answer: Option D

Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Description : Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Last Answer : Answer: Option A

The radial splits which are wider on the outside of the log and narrower towards the pith are known as (A) Heart shakes (B) Cupshakes (C) Starshakes (D) Rindgalls

Description : The radial splits which are wider on the outside of the log and narrower towards the pith are known as (A) Heart shakes (B) Cupshakes (C) Starshakes (D) Rindgalls

Last Answer : Answer: Option C

alas my gardener cut off the lower branches of my camellias - how do I get them to regrow?

Description : alas my gardener cut off the lower branches of my camellias - how do I get them to regrow?

Last Answer : Need Answer

for climbing roses should you cut off the dark branches by the root ball before planting

Description : for climbing roses should you cut off the dark branches by the root ball before planting

Last Answer : Need Answer

The top 6" of the branches from my mugo pine have turned brown can I cut them off.

Description : The top 6" of the branches from my mugo pine have turned brown can I cut them off.

Last Answer : Did the tops green up? If not go ahea and cut them you might get lucky and have them branch out again.

The compatibility conditions in terms of strains in a two-dimensional problem are associated with (a) Stresses (b) Forces (c) Properties of materials (d) Deformations

Description : The compatibility conditions in terms of strains in a two-dimensional problem are associated with (a) Stresses (b) Forces (c) Properties of materials (d) Deformations

Last Answer : Deformations

The superior colliculi: a. receives P fibres from the retina b. receives M fibres from the retina c. regulates saccade movement d. is the centre for pursuit movemen

Description : The superior colliculi: a. receives P fibres from the retina b. receives M fibres from the retina c. regulates saccade movement d. is the centre for pursuit movemen

Last Answer : receives M fibres from the retina

At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Description : At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Last Answer : (c) all fibres are stressed to yield point in shear

recently planted blue spruce is showing signs of dry branches with no needles

Description : recently planted blue spruce is showing signs of dry branches with no needles

Last Answer : They need to be watered every week for 1 year.

Can aliens tie knots?

Description : Can aliens tie knots?

Last Answer : Yes. A very basic skill if you have to tie something together, like a safety tether or a broken wire. Or the Captain’s feelers during a mutiny.

The "knots" that are in your back; what are they and what causes them?

Description : The "knots" that are in your back; what are they and what causes them?

Last Answer : These are typically the results of physical and/or psychological stress that induces severe musculoskeletal (muscular) stress that, as a result of anaerobic respiration, produces an excess buildup of lactic acid in the muscle cells.

Why do I have so many knots in my shoulders and back?

Description : Why do I have so many knots in my shoulders and back?

Last Answer : Is the tension in your muscles caused by stress? Lack of sleep? Lack of stretching? Do you slouch? Have you tried acupuncture? Yoga? Meditation? Are you on medication for migraines? More details, please. I suffer from chronic migraines & insomnia, take meds, do exercise/meditation-etc also

How does your hair get those tiny knots?

Description : How does your hair get those tiny knots?

Last Answer : I honestly have no idea, but I get them once in a while, too. I’ve wondered the same thing but didn’t figure anyone would know the answer.

The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Description : The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Last Answer : a.Control points

Why does the tree have knots?

Description : Does that mean there was a branch there?

Last Answer : Yes, the knot is actually the rest of the branch that grew up in that place.

If you are going 20 knots in open water how long will it take to go 140 nautical miles?

Description : If you are going 20 knots in open water how long will it take to go 140 nautical miles?

Last Answer : 1 knot = 1 nautical mile per hourtime = distance ÷ speed= 140 nautical miles ÷ 20 nautical miles per hour= 7 hours.

Who played in Knots Landing?

Description : Who played in Knots Landing?

Last Answer : I was named after her. ( my name is Paige) The Actress that played Paige Matheson is Nicolette Sheridan

Less number of knots in cotton is termed as

Description : Less number of knots in cotton is termed as

Last Answer : Ans.Superior quality cotton

My tomato plants are stunted and have pale yellow foliage. The root system has knots or swelling on the roots.

Description : My tomato plants are stunted and have pale yellow foliage. The root system has knots or swelling on the roots.

Last Answer : A. These are root-knot nematodes. Some varieties such as Celebrity and Better Boy resist this problem. It is best to use only nematode-resistant varieties. Nematode resistance is shown by the letter N after the name; for example, Celebrity VFN.

What cord is always full of knots, not one of which can be untied?

Description : What cord is always full of knots, not one of which can be untied?

Last Answer : A cord of wood.

The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Description : The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Last Answer : Answer: Option D

The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Description : The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Last Answer : (D) All the above

The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option D

Dry rot (A) Cracks the timber (B) Reduces the strength of timber (C) Reduces the timber to powder (D) Spoils the appearance of timber

Description : Dry rot (A) Cracks the timber (B) Reduces the strength of timber (C) Reduces the timber to powder (D) Spoils the appearance of timber

Last Answer : Answer: Option C

The presence of original rounded surface on the manufactured piece of timber, is called (A) Wane (B) Torn grain (C) Diagonal grain (D) Chipmark

Description : The presence of original rounded surface on the manufactured piece of timber, is called (A) Wane (B) Torn grain (C) Diagonal grain (D) Chipmark

Last Answer : Answer: Option A

Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a (A) Cant (B) Deal (C) Baulk (D) Strip

Description : Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a (A) Cant (B) Deal (C) Baulk (D) Strip

Last Answer : Answer: Option C

A well seasoned timber may contain moisture up to (A) 4 to 6 % (B) 6 to 8 % (C) 8 to 10 % (D) 10 to 12 %

Description : A well seasoned timber may contain moisture up to (A) 4 to 6 % (B) 6 to 8 % (C) 8 to 10 % (D) 10 to 12 %

Last Answer : Answer: Option D

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Description : A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Last Answer : Answer: Option D

The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option B

The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option C

The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C