The harmonious mixing of the clay ingredients, is known as (A) Weathering (B) Blending (C) Tempering (D) None of these

The harmonious mixing of the clay ingredients, is known as
(A) Weathering
(B) Blending
(C) Tempering
(D) None of these
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying

Description : The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying

Last Answer : Answer: Option A

Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Description : Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Last Answer : (A) Mixing highly viscous pastes

Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Description : Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Last Answer : (B) Non-flowing powder and thin pastes

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Last Answer : (D) Batching

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Last Answer : [ D ] Batching

The mineral weathering and clay formation are rapid where the climate is- (a) Warm and moist (b) Warm and dry (c) Cold and moist (d) Cold and dry

Description : The mineral weathering and clay formation are rapid where the climate is- (a) Warm and moist (b) Warm and dry (c) Cold and moist (d) Cold and dry

Last Answer : (c) Cold and moist

Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and laminated clays c) Soils containing carbon of coal underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Description : Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and ... underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Last Answer : a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering*

Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Description : Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Last Answer : (B) Pug mill

A pug mill is used for (A) Softening brick earth (B) Moulding brick earth (C) Tempering brick earth (D) Providing brick earth

Description : A pug mill is used for (A) Softening brick earth (B) Moulding brick earth (C) Tempering brick earth (D) Providing brick earth

Last Answer : Answer: Option C

Do democracies lead to peaceful and harmonious relations among citizens? -SST 10th

Description : Do democracies lead to peaceful and harmonious relations among citizens? -SST 10th

Last Answer : . Democracies usually develop a procedure to conduct their competition. This reduces the possibility of these tensions becoming explosive or violent. . No society can fully and permanently resolve ... differences, divisions and conflicts is, thus, a definite plus point of democratic regimes.

On the basis of which values will it be a fair expectation that democracy should produce a harmonious social life? Explain. -SST 10th

Description : On the basis of which values will it be a fair expectation that democracy should produce a harmonious social life? Explain. -SST 10th

Last Answer : Democracies across the globe have been successful to a great extent in accommodating social diversities and therefore it will be a fair expectation that democracy must produce a harmonious social life ... the people together. For example - India is the best-suited example of representing diversity.

Democracies lead to peaceful and harmonious life among citizens.' Support the statement with suitable examples. -SST 10th

Description : Democracies lead to peaceful and harmonious life among citizens.' Support the statement with suitable examples. -SST 10th

Last Answer : Democracies lead to peaceful harmonious life among citizens: 1. No society has a permanent solution for the differences that can come up between various groups in it. 2. But democracy ... in the decision making. 5. Democracy reduces the chances of differences or conflicts becoming violent.

Do democracies lead to peaceful and harmonious life among citizens ? -SST 10th

Description : Do democracies lead to peaceful and harmonious life among citizens ? -SST 10th

Last Answer : Democracies across the globe have been successful to a great extent in accommodating social diversities and therefore it will be a fair expectation that democracy must produce a harmonious social life. ... the term 'majority' as well as the need to accommodate minority groups and their preferences.

How does democracy lead to peaceful and harmonious life among citizens? Explain. -SST 10th

Description : How does democracy lead to peaceful and harmonious life among citizens? Explain. -SST 10th

Last Answer : (i) Democracies accommodate various social divisions. For example, Belgium has peacefully solved her ethnic problems and solved the differences. (ii) All democracies usually develop a procedure to conduct ... .All these things ensured by a democratic regime lead to a peaceful and harmonious life.

On the basis of which values will it be a fair expectation that democracy should produce a harmonious social life? -SST 10th

Description : On the basis of which values will it be a fair expectation that democracy should produce a harmonious social life? -SST 10th

Last Answer : (i) A democratic country looks into the needs and aspirations of every section of society. It is also able to handle social conflicts, divisions and differences. (ii) The government of ... of democracy, it is a fair expectation that a democratic country should produce a harmonious social life.

“Democracies lead to peaceful and harmonious life among citizens.” Support the statement with any three suitable arguments. -SST 10th

Description : “Democracies lead to peaceful and harmonious life among citizens.” Support the statement with any three suitable arguments. -SST 10th

Last Answer : The statement is correct that democracy leads to peaceful and harmonious life. Arguments for the statement: (i) Democracies accommodate various social divisions. (ii) Democracies usually ... permanently resolve conflicts among different groups. We can certainly learn to respect these differences

What is harmonious ecological interaction ?

Description : What is harmonious ecological interaction ?

Last Answer : Harmonious, or positive, ecological interaction is that in which none of the participating beings is harmed.

For harmonious development of the personality of the child, parent should Options: A) overprotect the child. B) regularly compare the child with other children. C) provide conducive environment at home. D) engage qualified teachers.

Description : For harmonious development of the personality of the child, parent should Options: A) overprotect the child. B) regularly compare the child with other children. C) provide conducive environment at home. D) engage qualified teachers.

Last Answer : C) provide conducive environment at home. 

Blending Drama with Comedy in a Web Series?

Description : Blending Drama with Comedy in a Web Series?

Last Answer : answer:Bravo for your creative efforts. That's wonderful. I don't really have any tips, because I've never written a web series or tv series. I just want to point out that the series can be anything ... like the sound of mixing drama and comedy. It gives the jokes some meat. Best of luck to you.

Mughal architecture reveals a blending of which styless? -Do You Know?

Description : Mughal architecture reveals a blending of which styless? -Do You Know?

Last Answer : answer:

Is this statement true or falseThe Constitutional Convention rejected Roger Sherman's compromise blending the Virginia and New Jersey Plans?

Description : Is this statement true or falseThe Constitutional Convention rejected Roger Sherman's compromise blending the Virginia and New Jersey Plans?

Last Answer : pleas answer me I need it or don't you do you

What do you call a polymer without adding additives or blending with another ploymer?

Description : What do you call a polymer without adding additives or blending with another ploymer?

Last Answer : Need answer

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Description : Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Last Answer : (B) Blending of immiscible liquids

Seed work board is ‘required for? A. Viability test of seed B. Germination test of seed C. Purity test of seed D. Blending of seed

Description : Seed work board is ‘required for? A. Viability test of seed B. Germination test of seed C. Purity test of seed D. Blending of seed

Last Answer : D. Blending of seed

If Mendel had studied the seven traits using a plant with 12 chromosomes instead of 14, in what way would his interpretation have been different? (a) He would not have discovered the law of independent assortment. (b) He would have discovered sex linkage. (c) He could have mapped the chromosome. (d) He would have discovered blending or incomplete dominance.

Description : If Mendel had studied the seven traits using a plant with 12 chromosomes instead of 14, in what way would his interpretation have been different? (a) He would not have discovered the law of ... c) He could have mapped the chromosome. (d) He would have discovered blending or incomplete dominance.

Last Answer : He would not have discovered the law of

Which one of the following cannot be explained on the basis of Mendel’s law of dominance? (a) The discrete unit controlling a particular character is called a factor. (b) Out of one pair of factors one is dominant, and the other recessive. (c) Alleles do not show any blending and both the characters recover as such in F2 generation. (d) Factors occur in pairs.

Description : Which one of the following cannot be explained on the basis of Mendel's law of dominance? (a) The discrete unit controlling a particular character is called a factor. (b) Out of one pair of ... any blending and both the characters recover as such in F2 generation. (d) Factors occur in pairs.

Last Answer : (c) Alleles do not show any blending and both the characters recover as such in F2 generation

Fuel consumption in coke making can be reduced by (A) Preheating, blending and de-ashing the coal (B) Stamped charging of coal (C) Dry quenching of coke (D) All (A), (B) and (C)

Description : Fuel consumption in coke making can be reduced by (A) Preheating, blending and de-ashing the coal (B) Stamped charging of coal (C) Dry quenching of coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Brazilian physicist and astronomer_______ was awarded the 2019 Templeton prize, worth $1.4 million, for his work blending science and spirituality

Description : Brazilian physicist and astronomer_______ was awarded the 2019 Templeton prize, worth $1.4 million, for his work blending science and spirituality

Last Answer : Marcelo Gleiser

The term "marketing mix" describes: A. A composite analysis of all environmental factors inside and outside the fir B. A series of business decisions that aid in selling a product C. The relationship between a firm's marketing strengths and its business weaknesses D. A blending of four strategic elements to satisfy specific target markets

Description : The term "marketing mix" describes: A. A composite analysis of all environmental factors inside and outside the fir B. A series of business decisions that aid in selling a product ... strengths and its business weaknesses D. A blending of four strategic elements to satisfy specific target markets

Last Answer : D. A blending of four strategic elements to satisfy specific target markets

The term "marketing mix" describes: A. A composite analysis of all environmental factors inside and outside the fir B. A series of business decisions that aid in selling a product C. The relationship between a firm's marketing strengths and its business weaknesses D. A blending of four strategic elements to satisfy specific target markets

Description : The term "marketing mix" describes: A. A composite analysis of all environmental factors inside and outside the fir B. A series of business decisions that aid in selling a product ... strengths and its business weaknesses D. A blending of four strategic elements to satisfy specific target markets

Last Answer : D. A blending of four strategic elements to satisfy specific target markets

Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite (B) Dr. L. Bakeland, a Belgian scientist prepared a product known as Bakelite (C) Pollark, an Austrian scientist prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Description : Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite ... prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Last Answer : Answer: Option D

The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing

Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing

Last Answer : (D) Solution annealing

Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these

Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these

Last Answer : (B) Tempering

The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these

Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these

Last Answer : (B) Normalising

. To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Last Answer : (A) Spheroidising

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing

Description : Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing

Last Answer : (B) Stress relieving

Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Last Answer : (B) Tempering

What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Last Answer : (B) 200-300

Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (A) Normalising

Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening

Description : Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening

Last Answer : (B) Annealing

Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising

Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising

Last Answer : (D) Carburising